1. everything RF
  2. RF Newsletters
more
PREV 19 Jan, 2022 NEXT

New RF and Microwave Products this Week

19 Jan, 2022 - everything RF Newsletter

New products this week. View it in your browser

 
Date: 19 Jan, 2022
 
Sponsored by Digi-Key
 
 
 
New RF and Microwave Products this Week
RF & Microwave Circulator
Rugged Ka-Band Self-Biased Circulators without Magnets

RF & Microwave Circulator  from Metamagnetics

The Self-Biased Circulators from Metamagnetics are unique Ka-Band circulators that do not use magnetic materials. The circulators use an innovative material that is created by aligning magnetic grains and then processing them at high temperatures to create an ultra-dense compact material that is free of defects and voids. They operate at frequencies from 26.5 to 40 GHz.
Download Datasheet | Product Details
RF Mixer
Triple-Balanced Mixer from 2 to 20 GHz

RF Mixer  from Teledyne Microwave Solutions

The MMP20281 from Teledyne Microwave Solutions is a Triple Balanced Mixer with an RF-LO frequency from 2 to 20 GHz and IF frequency from 5 to 6000 MHz. It has a conversion loss of less than 9.5 dB, provides an LO to RF isolation of more than 15 dB and an LO to IF isolation of 20 dB. The mixer is available in a standard Cougar Hi-Rel MixerPak package with SMA connectors.
Download Datasheet | Product Details
Direction Finding System
6 GHz Mobile Direction Finding System

Direction Finding System  from Rohde & Schwarz

The R&S®DDF550 from Rohde & Schwarz is a Direction Finding System that supports signals up to 6 GHz. It offers a real-time bandwidth of 80 MHz and has excellent DF scan speed as well as high DF accuracy, sensitivity and immunity to reflections. The direction finder supports active/passive switchable antennas that allow users to select higher sensitivity (active) or higher immunity to strong signals (passive).
Download Datasheet | Product Details
RF Test Set
Sub-6 GHz 5G-NR Mobile Device Test Platform from 450 MHz to 6 GHz

RF Test Set  from Anritsu

The ME7834NR from Anritsu is a 5G NR Mobile Device Test Platform that operates from 450 MHz to 6 GHz. It has been designed to perform 3GPP based Protocol Conformance Tests (PCT) and Carrier Acceptance Testing (CAT) of mobile devices incorporating Multiple Radio Access Technologies (RAT). This test platform supports 5G New Radio (NR) technology in both Standalone and Non-Standalone mode.
Download Datasheet | Product Details
RF Connector
SMP Connectors from DC to 40 GHz

RF Connector  from Linx Technologies

The SMP Connector Series from Linx Technologies operate from DC to 40 GHz. These 50-ohm miniature connectors are designed with many types and configurations including plugs, jacks, straight, right angle, and more. This series consists of 7 different SMP connectors. These PCB mounted connectors are available in both surface mount and through-hole mount options.
Download Datasheet | Product Details
GNSS Module
Multi-Frequency / Multi-Constellation GNSS Receiver for Automotive Applications

GNSS Module  from STMicroelectronics

The STA8100GA from STMicroelectronics is a multi-band / multi-constellation GNSS Receiver that has been designed for automotive applications. It supports GNSS constellations such as GPS, Galileo, Glonass, BeiDou, NAVIC (former IRNSS), and QZSS, in L1, L2, L5, and E6 frequency bands. This receiver is part of the Teseo V family and has STMicroelectronics’ dead reckoning firmware TESEO-DRAW.
Download Datasheet | Product Details
Sponored by Digi-Key
RSF Series of SAW Filters
RSF Series of SAW Filters
Raltron's RSF series of SAW (surface acoustic wave) filters are ideal for a wide range of IoT applications including LoRa, LTE, utility metering, smart home, and more. The SAW filters offer low insertion loss, superior attenuation, low ripple, and high temperature stability. Click here to learn more.
 
RF Amplifier
17 W mmWave Power Amplifier from 32 to 36 GHz

RF Amplifier  from MI-WAVE

The 955A-32/36.5/38/42.5/599 from MI-WAVE is a mmWave Power Amplifier that operates from 32 to 36 GHz. It delivers an output power of 17 W (42.5 dBm) with a small signal gain of 45 dB. This amplifier requires a DC supply of +6/+29 V and consumes less than 2.3 A of current. It is ideal for use in 5G/6G, test & measurement, mobile & satellite communications, weather & earth observation, and radar system applications.
Download Datasheet | Product Details
RF Amplifier
Solid State Low Noise Amplifier from 0.25 to 35 GHz

