1. everything RF
  2. RF Newsletters
more
PREV 5 November, 2014 NEXT

New RF Products this Week

Nov 5, 2014 - everything RF Newsletter
 
everything RF
Date: Nov 5, 2014
 
Sponsored by Aeroflex / Inmet
 
 
 
New RF & Microwave Products this Week
Software
Wireless EM Propagation Software

Software from Remcom

Remcom’s Wireless InSite is site-specific radio propagation software for the analysis and design of wireless communication systems. It provides efficient and accurate predictions of propagation and communication channel characteristics in complex urban, indoor, rural and mixed path environments. Applications range from military defense to commercial communications, including wireless links, antenna coverage optimization, and jammer effectiveness.
 
Download Datasheet | Product Details
 
Front End Module
2.4 GHz Front End Module for Wireless LAN/BT

Front End Module from Skyworks

The SE2620T is a complete 802.11 b/g/n WLAN RF front-end module with a Bluetooth port for wireless applications in the 2.4 GHz band. It consists of a power amplifier, power detector, harmonic filter, switch, low noise amplifier with on chip matching. The FEM operates at a 3.3 V or 5.0 V supply and is available in a compact 3 x 3 x 0.6 mm, 16-pin Quad Flat No-Lead (QFN) package.
 
Download Datasheet | Product Details
 
RF Amplifier
2.4 GHz High Power Wireless LAN Power Amplifier

RF Amplifier from Skyworks

The SE2576L is an 802.11 b/g/n WLAN power amplifier module that operates from 2400 to 2500 MHz. It consists of a power amplifier, power detector, reference voltage generator and input match. The amplifier provides an average output power of 32 dBm with a small signal gain of 33 dB and requires a 5 V supply.
 
Download Datasheet | Product Details
 
RF Switch
DC to 28 GHz SPDT Non-Reflective Switch Die

RF Switch from Custom MMIC

The CMD196 from Custom MMIC is a non-reflective MMIC SPDT switch in die form. It operates from DC to 28 GHz with an insertion loss of 1.75 dB, an isolation of 46 dB (at 14 GHz) and a P1dB of 23 dBm. It has a switching speed of 1.8 ns and requires no bias supply. The switch can be used in microwave & VSAT, telecom infrastructure and military end-use applications.
 
Download Datasheet | Product Details
 
RF Amplifier
High Power Microwave Solid State Amplifier for Pulsed C-Band Applications

RF Amplifier from Hittite

The KHPA0608-XXXWP from Hittite is a C-band pulsed amplifier that operates from 6 to 8 GHz. It is available in Dodecahedron package (DDH), designed to pack a high amount of power in a small footprint. One DDH can provide up to 500 W, two DDHs will provide up to 1000 W and four DDHs will provide up to 2000 W of pulsed output power at C band frequencies.
 
Download Datasheet | Product Details
 
Sponsored by Aeroflex / Inmet
Aeroflex - Inmet
Meet the New Magic Number for 2 Watt Temperature Variable Attenuators
Push the limits of frequency without sacrificing performance. Aeroflex/Inmet’s new DC to 12 GHz Powerfilm surface mount attenuators vary with temperature and are the perfect balance of price, power, and dependability.To learn more, download the data sheet.
 
 
 
Fixed Attenuator
DC to 50 GHz Fixed 2.4 mm Attenuators

Fixed Attenuator from HASCO Components

The HA50A1-XX from HASCO Components are 2.4 mm fixed coaxial attenuator that operates from DC to 50 GHz with attenuation options available from 3 to 30 dB. The attenuators are matched to 50 Ohms with a VSWR of less than 1.75:1 and can handle up to 1 W of power.
 
Download Datasheet | Product Details
 
90 Degree Hybrid Coupler
2 to 18 GHz Hybrid Coupler Meets IP65 Standards

90 Degree Hybrid Coupler from VidaRF

The VHC-20180A is a hybrid coupler from VidaRF that operates from 2 to 18 GHz. It has an insertion loss of 0.9 dB, Isolation of 20 dB and VSWR of 1.2:1. The coupler can handle up to 30 watts of average power and 1 KW of peak power. It is available in a module with SMA connectors. It can be modified to meet IP65 Standards.
 
