PREV 7 Oct, 2021 NEXT

Latest GNSS News & White Papers

7 Oct, 2021 Newsletter - everything RF

GNSS news and products. View it in your browser

 
GNSS Update
Date: 7 Oct, 2021
 
Keep up to date with GNSS Developments
 
 
Latest GPS/GNSS News
News
Spirent Federal Launches an Industry-First Alternative RF Navigation Simulator

Spirent Federal Systems

News
Broadcom Introduces Low Power L1/L5 GNSS Receiver for Mobile and Wearable Applications

Broadcom

News
Orolia Wins €65 Million Atomic Clock Contracts for Second Generation Galileo Satellites

Orolia

News
Spirent Develops Galileo Open Service Navigation Message Authentication Simulation Tool

Spirent Communications

News
u-blox Urges FCC to Reconsider Use of Previously Protected L-Band Frequencies to Avoid GNSS Interference

u-blox AG

News
Keysight and Orolia Collaborate to Enable 5G Location-Based Services Using GNSS Technologies

Keysight Technologies

New Category
GNSS OEM Boards
GNSS OEM Boards on everything RF
everything RF has listed GNSS OEM Boards from the leading manufacturers in place. You no longer need to look at multiple manufacturer websites to find GNSS OEM Boards. You can see them all in one place. View GNSS OEM Boards.
New GPS/GNSS Products
GNSS System on Chip
Low-Power L1, L5 Band GNSS Receiver for Mobile Applications
GNSS System on Chip  from Broadcom
The BCM4778 from Broadcom is an L1, L5 Band GNSS Receiver that is designed for mobile and wearable applications. It uses Broadcom’s proprietary Grid Tracking technology that simultaneously tracks line-of-sight and multiple reflections from each satellite to enhance urban accuracy. The receiver is based on 7 nm CMOS technology and has an ultra-low power consumption.
Download Datasheet | Product Details
GNSS Module
Multi-Constellation GNSS Module with Inertial Measurement Technology
GNSS Module  from u-blox AG
The ZED-F9R from u-Blox is a Multi-Band GNSS Module that supports GPS/QZSS, GLONASS, Galileo and BeiDou constellations. It has an integrated inertial measurement unit (IMU) for RTK positioning which uses built-in algorithms to fuse the IMU data, GNSS measurements, wheel ticks, correction data, and vehicle dynamic models to provide optimal positioning accuracy.
Download Datasheet | Product Details
GNSS Module
GNSS Module for Responsive Navigation and Difficult Conditions
GNSS Module  from Wurth Elektronik
The Erinome-II from Würth Elektronik is a GNSS Module that supports four major GNSS constellations (GPS, GLONASS, Galileo, and BeiDou) for fast and accurate positioning. The connection of an external antenna can be made through an RF pad for module operation. This module is based on Qualcomm SirfStar V 5e chipset and features standard NMEA + chipset-specific communication protocols.
Download Datasheet | Product Details
GNSS OEM Board
Multi-Constellation GNSS/INS OEM Receiver
GNSS OEM Board  from Septentrio
The AsteRx-i3 D Pro from Septentrio is a Multi-Constellation GNSS/INS OEM Receiver that supports simultaneous tracking of GPS, GLONASS, BeiDou, Galileo, SBAS, EGNOS, WAAS, GAGAN, MSAS, and SDCM signals. It has a cold start time of less than 45 s, a warm start of less than 20 s, and an average re-acquisition time of 1s.
Download Datasheet | Product Details
GNSS Module
12-Channel L1/L2 Band GPS Receiver Module for Military Applications
GNSS Module  from BAE Systems
The Micro GPS Receiver Application Module (MicroGRAM) from BAE Systems delivers geolocation and precise positioning capabilities for military applications such as tactical communications, field computers, and unmanned aircraft. The module is capable of 12-channel continuous satellite tracking and supports L1 and L2 dual-frequency GPS signal reception.
Download Datasheet | Product Details
GNSS Anti-Jamming Solution
GNSS Anti-Jamming CRPA System
GNSS Anti-Jamming Solution  from TUALCOM
