1. everything RF
  2. RF Newsletters
more
PREV 13 Oct, 2021 NEXT

New RF and Microwave Products this Week

13 Oct, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 13 Oct, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
Phase Noise Analyzer
Phase Noise Analyzer & VCO Tester from 1 MHz to 8/26.5 GHz

Phase Noise Analyzer  from Rohde & Schwarz

The R&S FSPN from Rohde & Schwarz is a Phase Noise Analyzer and VCO tester that operates from 1 MHz to 8/26.5 GHz. It is designed to provide both very high sensitivity and measurement speeds for production and design engineers who need to characterize sources such as synthesizers, VCOs, OCXOs, and DROs. It can conduct transient response analysis up to 8 GHz for frequency and phase measurements in the time domain.
Download Datasheet | Product Details
Tunable Filter
Digitally Tunable Bandpass Filter from 2.5 to 7.5 GHz

Tunable Filter  from Otava, Inc

The OTFL101 from Otava is a Digitally Tunable Bandpass Filter with a frequency tuning range from 2.5 to 7.5 GHz. It has an insertion loss of 7 dB and an instantaneous bandwidth of 1 GHz. The filter is based on SOI technology and is a single-chip replacement for discrete filter banks. It requires a DC supply of 1.8/2.5 V and consumes less than 10 uA of current.
Download Datasheet | Product Details
Band Pass Filter
Bandpass Filter with Passband from 9998 to 10002 MHz

Band Pass Filter  from Wainwright Instruments

The WBWP5-9976-9998-10002-10024-50SS from Wainwright Instruments is a Bandpass Filter with a passband from 9998 to 10002 MHz and a center frequency at 10 GHz. It can handle an input power of up to 100 W and has an insertion loss of less than 4 dB. The filter provides more than 50 dB of attenuation in the stopband from DC to 9976 MHz and 10024 to 16000 MHz.
Download Datasheet | Product Details
RF Amplifier
5 GHz GaN on SiC General-Purpose Amplifier for LTE/5G Applications

RF Amplifier  from Wolfspeed

The WSGPA01 from Wolfspeed is a Discrete General-Purpose Amplifier (GPA) that operates from DC to 5 GHz. It provides a small signal gain of 16.3 dB with a drain efficiency of 18.2% and P3dB of 10 W. The amplifier requires a 48 V supply voltage and draws 25 mA of current. It is based on a GaN on SiC High Electron Mobility Transistor (HEMT) technology.
Download Datasheet | Product Details
RF Amplifier
30 W GaN Hybrid Power Amplifier from 2.4 to 2.5 GHz

RF Amplifier  from RFHIC

The RIH25030-20 from RFHIC is a GaN on SiC Hybrid Power Amplifier that operates from 2400 to 2500 MHz. It delivers an output power of 30 W (44.77 dBm) with a gain of 15.5 dB and has a drain efficiency of 70%. The amplifier requires a drain voltage of 45 V and is input/output matched to 50 ohms. It is available in an SMD package that measures 13 x 17 x 2.9 mm with copper-clad lamination.
Download Datasheet | Product Details
Tower Mount Amplifier
Tower Mounted Amplifier System with Receive Multicoupler Unit

Tower Mount Amplifier  from Filtronic

The SGG0xx-P_MU from Filtronic is a Tower Mounted Amplifier System with a Multicoupler Unit. It has a passband from 794 to 824 MHz, provides a gain of more than 23 dB, and has a noise figure of less than 2.8 dB. The system provides up to 15 dB of attenuation in 0.5 dB steps. It has Tx band rejection of more than 110 dB to eliminate TX intermodulation blocking issues.
Download Datasheet | Product Details
Sponsored by Mouser
ADL9005
Wideband GaAs, MMIC, and pHEMT RF amplifier
Analog Devices ADL9005 Wideband Low-Noise Amplifier is a Gallium Arsenide, Monolithic Microwave-Integrated Circuit, and pseudomorphic High-Electron Mobility Transistor RF amplifier that operates within 0.01GHz to 26.5GHz frequency range and provides a typical gain of 17.5dB from 0.01GHz to 14GHz. Click here to learn more.
 
Band Pass Filter
mmWave Bandpass Filter with Passband from 81 to 89 GHz

Band Pass Filter  from Cubic Nuvotronics, Inc.