Download Datasheet | Product Details
 
Coaxial Termination
DC to 3 GHz Low PIM Termination with N Type Male Connector

Coaxial Termination from MECA

The LPT30-NM is a DC to 3 GHz low PIM Termination that can handle up to 30 W of average power and 2.5 kW Peak Power. The termination has a VSWR of 1.2:1 and is available with an N Type male connector. It measures 5.50 x 2.25 inches and weighs 1.13 lbs.
 
Download Datasheet | Product Details
 
Power Divider
10 Watt 4 Way Power Divider from 3 to 40 GHz

Power Divider from KRYTAR

The 7030400 from KRYTAR is a 4 way RF power divider that operates from 3 to 40 GHz. It can handle up to 10 W of power, has an insertion loss of less than 3.6 dB and an isolation over 13 dB. The divider has an input VSWR of 2.5:1 and output VSWR of 2:1. It is available as a module with 2.4 mm female connectors.
 
Download Datasheet | Product Details
 
RF Amplifier
400 to 2700 MHz 1 Watt High Efficiency Silicon Amplifier

RF Amplifier from NXP Semiconductors

The BGA6130 from NXP Semiconductors is a high efficiency silicon amplifier that operates from 400 to 2700 MHz. It provides an output power of 29.5 dBm at 3 dB gain compression with efficiency higher than 55%. The amplifier is matched to 50 Ohms and has a noise figure of 4.5 dB. It requires a supply of 3.6 V. The amplifier can be used in Broadband CPE / MoCA, Wireless Sensor Network (WSN), Satellite Master Antenna TV (SMATV) and Industrial applications.
 
Download Datasheet | Product Details
 
Digital Phase Shifter
8-Bit Digital Phase Shifter from 500 MHz to 2 GHz

Digital Phase Shifter from Planar Monolithics Industries

The PS-500M2G-8B-SFF is an 8-bit, digitally controlled phase shifter that operates from 500 MHz to 2 GHz. It has an insertion loss of 13 dB, a capability of phase shifting from 0° to 360° and a switching speed of 500 ns. The phase shifter requires a supply of 15 V and is available in a module with SMA Female connectors that measures 4.95" x 3.38" x 1.0".
 
Download Datasheet | Product Details
 
RF Amplifier
GaN Hybrid Power Amplifier from 2110 MHz to 2170 MHz

RF Amplifier from RFHIC

The HT2121-30A from RFHIC is a GaN hybrid power amplifier that operates from 2110 MHz to 2170 MHz. It provides an average output power of 37 dBm with a power gain from 35.5 dB to 38.5 dB. The amplifier requires a 28 V supply voltage and draws 650 mA of current. It is ideal for use in RF sub-systems, base stations, repeaters and LTE systems.
 
Download Datasheet | Product Details
 
Coaxial Isolator
225 to 400 MHz Coaxial Isolator Handles 100 Watt of Avg. Power

Coaxial Isolator from UIY Technology

The UIYBCI5377ASF from UIY Technology is a Coaxial Isolator that operates from 225 to 400 MHz. It has an isolation 18 dB max, insertion loss of 1.2 dB max, VSWR of 1.6:1 and can operate at a temperature from -40 to +85C. The Isolator can handle up to 100 W of power and is available with SMA Female connectors.
 
Download Datasheet | Product Details
 
Balun
300 kHz to 50 GHz 1:2 Balun Transformer

Balun from Marki Microwave

The BAL-0050 from Marki Microwave is a Balun that operates from 300 kHz to 50 GHz. It is an 1:2 transformer (50 ? unbalanced, 100 ? differential/50 ? balanced port). It has an amplitude balance from 0.7 to 1.4 dB and phase balance of 4 degrees with an insertion loss of under 6 dB. The balun is ideal for analog to digital converters, balanced receivers, baseband digital modulation and signal integrity applications. It is particularly suited to testing poorly matched or non 50 ? devices or for extending 2 port VNAs for differential testing.
 
Download Datasheet | Product Details
 
Voltage Controlled Oscillator
850 to 1050 MHz Low Phase Noise VCO

Voltage Controlled Oscillator from Z-COMM

The V590ME09-LF from Z-COMM is a VCO that operates from 850 to 1050 MHz. It has a tuning voltage range from 0.5 to 5 V DC and a low phase noise of -100 dBc/Hz @ 10 kHz offset. The VCO requires a 5 V DC supply and draws 16 mA of current. It is available in surface mount package and can be used in Microwave radio systems and in test equipment applications.
 
Download Datasheet | Product Details
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.