1. everything RF
  2. RF Newsletters
more
PREV 20 Sept, 2021 NEXT

Latest News & White Papers this Week

20 Sept, 2021 - everything RF Newsletter

Top stories this week. View it in your browser

 
Date: 20 Sept, 2021
 
Sponsored by PCB Directory
 
 
 
Latest News this Week
GlobalFoundries and Qualcomm to Develop Advanced 5G RF Front End Products - Qualcomm
Linwave Technology and Marki Microwave Collaborate to Develop Miniature Switched Filter Bank Solution - Linwave
Mercury Systems Successfully Demonstrates SOSA Aligned Sensor Processing Platform - Mercury Systems
IQD Updates its High Performance Rubidium Oscillator - IQD Frequency Products
Bluetest Integrates the R&S 5G Radio Communication Tester into its Reverberation Test Systems - Rohde & Schwarz
LitePoint Launches a New Test System for the Wi-Fi 7 Standard - LitePoint
Cadence and Samsung Accelerate 3nm Mixed-Signal Silicon - Cadence Design Systems
FreeWave Introduces a Purpose Built Low-Cost IIoT Solution Powered by Satellites - Swarm Technologies
Filtronic Delivers 60,000 Transmit/Receive Modules for a European Phased Array Radar System - Filtronic
Orolia Wins €65 Million Atomic Clock Contracts for Second Generation Galileo Satellites - Orolia
More News
New White Papers & Articles
ESD Testing Simulation: A Closer Look at TVS Diodes for ESD Protection - Remcom
Optimizing VNA Measurement Speed - Copper Mountain Technologies
Massive MIMO - Eight things to consider when testing antenna arrays - Rohde & Schwarz
RF/Microwave Technology Driving the Connected Car - Cadence Design Systems
Top 10 Questions Engineers Ask About Software Defined Radios - Software Defined Radios
More White Papers
Upcoming Event
Event Image
PCB WEST 2021
Date: 5 to 8 October, 2021
Location: Santa Clara Convention Center, CA, USA
More Events
Featured Products this Week
Limiter
100 W MMIC Power Limiter from 10 MHz to 6 GHz

Limiter  from Teledyne e2v HiRel Electronics

The TDLM06100 from Teledyne e2v HiRel Electronics is an RF Power Limiter that operates from 10 MHz to 6 GHz. It can handle up to 50 dBm of pulsed input power, has a P1dB of up to 13 dB and leakage power of less than 16.8 dBm. The limiter has an insertion loss of less than 1.2 dB, a response time of 0.6 ns, and a recovery time of 1 ns.
Download Datasheet | Product Details
RF Amplifier
4000 W Pulsed Solid State Power Amplifier for X-Band Radars

RF Amplifier  from Comtech PST

The BHCDP938988-4000 from Comtech PST is a GaN solid-state power amplifier that operates from 9.3 to 9.8 GHz in the X-band. This Class AB amplifier delivers pulsed peak output power of up to 4000 W with a gain of 66 dB and requires a 50 VDC supply. It is available in a module that measures 12.5 x 13 x 9 inches with a TNC (F) connector at the input and a WR-90 interface at the output with an Ethernet (RJ-45) control interface.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Vector Network Analyzer, 100 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C1209 is a Vector Network Analyzer that operates from 100 kHz to 9 GHz. It has a dynamic range of 148 dB and can be operated with any Windows PC or laptop. The VNA has a measurement speed of 10 microseconds and can measure up to 500,001 points. It has a wide output power range from -60 dBm to 15 dBm. The C1209 takes up about half a rack (in width) measuring 14.8 x 8.3 x 3.7 inches and weighs 10.5 lbs. (4.8 kg).
Download Datasheet | Product Details
Front End Module
2.4 GHz 2 x 2 MIMO Wi-Fi 6 Front-end Module

Front End Module  from NXP Semiconductors

The WLAN8101H from NXP Semiconductors is a 2.4 GHz 2 x 2 MIMO Wi-Fi 6 Front-end Module. It includes two monolithic front-end ICs, each having an integrated transmit power amplifier with directional coupler, a low-noise receive amplifier and a transmit/receive switch for the Bluetooth channel. The FEM also includes coexistence filters for both transmit and receive channels.
Download Datasheet | Product Details
RF Module
LoRa® Baseband Processor for Gateways