RF Amplifier  from Planar Monolithics Industries

The PEAFS3-14-0R2535R0-6R5-23-12-292FF from Planar Monolithics Industries is a Low-Noise Amplifier that operates from 0.25 to 35 GHz. It provides a gain of 14 dB with a noise figure of 6.5 dB and has a P1dB of more than 23 dBm. The LNA has internal voltage regulation and provides unconditional stability. It requires a DC supply from 12 to 15 V and draws under 300 mA of current.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier from 10.95 to 12.75 GHz

RF Amplifier  from AmpliTech

The APT5-10951275-40K15-WR75-ISOL from AmpliTech is a Low Noise Amplifier that operates from 10.95 to 12.75 GHz. It provides a gain of 56 dB with a noise figure of less than 0.54 dB and has a P1dB of 15 dBm. The amplifier utilizes state-of-the-art PHEMT technology and requires a 24 V DC supply. It is available in a module that measures 7.90 × 2.75 × 1.84 inches with SMA-female connectors.
Download Datasheet | Product Details
RF Amplifier
Dual-Path Low Noise Amplifier from 650 to 1000 MHz

RF Amplifier  from Renesas

The F0109 from Renesas is a Dual-Path Ultra-Low Noise Amplifier that operates from 650 to 1000 MHz. It provides 18 dB of gain with a noise figure of less than 0.7 dB and has an output P1dB of 24 dBm. The amplifier can be operated as a balanced amplifier where the inputs and outputs are combined using external 90° couplers. It requires a DC supply of 5V and consumes 115 mA of current.
Download Datasheet | Product Details
Software
Radar Simulation Software

Software  from Remcom

WaveFarer is a high fidelity radar simulator that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz. Applications include simulation of automotive drive scenarios, indoor sensors, and far-field radar cross-section (RCS).
Download Datasheet | Product Details
Termination
2 W Termination from DC to 8 GHz

Termination  from JFW Industries

The 50T-007 from JFW Industries is an RF Termination that operates from DC to 8 GHz. It can handle up to 2 W of average input power and 1 kW of peak power. The termination is matched to 50 ohms and has a VSWR of less than 1.25:1. It is available in a module with N-type (male) connectors.
Download Datasheet | Product Details
Sponsored by Digi-Key
Adapters
2-Hole Flange Adapters
These adapters include in-series threaded (SMA/2.92 mm/2.4 mm) as well as between-series push-on (SMP/SMPM) to threaded (2.92 mm/2.4 mm) options. Additionally, these adapters come with two screws for fast and easy installation. Click here to learn more.
 
Waveguide Filter
C-Band Waveguide Filters with Passband from 3.9 to 4.2 GHz

Waveguide Filter  from Vaunix

The VSF-G Series from Vaunix are C-Band SATCOM Waveguide Filters with passband from 3900 to 4200 MHz. They have an insertion loss of less than 1.3 dB in the passband and provide more than 25 dB rejection outside the passband. The filters have been designed for 5G mitigation (reject interference) and optimize SATCOM receiver performance.
Download Datasheet | Product Details
Triplexer
Low-PIM Triplexer for 600+700 MHz/PCS/AWS Bands

Triplexer  from Microlab

The BK-363E from Microlab is a Triplexer that allows combination and separation of 600+700 MHz/PCS/AWS bands. It has passbands from 617 – 798 MHz (LTE), 1850 – 1995 MHz (PCS) and 1710 – 1780/2110 – 2200 MHz (AWS). The triplexer can handle an input power of 50 W, has an insertion loss of less than 0.5 dB in the passband and provides input isolation of more than 50 dB.
Download Datasheet | Product Details
RF Transceiver
Low-Power Narrow-band RF Transceiver from 27 to 1050 MHz

RF Transceiver  from onsemi

The AX5043 from onsemi is a Narrow-band Sub GHz Low-Power RF Transceiver that operates from 27 to 1050 MHz. This transceiver supports FSK, MSK, 4-FSK, GFSK, GMSK, AFSK, and ASK modulations. It offers a unique combination of ultra-low power consumption for transmitting and receive operation combined with the highest sensitivity and high selectivity.
Download Datasheet | Product Details
RF Amplifier
250 W Multi-Purpose Solid-State Power Amplifier from 1 to 6 GHz

RF Amplifier  from AR RF/Microwave Instrumentation

The 250S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a saturated output power of more than 250 W with small-signal gain of 61 dB. The amplifier has a Class A design, making it suitable for EMC test applications where continued operation into high VSWR loads including open and short circuits is required.
Download Datasheet | Product Details
RF Amplifier
300 W Solid-State Power Amplifier from 0.8 to 2 GHz

RF Amplifier  from Ophir RF

The 5135 from Ophir RF is a Solid-State Power Amplifier that operates from 800 to 2000 MHz. It delivers an output power of more than 300 W with a small signal gain of over 56 dB. The amplifier utilizes Class A linear power devices that provide an excellent 3rd order intercept point, high gain, a wide dynamic range, and P1dB performance. It supports CW/AM/FM/PM/Pulse RF input signal formats.
Download Datasheet | Product Details
Band Pass Filter
2 W Bandpass Filter with Passband from 27.5 to 30 GHz

Band Pass Filter  from Cubic Nuvotronics, Inc.