The TUALAJ 8300 from Tualcom is a GNSS Anti-Jamming CRPA solution with an embedded receiver that provides jam free GNSS signals for critical missions. It eliminates interference by applying a novel beamforming technique. With an 8-array Controlled Reception Pattern Antenna (CRPA) antenna, the system can ensure normal operation of GNSS receiver in presence of multiple jamming sources.
Download Datasheet | Product Details
GNSS Simulator
Software-Defined GNSS Simulator for Space Trajectories and PNT Applications
GNSS Simulator  from Orolia
The GSG-8 from Orolia is a Software-Defined GNSS Simulator that delivers the highest standard of Global Navigation Satellite System (GNSS) signal testing and sensor simulation performance in an easy-to-use, upgradable and scalable platform. This software-powered turnkey simulator supports multi-constellation, multi-frequency, and hundreds of signals with a 1000 Hz iteration rate.
Download Datasheet | Product Details
GPS/GNSS Antenna
Microstrip GNSS Antenna from 1595 to 1610 MHz for Embedded Applications
GPS/GNSS Antenna  from Maxtena
The MPA-134-GPS from Maxtena is a Microstrip GNSS Antenna that operates at GPS and GLONASS frequencies from 1595 to 1610 MHz. This RHCP antenna provides a gain of -1.5 dBic at Zenith and has a VSWR of less than 2:1. It utilizes a special semi ceramic-based material which leads to higher upper hemisphere efficiency and a lower axial ratio (5 dBi) as compared to regular patch antennas.
Download Datasheet | Product Details
Featured Category
GNSS Anti-Jamming Solutions
GNSS Anti-Jamming Solutions on everything RF
GNSS Anti Jamming Solutions from the leading manufacturers are listed on everything RF. Narrow down on GNSS Anti Jam Solutions solutions based on the configuration, frequency band, number of antenna elements, and other parameters. Click here to find a Anti-Jamming GNSS Solutions.
GPS/GNSS Antenna
Active/Passive Multiband GNSS Antenna Mountable on Metal Surface
GPS/GNSS Antenna  from Arralis
The M-GNSSA-ANT-LNA from Arralis is a Multiband GNSS Antenna that operates in the GPS L5, L2, L1, Galileo E1, E5a, and GLONASS G1, G2 bands. It supports active and passive operation with an optional integrated LNA for an active operation which provides a gain of 15 dB across the bands. The multi-band operation provides reliable operation by allowing an optimal channel to be utilized with built-in redundancy in case of signal drop-off.
Download Datasheet | Product Details
Front End Module
RF Front End Module for GPS Applications
Front End Module  from NuWaves Engineering
The NW-RF-GPS-FE from NuWaves is an RF Front End Module for GPS applications with a transmit (Tx) frequency from 1626.5 to 1675 MHz and a receive (Rx) frequency from 1518 to 1559 MHz. It delivers more than 20 W of saturated output power with a transmit gain of 43 dB and a receive gain of 47 dB. The module can handle up to 12 dBm of input power and operates on 27-32 VDC supply while consuming 3.25 A (typical) of current.
Download Datasheet | Product Details
Trending GPS/GNSS White Papers & Articles
Creating a GNSS Test Plan: A Start to Finish Guide - Orolia
Simplify Coexistence and Interference Testing for GNSS Receivers - Rohde & Schwarz
Understanding GNSS Sensitivity - everything RF
What is Dual-band GNSS? - everything RF
What is the M-Code? - everything RF
More Whitepapers
The Largest Database of GNSS Modules
GNSS Modules
GNSS Modules on everything RF
GNSS Modules from the leading manufacturers are listed on everything RF. Find modules based on the constellations supported, sensitivity, frequency band, and various other parameters. Click here to find a GNSS Module.
Upcoming Event
Event Image
Navigation 2021
Date: 15 to 18 November 2021
Location: Virtual / Digital Format
More Events
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]