1. everything RF
  2. RF Newsletters
more
PREV 3 Nov, 2021 NEXT

New RF and Microwave Products this Week

3 Nov, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 3 Nov, 2021
 
Sponsored by Signal Hound
 
 
 
New RF and Microwave Products this Week
RF Transistor
430 W LDMOS Doherty Power Transistor from 2496 to 2690 MHz

RF Transistor  from Ampleon

The BLC10G27XS-400AVT from Ampleon is an LDMOS Doherty Power Transistor that operates from 2496 to 2690 MHz. It delivers peak output power of 430 W with power gain of 13.3 dB and has a drain efficiency of 45%. This rugged transistor requires a DC supply voltage of 28 V. It has low thermal resistance which provides excellent thermal stability and has low memory effects for digital pre-distortion.
Download Datasheet | Product Details
Software Defined Radio
Software-Defined Radio with Tuning Range from DC to 9 GHz

Software Defined Radio  from Per Vices

The Chestnut from Per Vices is a Software-Defined Radio (SDR) designed for wireless communication, spectrum monitoring signals intelligence, and phased arrays applications. It has a 4 receive and 4 transmit radio chain architecture with each radio chain being independently controlled and offering an RF bandwidth of 500 MHz (2 GHz RF bandwidth capture when all chains are enabled).
Download Datasheet | Product Details
Rubidium Oscillator
10 MHz Ultra-Portable High Precision & Performance Rubidium Oscillator

Rubidium Oscillator  from Orolia

The Spectratime mRO-50 from Orolia is a 10 MHz Low SWaP-C Miniaturized Rubidium Oscillator that has been designed to meet the latest commercial, military, and aerospace requirements where time stability and power consumption are critical. The clock design is based on the proven rubidium clock heritage at Orolia and it has been adapted for low power (0.36 W @ 3.3V) and size.
Download Datasheet | Product Details
Handover Test System
8x1 Programmable Attenuator Assembly from 30 to 6000 MHz

Handover Test System  from JFW Industries

The 50PA-1205 from JFW Industries is a Programmable 8x1 Attenuator Assembly that operates from 30 to 6000 MHz. It consists of eight programmable attenuators (0-95dB x 1dB step) that connect to an 8-Way splitter/combiner. The eight attenuators can be remotely controlled via an Ethernet connection. The attenuator assembly provides an attenuation range of 0-95 dB in 1 dB steps with an accuracy of 4% (± 1.25 dB).
Download Datasheet | Product Details
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz

Frequency Synthesizer  from Holzworth Instrumentation

The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3, or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers provide a frequency step size of 0.001 Hz, have a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet | Product Details
Cellular Module
4G LTE-A Cat 6 Module

Cellular Module  from Quectel

The EM060K-GL from Quectel is a 4G LTE-A Cat 6 Module that is compliant with the 3GPP Release 12 specification and supports worldwide LTE-A and UMTS/HSPA+ coverage. It delivers an uplink data rate of up to 50 Mbps and a downlink data rate of up to 300 Mbps. This module requires a DC supply of 3.135-4.4 V and consumes less than 22.1 mA of current.
Download Datasheet | Product Details
Sponsored by Signal Hound
Signal Hound
NEW – There’s more than one way to use your RF data.
RF analysis covers a wide range of activities, and engineering workflows are even more varied. Signal Hound RF test products are not only flexible in terms of hardware and system integration, but also function as a receiver with the ability to output RF data for analysis via a variety of methods. Click here to learn more.
 
Cellular IoT Module
LTE CAT M1 IoT Module with Integrated SIM for Global Operations

Cellular IoT Module  from Murata

The LBAD0XX1SC from Murata is an LTE CAT M1 Cellular IoT module that supports GPS/GNSS, Open MCU, and has integrated SIM features. It is based on the Altair ALT1250 chipset, has an integrated 26 MHz TCXO and a 32 kHz X'Tal timing component. The module is optimized to deliver Class 3 LTE output power and provides a transmit power of up to 23 dBm.
Download Datasheet | Product Details
RF Module
2.4 GHz WiFi 4 + Bluetooth 5.2 Modules

RF Module  from Laird Connectivity

The Sterling-LWB+ Series from Laird Connectivity are 2.4 GHz Wi-Fi 4 (802.11b/g/n) and Bluetooth v5.2 Modules. They are based on the Infineon CYW43439 chipset and have an integrated PA/LNA. The modules deliver a Tx power of up to 18 dBm and have Rx sensitivity of -94 dBm. The modules require a DC supply of 3.3 V and consume less than 301 mA of current in Tx mode.
Download Datasheet | Product Details
Low Noise Block
X-Band Low Noise Block Downconverter from 7.75 to 8.50 GHz

Low Noise Block  from AmpliTech

The APT5-LNB-XBAND from AmpliTech is a Low Noise Block Downconverter that converts an input RF frequency from 7.75-8.50 GHz to output IF frequency from 800-1550 MHz. It provides over 56 dB of gain and has an output P1dB of more than 15 dBm. The LNB has a VSWR of less than 1.7:1, provides an image rejection of above 30 dB, and has a phase noise density of -128 dBc for more than 1 MHz frequency offset.
Download Datasheet | Product Details
Threshold Detector
High-Speed, Threshold Detector from 4 to 6 GHz