The PSF29B02V2S from Nuvotronics is a Ka-Band Bandpass Filter with a passband from 27.5 to 30 GHz. It has an insertion loss of less than 0.5 dB and provides over 50 dB of rejection above and below the passband. The filter can handle a CW input power of up to 2 W and provides high-frequency performance with unparalleled flatness.
Download Datasheet | Product Details
RF Shielded Test Enclosure
Standalone Portable RF Shielded Test Enclosure from 20 MHz to 6 GHz

RF Shielded Test Enclosure  from RF Electronics

The HDRF-3933 from RF Electronics is a Standalone Portable RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This test box has been designed and developed for housing Environmental Test Chambers. It can be used for WLAN, Wireless device testing - supporting standards such as 802.11 a/b/g/n/ac, Bluetooth, RFID and 3G. This fully portable design is equipped with caster wheels for ease of movement.
Download Datasheet | Product Details
Signal Generator
High-Performance Signal Generator from 10 MHz to 18 GHz

Signal Generator  from Boonton

The SGX1018 from Boonton is a Signal Generator that operates from 10 MHz to 18 GHz. It delivers an output power from -20 to +18 dBm with a phase noise of -106 dBc/Hz and has a frequency switching speed of 200 µs. It has spurious levels of -75 dBc (from 10 MHz to 4 GHz) and harmonics of -60/-70 dBc. It has USB and Ethernet RJ-45 interfaces and can be remotely controlled using SCPI-1999.0 command set.
Download Datasheet | Product Details
Directional Coupler
380 to 960 MHz, 250 Watts, 20 dB Directional Coupler

Directional Coupler  from MECA

The 715-20-0.670 from MECA is a directional coupler that operates from 380 to 960 MHz. It has a coupling value of 20 dB and can handle up to 250 watts of power. The coupler has an insertion loss of less than 0.1 dB and directivity of more than 25 dB. It is available in a module with N-type female connectors and operates over a temperature range of -55°C to +85°C.
Download Datasheet | Product Details
Directional Coupler
30 dB Directional Coupler from 1 to 18 GHz

Directional Coupler  from ZTS Technologies

The ZDC30N-010180-400 from ZTS Technology is a Directional Coupler that operates from 1 to 18 GHz. This 30 dB coupler has a directivity of more than 10 dB and an insertion loss of less than 0.8 dB. It can handle an input power of 400 W. The coupler is available in a module with N-type (female) I/O connectors and an SMA-female connector for the coupling port.
Download Datasheet | Product Details
Directional Coupler
13 dB Directional Coupler from 18 to 26.5 GHz

Directional Coupler  from KRYTAR

The 262213 from Krytar is a Directional Coupler that operates from 18 to 26.5 GHz. This 13 dB coupler has a directivity of more than 13 dB and an insertion loss of less than 1.2 dB. It can handle an average input power of 20 W, peak input power of 3 kW, and has a VSWR of less than 1.4:1. The coupler is available in a module that measures 1.20 x 0.64 x 0.53 inches and has 3.5 mm-type female (male optional) connectors.
Download Datasheet | Product Details
Antenna
Versatile Outdoor Antenna for Fleet and Public Safety Vehicles

Antenna  from Airgain

The MULTIMAX from Airgain are Outdoor Antennas that have been designed for Cellular, Wi-Fi and GNSS applications. They are available in multiple configurations that offer up to 6 embedded antenna technologies over multiple bands. They provide high-performance connectivity for Fleet and Public Safety vehicles and assets.
Download Datasheet | Product Details
GPS/GNSS Antenna
5G/WiFi/GNSS Multi-mode Antenna for IIoT Networks

GPS/GNSS Antenna  from PCTEL

The Medallion II from PCTEL is a 5G/WiFI/GNSS Multi-mode Antenna for cabinet mounted industrial IoT applications. It has two 5G FR1 ready ports (includes CBRS bands), an optional dual-band 2.4/5 GHz port for WiFi coverage and GNSS compatibility covering global systems. The Medallion II covers GNSS frequencies from 1565 to 1608 MHz and that includes GPS L1, GALILEO E1, GLONASS L1, QZSS L1, and BEIDOU B1 constellations.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]