The PSF85B08W from Cubic Nuvotronics is a Millimeter-Wave Bandpass Filter with a passband from 81 to 89 GHz. It can handle an input power of 2 W (CW) and has an insertion loss of less than 3.6 dB. The filter provides more than 35 dB rejection above and below the passband and the steep filtering skirts allow for optimal utilization of the frequency band.
Download Datasheet | Product Details
RF & Microwave Circulator
Cryogenic Triple Junction Circulator from 8 to 12 GHz

RF & Microwave Circulator  from Low Noise Factory

The LNF-CICICIC8_12A from Low Noise Factory is a Cryogenic Triple Junction Circulator that operates from 8 to 12 GHz. It has an insertion loss of 0.3 dB (at 4K) and provides 60 dB of isolation. The circulator has been designed from the ground up to meet the strict requirements of ultra-low temperature physics research. It is available in a slim module that measures 57.2 x 20.6 x 10.2 mm with SMA connectors.
Download Datasheet | Product Details
GNSS System on Chip
Low-Power L1, L5 Band GNSS Receiver for Mobile Applications

GNSS System on Chip  from Broadcom

The BCM4778 from Broadcom is an L1, L5 Band GNSS Receiver that is designed for mobile and wearable applications. It uses Broadcom’s proprietary Grid Tracking technology that simultaneously tracks line-of-sight and multiple reflections from each satellite to enhance urban accuracy. The receiver is based on 7 nm CMOS technology and has an ultra-low power consumption.
Download Datasheet | Product Details
Directional Coupler
20 dB Coupler with Active Monitoring System from 130 to 960 MHz

Directional Coupler  from Microlab

The Smart Coupler from Microlab is a combination of a Passive Coupler and an active monitoring system that operates from 130 to 960 MHz. It can handle an input power of 50 W and provides a coupling from 6 to 20 dB with 17 dB directivity. The smart coupler can monitor DAS infrastructure health, including antennas, coaxial cables, and other passive components.
Download Datasheet | Product Details
Horn Antenna
Microwave Horn Antenna from 0.8 to 6 GHz for EMC Testing

Horn Antenna  from AR RF/Microwave Instrumentation

The ATH800M6G from AR RF/Microwave Instrumentation is a Microwave Horn Antenna that operates from 0.8 to 6 GHz. With a minimum gain of 11 dBi, the antenna supplies the high-intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. The antenna features specially designed septums that are installed to focus the energy, ensuring the intensity of the field for 3-meter testing. It provides the lower frequency microwave response required for many often used test specifications.
Download Datasheet | Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 85 MHz to 14 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The R140 VNA is a 1-port USB powered VNA that operates from 85 MHz to 14 GHz. The VNA is the size of a deck of cards and can be controlled by any Windows PC or laptop. The R140 provides a wide variety of analysis capabilities, including time-domain with gating and DTF measurements at no additional cost. Collection of metrology-grade S-parameter test results can be achieved manually or though automation in Python, MATLAB, Excel, C++, VB.NET, or LabVIEW.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-1160 from RF Electronics is a RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. The test box has a thick RF absorbing foam that provides an isolation of more than 90 dB. It has shielded power filters for powering devices placed inside the box while blocking all wireless signals. The HDRF-1160 has a number of I/O connector options that include HDMI, RJ45, USB, DB9, VGA, DB25 and AC/DC.
Download Datasheet | Product Details
Fixed Attenuator
AlN-Based Thick Film, Surface Mount RF Attenuators from DC to 10 GHz

Fixed Attenuator  from International Manufacturing Services

The V Series from International Manufacturing Services are Aluminum Nitride (AlN) based surface mount thick film attenuators that operate up to 10 GHz. They are available in attenuation configurations from 0 to 30 dB with an accuracy of ± 0.9 dB. These attenuators have a standard impedance of 50 Ohms and an operating temperature range from -55 to 150 °C.
Download Datasheet | Product Details
Power Divider
30 W, 4-Way Power Divider from 26 to 34 GHz

Power Divider  from MECA

The 804-3-30.000 from MECA is a 4-way power divider that operates from 26 to 34 GHz. It can handle up to 30 watts of power, has an insertion loss of under 2.2 dB and isolation over 15 dB. The power divider is available in a module with 2.92mm Female connectors.
Download Datasheet | Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer from 6 to 20 GHz

RF Spectrum Analyzer  from SAF Tehnika

The J0SSAP52 from SAF is a Compact Spectrum Analyzer that operates from 6 to 20 GHz. It supports continuous and manual sweep functions and has a real-time bandwidth of up to 1 MHz. The analyzer has a frequency resolution of 30 kHz and an amplitude accuracy of ±1 dBm. Standard measurements of this analyzer include channel power, adjacent channel power, signal bandwidth, center frequency, interference detection, and mask.
Download Datasheet | Product Details
RF Switch
6-Channel SPST Micro-Mechanical Switch from DC to 3 GHz

RF Switch  from Menlo Micro

The MM3100 from Menlo Micro is a Six-Channel, Normally Open (NO), Single Pole Single Throw (SPST) Micro-Mechanical Switch that operates from DC to 3 GHz. It is based on Menlo’s Ideal Switch technology and is capable of 25 W power transfer. Each channel provides an ultra-low on-state insertion loss of 0.3 dB and high off-state isolation of 25 dB.
Download Datasheet | Product Details
Switched Filter Bank
Four-Channel Switch Filter Bank from 2 to 6 GHz