Threshold Detector  from Planar Monolithics Industries

The TD-30T-SHS-218-2G4G-PECL-OPT4G6G-ADJ from Planar Monolithics Industries is a High-Speed Threshold Detector that operates from 4 to 6 GHz. The detector has a dynamic range from -20 to 10 dBm with a propagation delay of 15ns max and an LVPECL output. It requires a supply of ±15 V, draws less than 100 mA of current. The detector is available in a module that measures 2.2 x 1.5 x 0.4 inches and has SMA female connectors.
Download Datasheet | Product Details
GNSS Anti-Jamming Solution
Compact Anti-Jamming GNSS Antenna for Marine Vessels

GNSS Anti-Jamming Solution  from VERIPOS

The GAJT-410MS from Veripos is an Anti-Jamming Antenna that provides dynamic protection on GPS L1/L2, Galileo E1, QZSS L1/L2, and SBAS L1 frequencies. It enables situational awareness through jammer direction-finding and creating up to three simultaneous nulls for multi-jammer scenarios. This low size, weight, and power (SWaP) antenna protect against radio frequency (RF) interference with adaptive nulling.
Download Datasheet | Product Details
GNSS Module
Dual-Band Multi-Constellation GNSS RTK Module

GNSS Module  from LOCOSYSTECH

The RTK-1010 from Locosys is a Dual-Band GNSS RTK Module that supports GPS, GLONASS, BeiDou, GALILEO, and QZSS constellations. It uses a 12 nm process and integrates an efficient power management architecture for low power and high sensitivity operation. The module has a cold start acquisition time of 28 s and a cold start sensitivity of -148 dBm.
Download Datasheet | Product Details
Sponsored by Signal Hound
 
 
 
RF Inductor
Ceramic Wirewound Chip Inductors from 2.7 to 470 nH

RF Inductor  from Coilcraft

The 0603DC Series from Coilcraft are Ceramic Wirewound Chip Inductors with inductance values from 2.7 to 470 nH. These inductors achieve the industry’s highest Q factors in a 0603 size for super low loss in high-frequency circuits. Q factor can be as high as 177 at 2.4 GHz. They have an extremely high self-resonance of up to 11.4 GHz and DCR as low as 29 mOhms.
Download Datasheet | Product Details
RF Tapper
RF Tapper from 0.698 to 2.7 GHz

RF Tapper  from MECA

The LPU2N-03-1.700VWWP from MECA is an RF Tapper that operates from 0.698 to 2.7 GHz. It has a split ratio of 2:1 and a PIM of less than -165 dBc. This 50-ohm tapper can handle an average input power of up to 300 Watts and has an input VSWR of less than 1.15:1. It is available in a RoHS compliant package with N-type female connectors.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Controlled VNA from 300 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The SC5090 from Copper Mountain Technologies is a modular 2-port compact VNA for 2-path measurements that operates from 300 kHz to 9 GHz. It has a dynamic range of 140 dB, an output power of 15 dBm, and a typical measurement speed of 16 µs per point. The VNA has a directivity of 46 dB and can be used to measure all four S parameters (S11, S21, S12, and S22).
Download Datasheet | Product Details
RF Spectrum Analyzer
Spectrum Analyzer from 100 kHz to 3 GHz

RF Spectrum Analyzer  from Rohde & Schwarz

The HMS3000 from Hameg Instruments (an R&S company) is a spectrum analyzer that operates from 100 kHz to 3 GHz. It has an amplitude measurement range from -114 to 20 dBm and a DANL of -135 dBm with an optional preamplification stage. The analyzer has a sweep time of 20 ms to 1000 s and a resolution bandwidth of 100 Hz to 1 MHz.
Download Datasheet | Product Details
RF Transceiver
Tri-Band Sub-6 GHz 2x2 MIMO Transceiver for 5G NR Applications

RF Transceiver  from Metanoia Communications Inc.

The MT3812 from Metanoia is a Tri-Band 5G Sub-6 GHz 5G-NR Transceiver with support for 2x2 MIMO. It has a scalable architecture that can help in building higher density applications by using multiple instances of the chip. The transceiver supports 50 to 200 MHz channel bandwidth (BW) in TX mode and 20 to 200 MHz channel BW in RX mode.
Download Datasheet | Product Details
Directional Coupler
6 dB Directional Coupler from 2 to 50 GHz

Directional Coupler  from KRYTAR

The 102050006 from Krytar is a directional coupler that operates from 2 to 50 GHz. It provides 6 dB (±2.0 dB) of coupling with directivity of more than 10 dB and has an insertion loss of 2.8 dB. The coupler can handle 20 W of input CW power and has a VSWR of 1.8:1. It is available in a module that measures 1.75 x 0.40 x 0.65 inches with 2.4 mm SMA female connectors.
Download Datasheet | Product Details
Front End Module
Wi-SUN Front End Module from 863 to 928 MHz

Front End Module  from Skyworks Solutions

The SKY66122-11 from Skyworks is a Front End Module that operates from 863 to 928 MHz. It has been developed for high-power Industrial- Scientific-Medical (ISM) band, Wi-SUN, and other IoT applications. The FEM consists of an LNA, Power Amplifier, Tx & Rx power limiters, RF blocks that enable battery-powered operations, as well as an integrated power detector.
Download Datasheet | Product Details
GPS/GNSS Antenna
Active GNSS Ceramic Patch Antenna for Timing Solutions

GPS/GNSS Antenna  from Linx Technologies

The ANT-GNCP-C185L160 from Linx Technologies is an Active GNSS Ceramic Patch Antenna for the L1/E1/B1 bands. This RHCP antenna supports GPS, Galileo, GLONASS, Beidou, and QZSS systems. It has an integrated Low Noise Amplifier (LNA) that provides a peak gain of 13.4 dBi with a noise figure of 1.5 dB. It requires a DC supply of 3 V and consumes less than 5 mA of current.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]