1. everything RF
  2. RF Newsletters
more
PREV 15 Sept, 2021 NEXT

New RF and Microwave Products this Week

15 Sept, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 15 Sept, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
Fixed Attenuator
0-20 dB Fixed Chip Attenuators from DC to 50 GHz

Fixed Attenuator  from Smiths Interconnect

The TSX Series from Smiths Interconnect are Fixed Chip Attenuators that operate from DC to 50 GHz. These attenuators are available in attenuation values of 0-10 (with a 1 dB step size), 15, & 20 dB. They can handle a CW input power of up to 10 W and have a VSWR of less than 1.25:1. These attenuators are available in surface-mount packages.
Download Datasheet | Product Details
Cellular Module
150 Mbps LTE Cat 4 Module for Telematics and Surveillance Applications

Cellular Module  from SIMCom

The A7602E-H from SIMCom is an LTE Cat 4 Module that supports LTE-TDD/LTE-FDD/HSPA+/GSM/GPRS/EDGE standards. It has an uplink rate of up to 50 Mbps and a downlink of up to 150 Mbps. This multiband module supports multiple built-in network protocols, drivers for main operation systems (USB driver for Windows, Linux, and Android, etc.), and can be controlled via AT commands.
Download Datasheet | Product Details
Cellular Module
LPWA Module for Global LTE/EGPRS Applications

Cellular Module  from Quectel

The BG95-M3 from Quectel is a multi-mode LPWA Module that supports LTE Cat M1/Cat NB2/EGPRS and has an integrated GNSS receiver. It is 3GPP Release-14 compliant and offers a maximum data rate of 588 Kbps downlink and 1119 Kbps uplink with LTE Cat M1. The module uses integrated RAM/flash as well as the ARM Cortex A7 processor supporting ThreadX for ultra-low power consumption.
Download Datasheet | Product Details
RF Switch
AlGaAs SP3T Switch from 2 to 22 GHz

RF Switch  from MACOM

The MASW-011130 from MACOM is an SP3T PIN Diode Switch that operates from 2 to 22 GHz. It has a very fast-switching speed of less than 10 ns and can handle up to 33 dBm of CW input power. The switch has an insertion loss of 1 dB and provides over 35 dB of isolation. It is fully passivated with silicon nitride and has an added polymer layer for scratch protection.
Download Datasheet | Product Details
Front End Module
10 W Front-End Module from 2700 to 3000 MHz

Front End Module  from RFHIC

The HR2730-10A from RFHIC is a Front-End Module that operates from 2700 to 3000 MHz. It has been designed for next-generation digital beamforming phased array radar applications. The hybrid device consists of a GaN on SiC transmitter and a duplexer switch at the antenna port that switches between LNA mode and Bypass mode. The Rx chain has a built-in limiter diode that protects the receiver.
Download Datasheet | Product Details
RF Upconverter
4 MHz/35 MHz Multi-Octave RF Upconverter

RF Upconverter  from NuWaves Engineering

The RF2-3000UCV1 from NuWaves Engineering is a multi-octave RF upconverter that accepts an input signal from 2 MHz to 70 MHz and upconverts it to an output signal from 2 MHz and 3000 MHz with 5 kHz tuning resolution. The upconverter is configurable via any serial terminal program or an optional graphical user interface (GUI).
Download Datasheet | Product Details
Sponsored by Mouser
Analog Devices Inc. ADL9005-EVALZ Evaluation Kit
Evaluate the wideband GaAs pHEMT ADL9005 low-noise amplifier
Analog Devices ADL9005-EVALZ Evaluation Kit features a 2-layer Rogers 4350B evaluation board with a copper-clad mounted to an aluminum heat spreader, End launch, 2.9mm RF connectors, and through calibration path (depopulated). Click here to learn more.
 
RF Amplifier
100 W Solid-State Power Amplifier from 4 to 8 GHz

RF Amplifier  from Ophir RF

The Model 4128 from Ophir RF is a Solid-State Power Amplifier that operates from 4 to 8 GHz. It delivers a saturated output power of 100 W with a gain of more than 52 dB. This amplifier utilizes Class A linear power devices and provides circuit protection against thermal overload, over-current, over-voltage, and open or short VSWR conditions. It has spurious levels of better than -60 dBc and harmonics of -20 dBc.
Download Datasheet | Product Details
RF Inductor
Rugged, Surface Mount Broadband Conical Inductors

RF Inductor  from Coilcraft

The BCR Series are conical inductors available in nine inductance values ranging from 0.22 to 8.0 uH. They were designed specifically for broadband and high frequency applications across a frequency range of 10 MHz to 40 GHz. The inductors are ideal for use in ultra-wideband bias tees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device.
Download Datasheet | Product Details
RF Amplifier
L-Band Airborne Amplifiers for IFF and TCAS Applications

RF Amplifier  from Technical Services Laboratory Inc.

