1. everything RF
  2. RF Newsletters
more
PREV 20 Oct, 2021 NEXT

New RF and Microwave Products this Week

20 Oct, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 20 Oct, 2021
 
Sponsored by Warrior RF
 
 
 
New Products this Week
RF Amplifier
125 W GaN Power Amplifier from 3.1 to 3.5 GHz for Radar Systems

RF Amplifier  from Qorvo

The QPA2513 from Qorvo is a 2-Stage S-Band GaN Power Amplifier that operates from 3.1 to 3.5 GHz. It delivers a saturated power of 125 W (~ 51 dBm) with a large signal gain of 30 dB and has a power-added efficiency of 62%. The amplifier is matched to 50 Ohms, has integrated bias circuits and a DC blocking capacitor at the input port. It provides good thermal properties and is ideal for use in both commercial and military radar systems.
Download Datasheet | Product Details
Front End Module
Dual-Channel FEM from 2.3 to 2.8 GHz for TDD Receivers

Front End Module  from Analog Devices

The ADRF5519 from Analog Devices is a Dual-Channel Receiver Front End Module (FEM) that operates from 2.3 to 2.8 GHz. It is an integrated RF multichip module with a two-stage LNA and high-power SPDT switch on each channel. The FEM is designed for time division duplexing (TDD) in communication receivers. It is available in a 40-lead LFCSP package that measures 6 x 6 mm.
Download Datasheet | Product Details
RF Connector
Rugged Multi-Port Connector System for Fixed/Rotary Winged Airframes

RF Connector  from MegaPhase

The Mega8 from MegaPhase is a Multi-Port RF Connector System that can be used in both fixed and rotary winged airframes. These RF interconnects have spring-loaded interfaces to ensure positive mating under extreme vibration conditions. They consist of individually sealed connector housings and cable assemblies.
Download Datasheet | Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer

Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. It is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
Download Datasheet | Product Details
RF Transistor
200 W GaN Power Transistor from 2.7 to 2.9 GHz

RF Transistor  from Integra Technologies, Inc.

The IGN2729M200 from Integra is an RF Power Transistor that operates from 2.7 to 2.9 GHz. It delivers 200 W of peak output power with a gain of more than 17 dB and has an efficiency of up to 70%. The transistor utilizes GaN-on-SiC HEMT technology, has a pulse width of 100 µs and a duty factor of 10%. It requires a DC supply of 50 V and has pre-matched input impedance.
Download Datasheet | Product Details
Horn Antenna
High-Power Microwave Horn Antenna from 7.5 to 18 GHz

Horn Antenna  from AR RF/Microwave Instrumentation

The ATH7G18A from AR RF/Microwave Instrumentation is a Microwave Horn Antenna that operates from 7.5 to 18 GHz. It can handle an input power of 2800 W, provides a gain of 20 dBi and has a VSWR of 1.5:1. The antenna supplies the constant high intensity fields necessary for RFI/EMI field testing. It has a compact and lightweight design but is tough enough for outdoor use.
Download Datasheet | Product Details
Sponsored by Warrior RF
RF Synthesizer
Ultrafast RF Synthesizer with 0.2ns Switching
Yellow Jacket is the world's fastest 1U signal source covering 10MHz to 2.4GHz with a clean switching speed of 0.2ns and parallel port command rate of 8ns between any two frequencies. RF output power is 10 dBm with excellent phase noise and 0.1Hz resolution. Click here to learn more.
 
RF Amplifier
120 W Solid-State Power Amplifier from 6 to 12 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP3085A from Exodus Advanced Communication is a Solid-State Power Amplifier that operates from 6 to 12 GHz. This class AB amplifier provides a saturated output power of 120 W with a gain of over 50 dB. It is fabricated using an advanced solid-state linear hybrid design and is suitable for all single channel modulation standards. The amplifier has harmonics of -25 dBc and spurious levels under -60 dBc.
Download Datasheet | Product Details
RFID Tag
RAIN RFID Tag for Use on Metal Surfaces

