|
New products this week. View it in your browser
| New RF and Microwave Products this Week |
|
|
|
|
|
|
| Extremely Small Very High Frequency Connectors |
RF Connector
from Rosenberger
|
| The WSMP® Connectors from Rosenberger are about 45% smaller than SMP connectors, and feature a high packing density, have a push-on coupling mechanism, and need a minimum board-to-board distance of 3.05 mm. These connectors operate at frequencies up to 100 GHz and can be used for aerospace, security, and defense applications. They are certified according to DIN EN 9100 for aerospace applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Low Noise Amplifier from 18 to 40 GHz |
RF Amplifier
from ERZIA
|
| The ERZ-LNA-1800-4000-15-4 from ERZIA is a Low Noise Amplifier that operates from 18 to 40 GHz. It provides a small-signal gain of 15 dB, has a noise figure of less than 8 dB, and a P1dB of over 14 dBm. The LNA has a gain flatness of ±1 dB and a VSWR of less than 1.8:1. It requires a DC voltage from 9 to 15 V and consumes 1.5 W of power. The amplifier is ideal for industrial, laboratory, satcom/telecom, space, aerospace, and military applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Automotive Radar Simulation Software |
Software
from Remcom
|
| WaveFarer® is a high fidelity automotive radar simulation software that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz. Applications include simulation of automotive drive scenarios, indoor sensors, and far-field radar cross-section (RCS). |
|
Download Datasheet |
Product Details
|
|
|
|
|
Sponsored by Digi-Key |
| Molex LoRa External Antennas |
| LoRa external flexible whip antennas operate on LoRa frequency bands for high performance. These antennas offer long-range coverage and operate on 868 MHz and 915 MHz LoRa frequencies, making them ideal for industrial and IoT applications in smart city and IT infrastructure. Click here to learn more. |
|
|
| |
|
| 2.4 GHz Bluetooth 5.0 Beacon SoC for IIoT Applications |
Wireless SoC
from InPlay Inc
|
| The IN100 NanoBeacon from InPlay is a 2.4 GHz Bluetooth 5.0 SoC that is designed for IIoT applications. It has a range of several hundred meters and has a firmware-less design that can be simply configured and used straight away because of a novel protocol implemented directly into its circuitry, eliminating the need for programming. The beacon requires a DC supply from 1.1 to 3.6 V and can operate on a single 1.5 V coin cell battery. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Rugged Low Noise Amplifier from 1 to 18 GHz |
RF Amplifier
from AmpliTech
|
| The APTMP4-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. It provides more than 35 dB of gain with a noise figure of less than 1.5 dB and a P1dB of 20 dBm. The LNA is fabricated using state-of-the-art PHEMT technology and is MIL-883 and MIL-45208 certified. It requires a DC supply from 11 to 24 V and consumes less than 350 mA of current. The LNA is ideal for military and commercial applications. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Surface-Mount Conical Inductors from 10 MHz to 40 GHz |
RF Inductor
from Coilcraft
|
| The BCR Series from Coilcraft are Conical Inductors that operate from 10 MHz to 40 GHz. They are available in inductance values from 0.22 to 8.00 µH and have a DC resistance (DCR) of less than 3.4 ohms. Their full-length cap protects the coil and provides a large surface for pick and place. These inductors are ideal for use in ultra-wideband bias T’s, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device. |
|
Download Datasheet |
Product Details
|
|
|
|
|
Sponsored by Digi-Key |
| 2-Hole Flange Adapters |
| These adapters include in-series threaded (SMA/2.92 mm/2.4 mm) as well as between-series push-on (SMP/SMPM) to threaded (2.92 mm/2.4 mm) options. Additionally, these adapters come with two screws for fast and easy installation. Click here to learn more. |
|
|
| |
|
| 4-Way Power Divider from 2 to 18 GHz |
Power Divider
from VidaRF
|
| The VPD-20180A4 from VidaRF is a 4-Way Power Divider that operates from 2 to 18 GHz. This power divider can handle up to 30 Watts of power, has an insertion loss of less than 1.8 dB and more than 17 dB of isolation. It has a low amplitude balance of 0.5 dB and phase balance of 12 degrees. Sealed and painted to meet IP65 standards, this power divider is available in a module with SMA-Female connectors. |
|
Download Datasheet |
Product Details
|
|
|
|
|
| Passive GaAs MMIC IQ Mixer from 4 to 16 GHz |
RF Mixer
from Marki Microwave
|
| The MMIQ-0416H from Marki Microwave is a GaAs MMIC IQ Mixer with an RF/LO frequency from 4 to 16 GHz and an IF frequency from DC to 6 GHz. This ultra-broadband mixer provides exceptional sideband suppression and LO to RF isolation while offering high linearity performance. It is ideal for single-sideband & image rejection mixing, IQ modulation/demodulation, vector amplitude modulation, band shifting, quantum computing, and communication applications. |
|
Download Datasheet |
Product Details
|
|
|
|
| | About everything RF | | everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more. |
|
| To unsubscribe please click here | [Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip] |
|
