PREV 8 Dec, 2021 NEXT

New RF and Microwave Products this Week

8 Dec, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 8 Dec, 2021
 
Sponsored by NXP Semiconductors
 
 
 
New RF and Microwave Products this Week
RF & Microwave Circulator
Ka-Band Self-Biased Circulators without Magnets

RF & Microwave Circulator  from Metamagnetics

The Self-Biased Circulators from Metamagnetics are unique Ka-Band circulators that do not use magnetic materials. The circulators use an innovative material that is created by aligning magnetic grains and then processing them at high temperatures to create an ultra-dense compact material that is free of defects and voids. These circulators have no magnets which results in a significant reduction in size and weight over traditional microstrip permanent magnet circulators.
Download Datasheet | Product Details
Beamforming IC
16-Channel Dual-Beam Rx Beamforming IC from 10.7 to 12.75 GHz

Beamforming IC  from Renesas

The F6121 from Renesas is a Dual-Beam Rx Beamforming RFIC that operates from 10.7 to 12.75 GHz. This 16-Channel IC has been designed for Ku-Band SATCOM Planar phased array antennas. It has eight RF input ports, two RF output ports, and 16 (8 per beam) phase/amplitude control channels. The eight input ports of the IC may be driven by eight single-polarized elements or four dual-polarized elements of an electronically scanned array (ESA).
Download Datasheet | Product Details
RF Amplifier
10 W GaN Solid-State Power Amplifier from 3 to 4 GHz

RF Amplifier  from NuWaves Engineering

The NW-PA-S-10-C01-S01 from NuWaves is an S-Band Solid-State Power Amplifier that operates from 3 to 4 GHz. It delivers a saturated output power of 10 W with a small signal gain of 52 dB and 26% efficiency. The SSPA is based on Gallium Nitride (GaN) technology and has an ON/OFF switching speed of less than 2 uS. It is ideal for use in size, weight, and power (SWAP) constrained broadband RF telemetry, tactical communication systems, unmanned aircraft systems (UAS) group 2 & 3, unmanned ground vehicles (UGV), and software-defined radios (SDR).
Download Datasheet | Product Details
RF Cable Assembly
70 GHz High Density Cable Assemblies for Test and Measurement

RF Cable Assembly  from Samtec

The Bulls Eye® product family from Samtec are high-density array designs and advanced cabling solutions that operate up to 70 GHz. Compression interface, small footprint and high cycle count make Bulls Eye® ideal for high-performance test applications. This cable solution enables smaller evaluation boards and shorter trace lengths making it ideal for Test & Measurement applications.
Download Datasheet | Product Details
RF Switch
SPDT Switch for Wi-Fi 6/6E Applications with 1.8 V Operating Voltage

RF Switch  from New Japan Radio

The NJG1818K75 from New Japan Radio (NJR) is an SPDT switch that has been designed to have a low insertion loss from 1 to 7.125 GHz (Covering the 5.925 to 7.125 GHz Wi-Fi 6/6E band). It has a switching time of less than 400 ns, an insertion loss of less than 0.55 dB, and provides 25 dB of isolation. The switch supports a wide operating voltage range from 1.6 to 5.0 V and can support a variety of power supply modes.
Download Datasheet | Product Details
Integrated Microwave Assembly
3U RF Up/Down Converter from 0.5 to 18 GHz for Electronic Warfare Applications

Integrated Microwave Assembly  from Cobham Advanced Electronic Solutions

The 3U RF Up/Down Converter from Cobham Advanced Electronic Solutions (CAES) operates from 0.5 to 18 GHz. This SOSA-aligned, single 3U slot up/down RF converter has an integrated LO and supports frequency preselection. It has an IF of 3.5 GHz and a tuning speed of 350 ns. The converter has a modular architecture and can accommodate various channel configurations such as 1 up and 1 down, 2 up or 2 down.
Download Datasheet | Product Details
Sponsored by NXP Semiconductors
NXP Semiconductors
NXP’s BTS7205H Dual-Channel Receive Front End Module Accelerates 5G Infrastructure
NXP’s BTS7205H is a 2.3 GHz to 2.7 GHz dual channel receiver analog front-end IC in a 5x5x0.85 mm lead frame HVQFN package. Designed for 5G mMIMO infrastructure applications, the BTS7205H product offers low current consumption, reducing carrier operating costs. It has been developed using our silicon germanium (SiGe) process. Click here to learn more.
 