RFID Tag  from SAG

The Overmolded Brick Mini Metal Tag from SAG is a RAIN RFID Tag that is optimized for use on metal surfaces. It is based on the NXP UCode 8 IC and has a read range of up to 10 m. This IP68 rated RAIN RFID tag measures 50.0 x 25.0 x 6.0 mm and has an adhesive attachment process. It can fit into a small space while providing superior reading performance compared to other tags of similar size.
Download Datasheet | Product Details
RF Inductor
Low Profile Wire-wound Ferrite Chip Inductors from 20 to 560 nH

RF Inductor  from Coilcraft

The 0402FL Series from Coilcraft are Wire-wound Ferrite Chip Inductors with inductance values from 20 to 560 nH. These chip inductors have a low profile of 0.55 mm, which is 10% lower than competitive inductors. They were developed for cellular applications for use either as filter elements, as one-pole filters, or as RF chokes in the cellular bands, and are great for use in mobile and infrastructure equipment.
Download Datasheet | Product Details
TCXO
26 MHz CMOS TCXO for Emergency Beacon Applications

TCXO  from Dynamic Engineers

The TCXO5300BT-CS-26MHz-A from Dynamic Engineers is a TCXO with an operating frequency of 26 MHz. It provides a CMOS output with a phase noise of -155 dBc/Hz @100KHz offset and has frequency stability of ±0.2 ppm over its operating temperature range from -40°C to +55°C. The oscillator requires a DC supply of 3.3 V and consumes a steady current of less than 3.2 mA.
Download Datasheet | Product Details
Bi-Directional Coupler
10 W Bi-Directional Coupler from 150 to 600 MHz

Bi-Directional Coupler  from JQL Electronics

The DC0150T0600NF-6dB from JQL Electronics is a Bi-Directional Coupler that operates from 150 to 600 MHz. It provides 6 dB of coupling with more than 20 dB directivity and has an insertion loss of less than 1.7 dB. The coupler can handle an average input power of 10 W and peak power of 20 W. It is available in a module that measures 434 × 49 × 20 mm and has N-type (female) connectors.
Download Datasheet | Product Details
Switch Matrix
8 x 8 Blocking Switch Matrix from DC to 18 GHz

Switch Matrix  from JFW Industries

The 50MS-404 from JFW Industries is an 8 x 8 Blocking Switch Matrix that operates from DC to 18 GHz. It provides over 75 dB of isolation and has an insertion loss of 1.6 dB @6 GHz. This absorptive switch matrix can handle an average input power of up to 1 W (hot switched) / 30 W (cold switched) and has a switching speed of 15 milliseconds.
Download Datasheet | Product Details
Sponsored by Warrior RF
 
 
 
Microwave Generator
3 KW GaN Solid-State Microwave Generator from 2.4 to 2.5 GHz

Microwave Generator  from RFHIC

The RIU243K0-40TG from RFHIC is a Solid-State Microwave Generator that operates from 2400 to 2500 MHz. It delivers an output power of 3 KW and has a peak efficiency of 55%. This Microwave Generator has a unique configuration where the GaN SSPA head is separate from the control module and PSU allowing for greater flexibility.
Download Datasheet | Product Details
Analog Phase Shifter
360° Voltage Controlled RF Phase Shifter from 1 to 2 GHz

Analog Phase Shifter  from Corry Micronics

The CMIVCPS01000200A from Corry Micronics is a Voltage Controlled RF Phase Shifter that operates from 1 to 2 GHz. It provides a phase shift of 360° and has an insertion loss of less than 5.5 dB. The phase shifter can handle 100 W of input power and has a VSWR of less than 2.5:1. It requires a control voltage from 0 to 12 V and consumes 5 mA of current.
Download Datasheet | Product Details
RF & Microwave Isolator
2 W Coaxial Isolator from 27 to 31 GHz

RF & Microwave Isolator  from MECA

The IK-29.000 from MECA is a coaxial isolator that operates from 27 to 31 GHz. It has an insertion loss of 0.5 dB and provides over 20 dB of isolation. The isolator can handle up to 2 watts of average power and up to 30 watts of peak power. It has 2.92 mm female stainless steel connectors.
Download Datasheet | Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzer for 5G mmWave Networks

