1. everything RF
  2. RF Newsletters
more
PREV 15 Dec, 2021 NEXT

New RF and Microwave Products this Week

15 Dec, 2021 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 15 Dec, 2021
 
Sponsored by Mouser
 
 
 
New RF and Microwave Products this Week
RF Amplifier
1 kW Scalable Power Amplifier for Airborne Applications

RF Amplifier  from Cobham Advanced Electronic Solutions

The 8508093-1 from CAES is a High-Power Amplifier that is available in frequency options from VHF through the S-band. This ruggedized subassembly can be integrated into most aerospace or defense systems like unmanned aircraft, surface vessels, ground vehicles, missiles or space. The amplifier has a scalable design that can deliver over 1 kW of output power with 60 dB of gain.
Download Datasheet | Product Details
RF Amplifier
Josephson Parametric Amplifier from 5 to 7 GHz for Quantum Computing

RF Amplifier  from Raytheon BBN

The Wide-Band Josephson Parametric Amplifier (WB-JPA) from Raytheon BBN is a Low-Noise Amplifier that operates from 5 to 7 GHz. It has been designed for use in quantum computing and can operate at millikelvin temperatures. The amplifier provides a gain of 20 dB with a noise temperature of 295 mK (at 6.8 GHz). It has an instantaneous bandwidth of 300 MHz and can be tuned with an on-chip bias line.
Download Datasheet | Product Details
RF Amplifier
60 W GaN MMIC High Power Amplifier from 17.3 to 19.2 GHz

RF Amplifier  from Wolfspeed

The CMPA1H1J050F from Wolfspeed is an MMIC High Power Amplifier that operates from 17.3 to 19.2 GHz. It delivers a saturated output power of 60 W with a small signal gain of 28.9 dB and has a PAE of 29%. This amplifier utilizes Wolfspeed’s high performance, 0.15 um GaN on the SiC production process. It requires a DC supply of 28 V and draws 400 mA of current.
Download Datasheet | Product Details
Beamforming IC
WiGig/802.11ad Beamforming Transceiver RFIC from 57 to 71 GHz

Beamforming IC  from Sivers Semiconductors

The TRXBF01 from Sivers Semiconductors is a WiGig/802.11ad Beamforming Transceiver RFIC that operates from 57 to 71 GHz. This RFIC supports speeds up to 7 Gbit/s over long distances and is a good choice for unlicensed 5G applications. It supports 16+16 channel beamforming ICs has an integrated synthesizer. It supports any mmWave modem with zero-IF interface.
Download Datasheet | Product Details
Digital Attenuator
95 dB Programmable Solid-State Attenuator from 200 MHz to 8 GHz

Digital Attenuator  from JFW Industries

The 50P-2109 from JFW Industries is a Solid-State Programmable Attenuator that operates from 200 MHz to 8 GHz. It can provide attenuation from 0 to 95 dB in 1 dB steps and has a switching speed of less than 1 µs. This attenuator can handle up to 25 dBm of input power and has an insertion loss of less than 7 dB. It can be used in a wide range of applications including for testing Wi-Fi 6E devices.
Download Datasheet | Product Details
OCXO
Cost-effective, High-performance, Space-Qualified Master Crystal Oscillator

OCXO  from Orolia

The Spectratime LNMO from Orolia is a Space Qualified Crystal Oscillator with a frequency of 10 MHz (frequencies from 5 to 40 MHz are available on request). It produces an output signal of 7 dBm with an SSB phase noise of -140 dBc/Hz @ 1 kHz offset and frequency stability of ± 1x10-9 over a wide temperature range. This oscillator has been designed with the latest technologies, providing advanced features, such as long lifetime, high reliability, lightweight, and ultra-low phase noise, for next-generation space applications.
Download Datasheet | Product Details
Sponsored by Mouser
ADPA7008
ADPA7008 Power Amplifiers
Analog Devices ADPA7008 Power Amplifiers are GaAs, pHEMT, MMIC, 31dBm saturated output power (PSAT, 1W) distributed power amplifiers. The ADPA7008 includes an integrated temperature-compensated on-chip power detector that operates from 20GHz to 54GHz. Click here to learn more.
 