RF Module  from Semtech

The SX1303 from Semtech is a LoRa Baseband Processor Chip that has been developed for gateways. It has been designed to cut down current consumption, simplify thermal design, lower the Bill Of Materials cost and reduce the overall size of gateways. It has an Rx sensitivity of up to -141 dBm with the SX1250 Tx/Rx Front end. The chip supports 8 x 8 channels LoRa packet detectors, 8 x SF5-SF12 LoRa demodulators, and 8 x SF5-SF10 LoRa demodulators.
Download Datasheet | Product Details
RF Amplifier
60 W Solid-State Amplifier from 0.7 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 60S1G6 from AR RF/Microwave Instrumentation is a portable, self-contained, air-cooled, solid-state microwave amplifier that operates from 0.7 to 6 GHz. It delivers over 60 watts of CW output power and has a gain of more than 48 dB with a noise figure of 10 dB. The low level of spurious signals and linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems.
Download Datasheet | Product Details
RF Amplifier
200 W Solid State Pulsed Power Amplifier for X-band Applications

RF Amplifier  from Diamond Microwave

The DM-X200-02 from Diamond Microwave is an X-band GaN pulsed solid-state power amplifier that operates from 8.2 to 9.5 GHz. It delivers an output power of 200 Watt. The PA has a pulse width of up to 100 µs with duty cycles up to 15 %. It is available in a module that measures 220 x 150 x 41 mm with SMA and N-type female connectors and is ideal for use in demanding defense, aerospace and communications applications.
Download Datasheet | Product Details
Termination
0.5 W, 2.4 mm-Male Termination from DC to 50 GHz

Termination  from MECA

The 469-1 from MECA is a 2.4 mm-Male, 50 ohm termination that operates from DC to 50 GHz. The termination can handle up to 0.5 watts of average power and has a VSWR of 1.60:1.
Download Datasheet | Product Details
Waveguide Switch
3000 W X-Band SPDT Switch from 9.2 to 9.8 GHz

Waveguide Switch  from Communications & Power Industries

The BLP2084 from CPI is an X-band SPDT Switch that operates from 9.2 to 9.8 GHz. It has an insertion loss of less than 1 dB and provides isolation of 40 dB. The switch can handle peak powers of up to 3000 W and has a VSWR of less than 1.5:1. It has a switching speed of up to 30 µSec with a switching rate of 3 kHz and has a pulse width of 40 µSec.
Download Datasheet | Product Details
Signal Generator
Thumb Drive Sized RF Signal Generator from 12.5 MHz to 6.4 GHz

Signal Generator  from Windfreak Technologies

The SynthUSB3 from Windfreak Technologies is a thumb drive sized RF Signal Generator that operates from 12.5 MHz to 6.4 GHz. It provides an output power of up to 8 dBm with an amplitude resolution of 0.2 dB. This USB powered generator has a phase noise of -115 dBc/Hz at 1 GHz@10 kHz offset and supports FM, AM, and pulse modulation techniques.
Download Datasheet | Product Details
Waveguide Isolator
Waveguide Ferrite Junction Isolator from 47 to 52 GHz

Waveguide Isolator  from HXI

The HMI19-383-49.5-5.0 from HXI is a Waveguide Ferrite Junction Isolator that operates from 47 to 52 GHz. It can handle an input power of more than 1.5 W, provides over 18 dB of isolation, and has an insertion loss of less than 0.5 dB. The insertion loss and VSWR performance of this isolator are better than the Faraday isolators. It is available in a module that measures 1.13 x 1.41 x 1.17 inches with WR-19 and UG-383-U-M/UG-599/U-M interfaces.
Download Datasheet | Product Details
RF Switch
High Linearity Automotive e-Call Antenna Routing Switch

RF Switch  from Qorvo

The QPC1251Q from Qorvo is an Automotive Antenna Routing Switch that is designed to enable Emergency Calling (e-Call) functionality in the Telematics Control Units (TCU). It provides excellent insertion loss and isolation. This highly linear switch can handle up to +34 dBm of CW power and has a switching speed of 2 µs. It is available in a 32-pin surface-mount package that measures 4.00 x 6.00 X 0.65 mm.
Download Datasheet | Product Details
RF Amplifier
Power Amplifier Modules for Quad-Band GSM / GPRS / EDGE / TD-SCDMA / TDD LTE / HD-FDD LTE

RF Amplifier  from Skyworks Solutions

The SKY77368-11 is a high linearity power amplifier module from Skyworks designed for LTE M/NB-IoT modules supporting fixed gain (GMSK), fixed gain linear (EDGE) modulation in the GSM850/900 and DCS1800/PCS1900 bands, and TD-SCDMA modulation in Bands 34 and 39 along with Class12 GPRS multi-slot operation. It is available in a surface-mount package that measures 3.0 x 3.0 x 0.67 mm.
Download Datasheet | Product Details
RF Variable Attenuator
60 dB 6-Bit PIN Diode Attenuator from 0.2 to 18 GHz