RF Spectrum Analyzer  from ThinkRF

The R5750 from thinkRF is a Real-Time Spectrum Analyzer that operates from 9 kHz to 27 GHz. mmWave signals don't propagate very far and are attenuated by small objects or walls. As a result, multiple analyzers are usually required to capture a signal reliably. The thinkRF analyzer is ideal for effective and economical spectrum monitoring applications.
Download Datasheet | Product Details
RF Cable Assembly
Ultra-Flexible RF Cables from DC to 26.5 GHz

RF Cable Assembly  from HASCO Components

The Littlebend™ from Hasco are Ultra-Flexible RF Cables that operate from DC to 26.5 GHz. These extremely flexible, triple-shielded cables have been designed for demanding microwave interconnect applications and system designs requiring dense packaging. The cables are available in standard lengths from 3 to 48 inches (can also be ordered in custom lengths) with high-performance SMA straight connectors. 2.92mm and 2.4mm connector options also available.
Download Datasheet | Product Details
RF Module
Bluetooth LE 5.2 Module with Mesh, NFC, Thread and Zigbee Support

RF Module  from Insight SiP

The ISP2053-AX from Insight SiP is a Bluetooth LE 5.2 Module that supports Mesh, NFC, Thread and Zigbee, IEEE 802.15.4 and ANT wireless protocols. It delivers a data rate of up to 2 Mbps and has a range of 450 m with a Tx power of 8 dBm and has an Rx sensitivity of up to -104 dBm. It supports all Bluetooth protocols like BLE Audio, Direction Finding, high-throughput, Advertising Extensions and Long Range along with Angle-of-arrival (AoA) and angle-of-departure (AoD) roles.
Download Datasheet | Product Details
Antenna
Dual Polarized Antenna Probes from 0.8 to 40 GHz

Antenna  from Microwave Vision Group

The SPxx Series from Microwave Vision Group (MVG) are Dual Polarized Antenna Probes that operate from 0.8 to 40 GHz. These linearly polarized probes consist of a wideband orthomode junction (OMJ) based on an inverted quad-ridge circular waveguide with external feeding circuits that feed a circular aperture. They provide a gain of more than 6 dBi, have a cross-polar discrimination of more than 40 dB and a polarization orientation of under 0.6°.
Download Datasheet | Product Details
RFID Tag IC
Long-Range Dynamic NFC/RFID Tag ICs

RFID Tag IC  from STMicroelectronics

The ST25DV-I2C Series from STMicroelectronics are Dynamic NFC/RFID Tag ICs that operate at a frequency of 13.56 MHz. They are compatible with NFC phones and readers. These ICs have a half-duplex 256-byte buffer which provides fast transfers between an embedded host and an NFC phone. They require a DC supply from 1.8 to 5.5 V and also have an energy harvesting feature.
Download Datasheet | Product Details
Diplexer
IP67-Rated 60/300 W Diplexer for 700 MHz Band 14 Injector DAS Applications

Diplexer  from Microlab

The BK-2016E from Microlab is a Diplexer that allows combination and separation of the signals in 758-798 MHz (Port 1) band and 698 - 746 MHz, 824-894 MHz, 1695-220 MHz, and 2305-2360 MHz (Port 2) bands. It injects Band 14 into multi-band DAS networks. To minimize band inter-reaction, the inputs are well isolated and have a low insertion loss over their respective frequency bands.
Download Datasheet | Product Details
Antenna
Cost-Effective Antenna for Radial Isotropic Measurements from 150 MHz to 18 GHz

Antenna  from Aaronia AG

The OmniLOG PRO Series from Aaronia are Omnidirectional Antennas that operate from 150 MHz to 18 GHz. They have a radial isotropic design that can cover all RF sources from VHF to K-band. These antennas can receive linear, vertically polarized signals and handle a CW input power of up to 1 W. They are available in IP65-certified, compact enclosures with a magnetic base for installation over suitable platforms.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]