| New Wi-Fi | Wi-Fi 6/6E Products |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4 x 4 MU-MIMO Wi-Fi 6E Transceiver Chip | |
RF Transceiver
from Palma Ceia SemiDesign
|
| The PCS1100 from Palma Ceia SemiDesign is a 4 x 4 MU-MIMO Wi-Fi 6E Transceiver Chip that covers all three Wi-Fi bands - 2.4, 5, and 6 GHz. It offers excellent receiver sensitivity for reliable connections at a longer range and supports a dual-concurrent mode that allows simultaneous operation on two frequency bands. The transceiver chip provides excellent phase noise and linearity performance to ensure better Tx and Rx EVM specifications. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 2.4/5-7 GHz BAW Diplexer for Wi-Fi Applications | |
Diplexer
from Qorvo
|
| The QPQ2456 from Qorvo is a BAW Diplexer that operates from 2402 - 2472 MHz and 5150 - 7125 MHz. This high-performance diplexer takes advantage of Qorvo's edgeBoost technologies to deliver extremely steep skirts, while exhibiting low loss in the Wi-Fi bands and high near-in rejection to meet regulatory restricted band emissions, to a diplexer that has a low loss bandpass covering UNII1-8 Wi-Fi channels. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Tri-Band Wi-Fi 6/6E + Bluetooth 5.2 + Doppler Radar Chip for IoT Applications | |
Wireless SoC
from Celeno
|
| The CL6025 from Celeno is a 2x2 Wi-Fi 6/6E and Bluetooth 5.2 Chip with Celeno's novel Wi-Fi Doppler Imaging technology for Wi-Fi sensing capabilities. The module supports Tri-band switchable Wi-Fi with a data rate of up to 2.4 Gbps and has 160 MHz channels. It supports 802.11ax R2 (Wi-Fi 6/6E) features like beamforming, Multi-User MIMO & OFDMA. The chipset also supports Bluetooth modulations and protocols like BT Classic, BR, EDR & BLE for excellent performance under dense and demanding deployments. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Miniature Chip Antenna for Wi-Fi & Bluetooth Applications | |
Antenna
from ignion
|
| The NANO mXTEND™ (NN02-101) from Ignion is a Miniature Wi-Fi and Bluetooth Antenna that is optimized for operation from 2400 to 2500 MHz but can operate up to 8 GHz. It is the smallest off-the-shelf antenna for Wi-Fi with customizable performance. This linearly polarized antenna provides a peak gain of 2.4 dBi with an efficiency of more than 70%. It is ideal for use in IoT modules, smart homes, tracking devices, wearables and gaming devices. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 5/6 GHz Embedded PCB Wi-Fi Antenna Family | |
Antenna
from AVX Corporation
|
| The W2P15x7W04 Family from AVX is a series of Embedded Wi-Fi Antennas that operate from 5150-5850 MHz and 5925-7127 MHz. They provide a peak gain of 4.5 dBi, have a return loss of 9 dB and efficiency up to 70%. These embedded Wi-Fi Antennas are designed with foam on the back side to minimize the detuning of the antenna on different surfaces which results in a miniaturized design and superior signal sensitivity. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| 4x4 MU-MIMO Single Band Wi-Fi 6 Module | |
RF Module
from Compex Systems
|
| The WLE3000H5 from Complex is a 4x4 MU-MIMO Single Band Wi-Fi 6 Module that operates from 4920 to 5850 MHz / 5150 to 5850 MHz. This 802.11 ax module has a data rate of up to 4804 Mbps. The module is based on Qualcomm's Atheros QCN9024/9074 chipset and supports Dynamic Frequency Selection (DFS), and OFDMA techniques. It can be controlled by I2C and PCIe 3.0 interfaces. |
| |
Download Datasheet |
Product Details | |
|