RF Inductor
0.22 µH to 8 µH, Conical Inductor operating from 10 MHz to 40 GHz

RF Inductor  from Coilcraft

The BCL Series are conical inductors available in nine inductance values ranging from 0.22 to 8.0 µH. They have been designed specifically for broadband and high-frequency applications, operating as a series of narrow-band inductors across a frequency range of 10 MHz to 40 GHz. The inductors are ideal for use in ultra-wideband bias tees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device.
Download Datasheet | Product Details
RF Transceiver
8Tx/8Rx SoC RF Transceiver with a Digital Front-End for 5G Radio Designers

RF Transceiver  from Analog Devices

The ADRV9040 from Analog Devices is a System on Chip (SoC) RF Transceiver that operates from 650 to 6000 MHz. It meets the high radio performance and low power consumption required by cellular infrastructure applications including small cell base station radios, macro 3G/4G/5G systems, and massive MIMO base stations.
Download Datasheet | Product Details
Software
3D EM Simulation Software for High-Fidelity Computations

Software  from Remcom

XFdtd is a full-wave 3D EM solver that simplifies the analysis of complex EM problems and leads the market in FDTD-based modeling and simulation. With unrivaled speed, XF is the leader for complex, high-fidelity EM simulations. Applications include microwave devices such as waveguides, power dividers, and filters; antenna design and placement; EMI/EMC testing; static discharge; signal integrity; SAR validation; radar and scattering; and photonics.
Download Datasheet | Product Details
RF Power Meter
10 kW RF Power Meter & Sensor from 0.2 to 200 MHz

RF Power Meter  from TEGAM

The GEMINI 5540A from TEGAM is an RF Power Meter that operates from 0.2 to 200 MHz. It has a power measurement range from 3 to 10,000 W with a 2-sigma accuracy of ±0.5% + 0.5 W across its power range. This power meter combines the sensor and meter into one convenient instrument which allows technicians to read forward and reverse power, VSWR, and frequency simultaneously.
Download Datasheet | Product Details
RF Amplifier
1200 W Solid-State Power Amplifier from 10 kHz to 225 MHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 1200A225A AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled amplifier, when used with an RF sweep generator, provides more than 1200 W of CW power with a gain of over 61.8 dB. It is protected from RF input overdrive by an input leveling circuit which controls the RF input level to the amplifier first stage when the input level is increased above 0 dBm.
Download Datasheet | Product Details
RF Amplifier
Low Noise Cryogenic Amplifier from 4 to 8 GHz

RF Amplifier  from AmpliTech

The APTC3-04000800-1K00-D4-V from Amplitech is a Low Noise Cryogenic Amplifier that operates from 4 to 8 GHz. It provides a gain of more than 40 dB with a noise figure of 0.35 dB and has a P1dB of -6 dBm. The amplifier requires a DC supply of 0.7 V and draws 20 mA of current (typical) while consuming 2.5 mW of power at 4°Kelvin.
Download Datasheet | Product Details
Sponsored by Mouser
 
 
 
Microwave Backhaul Radio Links
2 Gbps Terragraph-Certified Backhaul Radio from 57 to 66 GHz

Microwave Backhaul Radio Links  from Cambium Networks

The cnWave V1000 from Cambium Networks is a Backhaul Radio that operates from 57 to 66 GHz. It provides easy, fast, and cost-effective wireless gigabit connectivity for edge access and/or high-capacity backhaul for edge access solutions at a significantly lower cost than fiber infrastructure. The radio is certified for Facebook Terragraph technology and is highly efficient at handling high-density deployments in cities and suburban areas.
Download Datasheet | Product Details
RF Distribution System
2-Channel Radio Signal Conditioning & Distribution Unit from 100 kHz to 2.5 GHz

RF Distribution System  from Becker Nachrichtentechnik GmbH

The RSDU-2X4AR from Becker RF is a highly integrated signal distribution device for the production test of broadcast devices, like car radios that operate from 100 kHz to 2.5 GHz. It combines the distribution of test signals like AM, FM, DAB, SDARS or GNSS with the DC measurement functions required to validate phantom voltage for antenna supply. On top there is a wide range of integrated level adjustments allowing test scenarios down to the sensitivity testing and up to dynamic range testing.
Download Datasheet | Product Details
Data Link
High Power, High Data Rate MANET Radio from 400 MHz to 6 GHz

Data Link  from Triad RF Systems

The TSYS10XX from Triad RF Systems is a MANET Radio that operates from 400 MHz to 6 GHz. It has channel bandwidths of 5, 10, and 20 MHz, delivers a data rate of 65 Mbps (UDP) and 50 Mbps (TCP). This radio supports a wide range of modulation schemes including C-OFDM, BPSK, QPSK, 16-QAM, and 64-QAM. It is military qualified and the exact frequency range can be selected based on the terrain and application.
Download Datasheet | Product Details
RF Switch
SPDT Non-Reflective Switch from 0.5 to 18 GHz