The Series 1100 L-Band Airborne Amplifiers from TSL have been developed for Identification Friend-or-Foe (IFF) and for Traffic Collision Avoidance Systems (TCAS) applications. They are designed to operate at 1030 MHz and/or 1090 MHz. The amplifiers provide an output power from 5 to 4000 W, have a duty of 1 - 2% (25% short-term) and a pulse width of up to 35 µs.
Download Datasheet | Product Details
Antenna
Bluetooth/Wi-Fi/UWB Ceramic Antenna from 2.4 to 7.2 GHz

Antenna  from Johanson Technology

The 2450AD18A6050 from Johanson Technology is a Ceramic Antenna for UWB applications from 2400 to 7200 MHz. It can also be used for 2.45 GHz Bluetooth and 6 GHz Wi-Fi applications. It provides peak gain of 2.5 dBi and has a radiation efficiency of more than 79%. This single-feed antenna can handle a CW input power of 3 W and has a return loss of better than 5 dB.
Download Datasheet | Product Details
RF Surge Protector
Quarter Wave Surge Protector from 555 MHz to 4 GHz with 4.3-10 Connectors

RF Surge Protector  from Pasternack Enterprises Inc

The PE73SP1070 from Pasternack is a Quarter Wave Surge Protector that operates from 555 MHz to 4 GHz. It can handle a CW input power of up to 200 W, has an insertion loss of less than 0.1 dB, and has a VSWR of 1.18:1. It is available in a coaxial in-line package that measures 70.36 x 24.89 x 37.34 mm with a 4.3-10 Male connector at the input and 4.3-10 Female connector at the output.
Download Datasheet | Product Details
Vector Network Analyzer
Two-Port Handheld Vector Network Analyzers from 30 kHz to 26.5 GHz

Vector Network Analyzer  from Rohde & Schwarz

The R&S ZNH Series from Rohde & Schwarz are two-port handheld Vector Network Analyzers (R&S®ZNH4, R&S®ZNH8, R&S®ZNH18, R&S®ZNH26) that operate from 30 kHz to 4/8/18/26.5 GHz. They provide one-port cable and antenna measurement along with full S-parameter (S11, S12, S21, S22) measurement capability. They can be used to characterize components up to 26.5 GHz in the field and lab.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
RF Shielded Test Enclosure
Stand Alone RF Tunnel Shielded Box from 20 MHz to 40 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3590 from RF Electronics is a Stand Alone RF Tunnel Shielded Box that operates from 20 MHz to 40 GHz. This fully portable design is equipped with caster wheels for ease of movement. The interior of this enclosure measures 650(W) X 650 (H) X 2050 (L) mm. It has a thick RF absorbing foam that provides isolation of more than 120 dB @ 3 GHz.
Download Datasheet | Product Details
V2X Module
Automotive-Grade Sub-6 GHz 5G Module with eCall Support

V2X Module  from Rolling Wireless

The RN91xx from Rolling Wireless is an Automotive-Grade Release-15 5G Module that supports sub-6 GHz 5G bands, LTE-FDD, LTE-TDD, WCDMA and 2G. It supports SA/NSA network architectures and provides optional C-V2X (modem) and DSDA features. It delivers up to 2.4 Gbps download throughput and allows automotive OEMs to build a Linux-based connectivity and telematics control unit using a single module.
Download Datasheet | Product Details
Fixed Attenuator
100 Watt Fixed Attenuator from DC to 3 GHz

Fixed Attenuator  from JFW Industries

The Model 50FHLB-xxx-100 from JFW Industries is a Uni-directional 100 Watt Fixed Attenuator that operates from DC to 3 GHz. It is available with an attenuation range of 10, 20 or 30 dB. The attenuator has an integrated heatsink that is only 2.25 inches in diameter and has coaxial RF connectors (N, 4.3/10, or 7/16) matched to 50 ohms.
Download Datasheet | Product Details
Low Noise Block
Ku-Band PLL Low-Noise Block 950 to 2750 MHz