RF Variable Attenuator  from KRATOS General Microwave

The Model 3250B from Kratos is a PIN Diode Attenuator that operates from 0.2 to 18 GHz. It provides an attenuation of up to 60 dB in 1 dB increments using 6-bit binary or BCD programming with an accuracy of ± 1.5 dB. The attenuator can handle a peak input power of 2 W, has an insertion loss of less than 5 dB, and switching time of less than 2 µsec.
Download Datasheet | Product Details
RF Spectrum Recording and Playback System
Portable Monitoring Receiver and RF Recorder from 9 kHz to 18 GHz

RF Spectrum Recording and Playback System  from IZT

The R3301 from IZT is a Portable Receiver that operates from 9 kHz to 3 GHz with an integrated RF recorder. The receiver has been optimized for the recording of RF signals in frequently changing environments. It has a built-in sensor controller for running software applications and storing signal data and is optimized for recording RF signals in mobile and portable applications.
Download Datasheet | Product Details
Sponsored by EMC Directory
 
 
 
Microwave Absorber
High Power Pyramidal Absorbers from 80 MHz to 50 GHz

Microwave Absorber  from Microwave Vision Group

The HPX Series from MVG World are High Power Absorbers that can be used from 80 MHz to 50 GHz. They have a pyramidal shape, can withstand temperatures of up to 176°C and the hollow honeycomb structure allows for quick heat dissipation. The absorbers can handle up to 15 kW/m2 without air circulation and it can be increased with circulation.
Download Datasheet | Product Details
Microwave Backhaul Radio Links
2.6 Gbps E-Band Microwave Backhaul Radio from 71-76 and 81-86 GHz

Microwave Backhaul Radio Links  from Star Microwave Service Corporation

The SMC-80G2500EL-1FT from Star Microwave is an E-Band Microwave Backhaul Radio from 71-76 GHz and 81-86 GHz. It has a channel bandwidth of 250 MHz and 500 MHz and supports QPSK/16-QAM/32-QAM/64-QAM/128-QAM/256-QAM hitless ACM (Adaptive Coding and Modulation) modulation schemes. It requires a DC power supply of -48 V and transmits up to +20 dBm of power.
Download Datasheet | Product Details
Waveguide Switch
SP4T Reflective PIN Diode Switch from 56 to 64 GHz

Waveguide Switch  from Ducommun

The CP4-60086030-02 from Ducommun is an SP4T Reflective PIN Diode Switch that operates at V-band frequencies from 56 to 64 GHz. It has a switching speed of less than 200 ns and a TTL-compatible driver that is activated by a TTL signal applied to the control connector. The switch can handle a CW RF power of 23 dBm, has an insertion loss of less than 6 dB, and provides more than 30 dB of isolation.
Download Datasheet | Product Details
Waveguide Coupler
4-Way Broadwall Directional Couplers from 18.3 to 31 GHz

Waveguide Coupler  from L3Harris Narda-ATM

The 310 Series from L3Harris are 4-Way Broadwall Multi-Hole Directional Waveguide Couplers that operate from 18.3 to 31 GHz. They have coupling factors of 3, 6, 10, 20, and 30 dB with a directivity of 40 dB. These pressure-sealed couplers have a VSWR of less than 1.40:1. They are fabricated using aluminum/copper-brass material and are available with coaxial connectors at the input and waveguide interface at the output.
Download Datasheet | Product Details
Power Divider
2-Way Power Divider from 6 to 18 GHz

Power Divider  from P1dB Inc.

The P1PD-SAF-0618G30W-2 from P1dB Inc. is a 2-Way Power Divider that operates from 6 to 18 GHz. It can handle an input power of 30 W, has an insertion loss of 0.6 dB, and provides 20 dB of isolation. This 50-ohm power divider is RoHS compliant and available in a module with SMA-female connectors.
Download Datasheet | Product Details
Antenna
IP67-Rated Antennas from 600 MHz to 6 GHz for Critical Communications

Antenna  from Parsec Technologies, Inc.

The K9 Pro Series from Parsec Technologies are Antennas that operate from 600 MHz to 6 GHz for critical communication applications. They support 4x4 MIMO LTE, 4x4 MIMO Wi-Fi, CBRS, LTE LAA, and GPS/GNSS. These linear or right hand circularly polarized antennas provide a peak gain of 9 dBi and have a radiated efficiency of more than 60%.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]