RF Switch  from Planar Monolithics Industries

The P2T-0R5G18G-55-T-SFF-PN from Planar Monolithics Industries is an SPDT Non-Reflective Switch that operates from 0.5 to 18 GHz. The switch can handle up to 20 dBm of CW input power and has an insertion loss of less than 3.75 dB. It has a switching speed of less than 100 ns and provides more than 55 dB of isolation. The switch requires a DC supply of +5/-15 V and consumes less than 80 mA of current.
Download Datasheet | Product Details
RF Spectrum Recording and Playback System
Modular Digital Spectrum Recording System from 200 MHz to 6.7 GHz

RF Spectrum Recording and Playback System  from Wideband Systems, Inc

The DRS9300X from Wideband Systems is a Digital Recording System that operates from 200 MHz to 6700 MHz covering P Band, L Band, S Band, and C Band spectrum. It has been designed to record two RF signals (typically right-hand polarization and left-hand polarization) directly from the multi-coupler (between the antenna and receiver).
Download Datasheet | Product Details
Power Divider
16-Way Broadband RF Splitter from 500 MHz to 7 GHz Based on a Unique Patented Design

Power Divider  from BBTLine

The 16-Way RF Splitter (Version 1) from BBTLine can be designed to operate from 500 MHz to 7 GHz. This power divider is based on a unique Patented (U.S. Patent 9,570,792) design, not a Wilkinson Splitter/Combiner. It can handle more than 20 W of power and is available in a silver-finish surface mount package that measures 5.865 x 1.178 inches.
Download Datasheet | Product Details
RF Amplifier
20 W GaN MMIC Power Amplifier from 12 to 18 GHz

RF Amplifier  from Microchip Technology

The ICP1543 from Microchip is a 3-Stage MMIC Power Amplifier that operates from 12 to 18 GHz. It delivers an output of 43 dBm (~20 W) with a small signal gain of 24 dB and PAE of more than 32%. The amplifier is based on 0.15 µm GaN on SiC technology. It requires a DC supply of 20 V and consumes 300 mA of current. The amplifier is available as a bare die that measures 3.8 mm x 3.5 mm.
Download Datasheet | Product Details
RF Amplifier
4 kW SSPA from 9 to 10 GHz for Pulsed Radar Applications

RF Amplifier  from Communications & Power Industries

The VSX3717 from Communications & Power Industries is a Solid-State Power Amplifier that operates in the X-Band from 9 to 10 GHz. It delivers a saturated output power of 4 kW (pulsed), has a pulse width from 1 to 100 µs, and maximum duty cycle of 10%. The SSPA utilizes GaN transistors to provide high gain, high efficiency, and excellent pulse fidelity providing excellent AM/PM, phase-noise, and spectral re-growth.
Download Datasheet | Product Details
SATCOM Antenna
Ka-Band VSAT Terminal for Airborne SATCOM Applications

SATCOM Antenna  from Orbit Communication Systems

The MPT 30WGX from Orbit Communication Systems is Ka-Band VSAT System for Airborne SATCOM applications. This modular, highly reliable multi-role aviation terminal is fully interoperable between the Wideband Global Satcom (WGS) system, military Ka frequency range, and Inmarsat’s Global Xpress (GX) constellation. In Band 1, it has a Tx frequency from 29 to 30 GHz and an Rx frequency from 19.2 to 20.2 GHz while in Band 2 it has a Tx frequency from 30 to 31 GHz and an Rx frequency from 20.2 to 21.2 GHz.
Download Datasheet | Product Details
GPS/GNSS Antenna
Omni-Directional 5G Railway Rooftop Antennas

GPS/GNSS Antenna  from Huber+Suhner

The SENCITY® Rail Active from Huber+Suhner are Rooftop Railway Antennas for train-to-ground communications. They have an integrated connected compute module, cellular radios, Wi-Fi access point and GNSS receiver. The antennas have a single ethernet cable for power and data and are designed to meet the special requirements of railway applications, including high current and high voltage protection.
Download Datasheet | Product Details
Antenna
Flexible Planar Antennas from 2400-2500/4900-5875 MHz

Antenna  from Laird Connectivity

The Mini NanoBlade Flex from Laird Connectivity are Dual-band Flexible Planar Antennas that operate from 2400-2500 MHz and 4900-5875 MHz. These vertically polarized antennas provide more than 2.8 dBi of gain and have a VSWR of less than 2:1. They have an omnidirectional radiation pattern and efficiency better than 59%.
Download Datasheet | Product Details
Diplexer
150 W Diplexers with Passbands from 2-6/8-18 GHz

Diplexer  from Corry Micronics

The CMIDX Series from Corry Micronics are Diplexers with passbands from 2 to 6 GHz and 8 to 18 GHz. They can handle an input power of 150 W, have a passband insertion loss of less than 0.75 dB, and stopband attenuation of more than 40 dB. These diplexers are available in modules that measure 4.21 x 1.40 inches with N-type (female) connectors and require an external heatsink for operation.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]