Low Noise Block  from Actox

The AL1012025 from Actox is a Ku-band PLL Low Noise Block that down-converts an input RF frequency from 10.95 - 12.75 GHz to 950 - 2750 MHz. It has a conversion gain of 55 dB, a noise figure of less than 1 dB and a P1dB of over 5 dBm. The LNB has a phase noise of -95 dBc/Hz at 100 kHz offset and provides image rejection of more than 40 dBc.
Download Datasheet | Product Details
OCXO
Ultra-Low Power Miniature OCXO from 8 to 100 MHz

OCXO  from Dynamic Engineers

The OCXO3320AW from Dynamic Engineers is an Ultra-Low Power Miniature Low Profile OCXO that operates from 8 to 100 MHz. It has a phase noise of -163 dBc/Hz @100 kHz, and frequency stability of ±5 ppb over a temperature range from -40°C to +85°C. This OCXO provides HCMOS (TTL) or Sinewave outputs while operating over a 5V supply voltage.
Download Datasheet | Product Details
Dual Directional Coupler
20 W Dual Directional Coupler from 26.5 to 50 GHz

Dual Directional Coupler  from KRYTAR

The 526550010 from Krytar is a Dual Directional Coupler that operates from 26.5 to 50 GHz. It provides 10 dB of coupling with a directivity of 10 dB and has an insertion loss of less than 3 dB. The coupler can handle an input power of 20 W and has a VSWR of less than 1.8:1. It is available in a module that measures 2.24 x 0.40 x 0.62 inches and has 2.4-mm (female) connectors.
Download Datasheet | Product Details
Voltage Controlled Oscillator
Low-Power Voltage-Controlled Oscillator from 1380 to 1415 MHz

Voltage Controlled Oscillator  from Z-COMM

The V377TE02-LF from Z-Communications is a Voltage-Controlled Oscillator (VCO) that operates from 1380 to 1415 MHz. It delivers an output power of 3 ±3 dBm with a phase noise of -106 dBc/Hz @ 10 kHz offset and typical 2nd harmonic suppression of -30 dBc. The oscillator requires a DC supply of 3 V and draws 25 mA of current. It has a tuning voltage range from 0.3 to 3.0 V.
Download Datasheet | Product Details
Waveguide Isolator
0.1 W Mini Faraday Isolator from 110 to 170 GHz

Waveguide Isolator  from ERAVANT

The STF-06S1-M from ERAVANT is a Miniature Faraday Isolator that operates from 110 to 170 GHz. It can handle up to 0.1 W of CW input power, has an insertion loss of 3 dB, and provides isolation of 23 dB. This mini-isolator utilizes a novel magnetic design that has a precision machined housing with stable and resistant performance in the presence of external stray magnetic fields.
Download Datasheet | Product Details
RF Module
Bluetooth 5.0/Wi-Fi Combination Module for Automotive Applications

RF Module  from ALPS ALPINE

The UGCZ1 from Alps Alpine is a Bluetooth 5.0/Wi-Fi (IEEE 802.11 a/b/g/n/ac) Combination Module that is designed for automotive applications. It can be controlled via PCIe, SDIO & UART interfaces and supports PCM/I2C audio interfaces. This module is available in an LGA mount package that measures 8.55 x 10.30 x 1.45 mm and is ideal for major home appliances, cameras, motorcycles, navigation/ audio systems, and HVAC applications.
Download Datasheet | Product Details
RF Amplifier
Two-Stage Unconditionally Stable RF Amplifier from 8 to 14 GHz

RF Amplifier  from Mini Circuits

The ZVE-143-S+ from Mini-Circuits is a Two-Stage RF Amplifier that operates from 8 to 14 GHz. It provides a gain of more than 16 dB, has a noise figure of less than 5.5 dB and a P1dB of up to 0.6 W. This unconditionally stable amplifier requires a DC supply of 12 V and draws under 450 mA of current. It is available in a module that measures 1.05 x 1.01 x 0.35 inches with SMA connectors.
Download Datasheet | Product Details
Signal Generator
128/256 GSa/s Multi-Functional Arbitrary Waveform Generator

Signal Generator  from Keysight Technologies

The M8199A from Keysight is an Arbitrary Waveform Generator (AWG) with an analog bandwidth of up to 70 GHz. It provides research engineers a high-performance signal source for arbitrary signals, enabling the development of designs up to 140 GBaud. The generator has high flexibility with upgrade options from 2 channels at 128 GSa/s to 4 channels at 256 GSa/s.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]