RF Amplifier
200 W Solid-State Power Amplifier from 6 to 18 GHz

RF Amplifier  from Exodus Advanced Communications

The AMP2065A-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers a saturated output power of more than 200 W with a gain of over 53 dB. The amplifier has a class A/AB linear design and includes built-in protection circuits with extensive monitoring for forward/reflected power, VSWR, voltage, current & temperature sensing for superb reliability and ruggedness.
Download Datasheet | Product Details
OCXO
Ultra-Low Phase Noise Dual-Frequency (10/100 MHz) OCXO Module

OCXO  from NEL Frequency Controls

The O-CDFXYZXX-X-X-X-10MHz/100MHz from NEL Frequency Controls is a Dual-Frequency OCXO Reference Module that consists of 2 ultra-low phase noise OCXOs at 10 MHz and 100 MHz. It requires a DC supply of 5 V and consumes less than 6 W of power. The OCXO is available in a hermetically sealed package and is suitable for use in instrumentation, high-performance synthesizers, radar, and telecommunication equipment.
Download Datasheet | Product Details
RF Amplifier
12 W Power Amplifier from 0.7 to 6 GHz

RF Amplifier  from Mountain Microwave Technology

The MM-BPA-007060-43-41 from Mountain Microwave Technology is a Power Amplifier that operates from 0.7 to 6 GHz. It delivers a saturated output power of 41 dBm (~12 W) with a small signal gain of 43 dBm. The amplifier is input and output impedance-matched to 50 Ohms. It requires a DC supply of 28 V and consumes less than 1.5 A of current.
Download Datasheet | Product Details
Microwave Generator
6 kW GaN Solid-State Microwave Generator from 2.4 to 2.5 GHz

Microwave Generator  from RFHIC

The RIU256K0-40TG from RFHIC is a Solid-State Microwave Generator that operates from 2.4 to 2.5 GHz. It delivers a CW output power of up to 6 kW with an efficiency of 55% and has an optional Pulsed operating mode. The generator is built using RFHIC’s cutting-edge gallium-nitride (GaN) on SiC HEMTs providing excellent thermal stability and power.
Download Datasheet | Product Details
RF Amplifier
50 W GaN Solid-State Power Amplifier Module from 4 to 18 GHz

RF Amplifier  from Comtech PST

The BME49189-50 from Comtech PST is a GaN Solid-State Power Amplifier Module that operates from 4 to 18 GHz. It delivers an output power of more than 50 W with a gain of 49 dB and has a DC to RF efficiency of greater than 15%. This Class AB-linear amplifier has a noise output power level of -105 dBm/Hz, spurious level of less than -60 dBc, and harmonics of better than -35 dBc. It can be used in communication, electronic warfare, radar transmitter systems, AV/airborne, ground mobile, surface, and shipboard applications.
Download Datasheet | Product Details
RF Amplifier
GaAs MMIC Low Noise Amplifier from 0.01 to 9 GHz

RF Amplifier  from Analog Devices

The HMC8413 from Analog Devices is a GaAs MMIC Low Noise Amplifier that operates from 0.01 to 9 GHz. It delivers 19.5 dB gain with a noise figure of less than 2.8 dB and has a saturated output power of 22 dBm. This LNA is based on pHEMT technology and can also function as a local oscillator (LO) driver for balanced, in-phase/quadrature (I/Q) or image rejection mixers.
Download Datasheet | Product Details
Sponsored by NXP Semiconductors
 
 
 
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz

Frequency Synthesizer  from Holzworth Instrumentation

The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers provide a frequency step size of 0.001 Hz, have a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet | Product Details
Vector Network Analyzer
2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz

Vector Network Analyzer  from Copper Mountain Technologies

The C1209 is a two-port computer-controlled vector network analyzer that operates from 100 kHz to 9 GHz. It has a dynamic range of 148 dB and output power range from -60 dBm to 15 dBm. The VNA can measure all four S-Parameters, has a measurement speed of 10 microseconds and can measure up to 500,001 points.
Download Datasheet | Product Details
RF Spectrum Analyzer
Portable Spectrum Analyzer from 5 kHz to 3/14/26.5 GHz