Switched Filter Bank  from Planar Monolithics Industries

The 4SFB-2G6G-CD-5-N12-SFF from Planar Monolithics Industries is a Four-Channel Switch Filter Bank that operates from 2 to 6 GHz. It has four filter channels centered at 2.5 GHz, 3.5 GHz, 4.5 GHz, and 5.5 GHz respectively. Each channel offers a bandwidth of 1 GHz. The filter bank has an insertion loss of less than 5 dB and provides -60 dBc of rejection @ 15% of the corner frequencies.
Download Datasheet | Product Details
RF Amplifier
Ultra-Low Noise Amplifier from 1 to 6 GHz for Automotive Applications

RF Amplifier  from Guerrilla RF

The GRF2074W from Guerrila RF is an Ultra-Low Noise Amplifier that operates from 1 to 6 GHz. It provides 20.5 dB of gain with a noise figure of less than 0.4 dB and has a P1dB of 17.5 dBm. The LNA requires a DC supply of 5 V and consumes less than 75 mA of current. This AEC-Q100 Grade 2 qualified LNA is fabricated using a GaAs pHEMT process and offers flexible bias voltage and current.
Download Datasheet | Product Details
Wireless Charging Transmitter
15 W Qi Compatible Automotive In-Cabin Wireless Charging Transmitter

Wireless Charging Transmitter  from Spark Connected

The Beast 2.0 from Spark Connected is an Automotive In-cabin Wireless Charger that meets Qi v1.3 requirements. It utilizes TDK’s latest pattern coil technology and delivers up to 15 W of power. The charger provides class-leading EMC performance, a wide input supply range with continuous charging even during vehicle stop/start events, and Foreign Object Detection (FOD).
Download Datasheet | Product Details
Power Divider
2-Way Surface-Mount Power Divider from 2.9 to 6.2 GHz

Power Divider  from Electro-Photonics LLC

The EP2D-4550-LTCC-001 from Electro-Photonics is a 2-Way Power Divider that operates from 2.9 to 6.2 GHz. It can handle an input power of 1.5 W and provides 22 dB of isolation. This power divider has an amplitude balance of ± 0.3 dB and a phase balance of ± 9°. It is available in a RoHS compliant surface-mount package that measures 3.00 × 3.00 × 0.89 mm.
Download Datasheet | Product Details
Signal Generator
RF Signal Source from 8-12 and 30-36 GHz with Four Modes of Frequency Modulation

Signal Generator  from dB Control

The dB-9003 from dB Control is a custom-mounted Integrated Stabilized RF Source (ISRFS) that operates from 8 to 12 GHz and from 30 to 36 GHz. This highly accurate RF source has switching speeds of 1 uS to be within ± 1 MHz accuracy and supports four modes of frequency modulation. It provides an output power up of 17 dBm with 8-Bit amplitude control (0.125 dB LSB) across a dynamic range of 50 dB.
Download Datasheet | Product Details
Block Up Converter
X-Band BUC from 7.9 to 8.4 GHz for Military SATCOM Systems

Block Up Converter  from ACORDE

The ACMB-X20W-E1-V3 from Acorde Technologies is a Block Up Converter (BUC) that converts an input frequency from 950 – 1450 MHz to an output frequency of 7.9 – 8.4 GHz. It provides over 60 dB of gain and has an output P1dB of more than 20 W. The BUC has an attenuation range of 30 dB with a 0.5 dB step size. It has a phase noise of -88 dBc/Hz at 10 kHz offset, spurious levels of less than -60 dBc, and harmonics of better than -50 dBc.
Download Datasheet | Product Details
Antenna
IP67-Rated 2.4/5 GHz Dual-Band External Wi-Fi Antenna

Antenna  from AVX Corporation

The X9001748 from AVX is a Wi-Fi (802.11a/b/g/n/ac/ax) Dual Band External Antenna that operates from 2400 to 2485 MHz and 5150 to 5850 MHz. This linearly polarized antenna provides a peak gain of 3.6 dBi and has an efficiency up to 71%. It is available in a dustproof and waterproof IP67-rated form factor that measures 180.00 x 12.98 mm and has RP-SMA connectors.
Download Datasheet | Product Details
Between Series RF Adapter
90 GHz 1.35 mm Plug (M) to 1.0 mm Jack (F) Adapter

Between Series RF Adapter  from Southwest Microwave

The 222430-00SF from Southwest Microwave is an RF coaxial adapter that operates from DC to 90 GHz. This 1.35 mm plug (male) to 1 mm jack (female) adapter has a low insertion loss, leakage of less than -100 dB, and VSWR of less than 1.28:1. It has a passivated stainless-steel housing with gold plated BeCu contacts.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]