RF Spectrum Analyzer  from Rohde & Schwarz

The FPL1000 from Rohde & Schwarz is a portable spectrum analyzer that operates from 5 kHz to 3/14/26.5 GHz. This instrument can be used for spectrum analysis, highly accurate power measurement with power sensors, and analysis of analog and digitally modulated signals. It has a resolution of 1 Hz and has a large 10.1" WXGA touchscreen that makes measuring fast and simple.
Download Datasheet | Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure for Applications up to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-1560-A from RF Electronics is an RF Shielded Test Enclosure that can be used to test devices operating up to 6 GHz. It has a thick RF absorbing foam that provides a reflection loss of over 18 dB at 2.4 GHz. The test enclosure has shielded power filters which can be used to power devices placed inside the enclosure while blocking all wireless signals.
Download Datasheet | Product Details
Wireless SoC
5GNR/LTE Small-Cell SoC for FR1 and FR2 Frequencies

Wireless SoC  from Picocom

The PC802 from Picocom is a 5G Small Cell SoC that is designed for 5GNR/LTE small-cell disaggregated and integrated RAN architectures in FR1 and FR2 frequencies. It supports Open RAN specifications, delivering a downlink data rate of up to 4 Gbps and an uplink data rate of up to 3 Gbps. This SoC supports simultaneous 5GNR/LTE mode, flexible multi-RAT, multi-carrier component configurations and Dynamic Spectrum Sharing (DSS).
Download Datasheet | Product Details
Cellular Module
5G SA/NSA Module for Operation in Asia, Europe, and Australia

Cellular Module  from Fibocom

The FG360-EAU from Fibocom is a 5G Module for the Asian, European, and Australian regions. It supports both 5G SA and NSA network architectures with fast transmission speeds, good carrying capacity, and lower network latency. The module supports the 5G NR Sub-6 GHz band and is compatible with LTE and WCDMA standards.
Download Datasheet | Product Details
Antenna
3G/4G/5G Flexible Antenna from 617 to 2690 MHz

Antenna  from Antenova

The Affini from Antenova is an FPC (Flexible Printed Circuit) Antenna that operates from 617-698/2300-2400/2500-2690 MHz covering common 3G, 4G, and 5G bands. This linearly polarized antenna provides a peak gain of 3.9 dBi with an efficiency of more than 45% and has a VSWR of less than 3.1:1. It is available in a self-adhesive 3M 468MP package that measures 78.00 x 17.00 x 0.15 mm and has a cable with an I-PEX MHF1 connector.
Download Datasheet | Product Details
Low Pass RF Filter
LTCC Dual Low-Pass Filter with a Passband from DC to 1.6 GHz

Low Pass RF Filter  from Mini Circuits

The DLFCV-1600+ from Mini Circuits is an LTCC Dual Low-Pass Filter with a passband from DC to 1600 MHz. It has a fast roll-off with a low insertion loss, low VSWR, and high-power handling capabilities. The filter can also operate as a balanced input / output filter. It is available in a small, rugged 1210 ceramic package that measures 0.126 x 0.098 x 0.039 inches, with wraparound terminations for excellent solderability.
Download Datasheet | Product Details
Directional Coupler
6 dB Directional Coupler from 130 to 520 MHz

Directional Coupler  from Werbel Microwave

The C-1352-06 from Werbel Microwave is a Directional Coupler that operates from 130 to 520 MHz. This 6 dB coupler has a directivity of 25 dB and an insertion loss of less than 2.2 dB. It can handle up to 60 W of CW input power and 3 W of reverse power. The coupler is available in a RoHS and REACH compliant module that measures 5.8 x 2.0 x 1.0 inches with N-type (female) connectors.
Download Datasheet | Product Details
RFID Tag
433 MHz Active Ultra-Thin RFID Tag with 80 m Range

RFID Tag  from GAO RFID

The 433 MHz Thinline IR Active RFID Tag from GAO RFID is an RFID tag with a read range of 80 m. It measures 54 x 33 x 5 mm and meets the EN 301 489 – 3: 2002 V1.4.1 and EN 300 220 – 2007: V2.1.2 standards. The tag requires a DC supply voltage of 3 V. It can be configured by using the provided software tools (SCIEL Prog IR tool & ERW configuration software).
Download Datasheet | Product Details
Base Station Antenna
4-Port 4x4 MIMO Base Station Antenna from 617 to 806 MHz

Base Station Antenna  from Kaelus

The P4GDLU01 from Kaelus is a Base Station Antenna that operates from 617 to 806 MHz. This 45° dual-polarized antenna has four RF ports that support 4x4 MIMO capability and uses an innovative slotted disc antenna technology. It can handle up to 450 W of input power per port, provides up to 18.2 dBi of gain over an extended tilt range, and has an azimuth beamwidth of 37°.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, articles, white papers, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]