PREV 2 Feb, 2022 NEXT

New RF and Microwave Products this Week

2 Feb, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 2 Feb, 2022
 
Sponsored by everything PE
 
 
New RF and Microwave Products this Week
Antenna Measurement System
Automotive Antenna Measurement and OTA Test System from 70 MHz to 10 GHz

Antenna Measurement System  from Microwave Vision Group

The SG 3000 from Microwave Vision Group is a Multi-Probe System for full-scale vehicle antenna measurements and OTA testing. It supports near-field/spherical technology testing from 70 MHz to 10 GHz. This test system can support 5G FR1 NSA and SA and C-V2X OTA measurements for automobiles in compliance with the 5GAA Vehicular Antenna Test Methodology (VATM) Standard, as well as the emerging UWB technology.
Download Datasheet Product Details
RF Transceiver
E-band Transceiver Module from 71 to 86 GHz

RF Transceiver  from Filtronic

The Morpheus II from Filtronic is an E-band RF Transceiver that provides a turn-key solution for carrier-grade mobile XHaul applications. This transceiver has integrated Rx modules that operate from 71-76 /81-86 GHz and features a diplexer that can be interfaced with an antenna. It can support a data rate of up to 10 Gbps and spectrally efficient 256QAM modulation.
Download Datasheet Product Details
Power Divider
2-Way Multi-Octave Power Divider from 2 to 26.5 GHz

Power Divider  from TRM Microwave

The DMS265 from TRM Microwave is a 2-Way Multi-Octave Power Divider that operates from 2 to 26.5 GHz. It can handle an input power of up to 10 W, has an insertion loss of 1 dB, and provides isolation of 15 dB. This power divider has a VSWR of less than 1.5:1, an amplitude balance of 0.4 dB, and a phase balance of 4°. It is ideal for serial data transmit/receive systems, test systems, and general-purpose lab use.
Download Datasheet Product Details
Voltage Controlled Oscillator
Surface-Mount Voltage Controlled Oscillator from 6.9 to 8.9 GHz

Voltage Controlled Oscillator  from Teledyne Microwave Solutions

The OS8900 from Teledyne Microwave Solutions is a Voltage Controlled Oscillator that operates from 6900 to 8900 MHz. It provides an output power of more than 1 dBm with an SSB phase noise of -95 dBc/Hz at 100 kHz offset. The VCO has a tuning voltage from 0 to 15 V and a modulation sensitivity of 60-310 MHz/V.
Download Datasheet Product Details
RF Cable Assembly
110 GHz Highly-Flexible Cable Assembly

RF Cable Assembly  from Huber+Suhner

The NANOBEND™ from HUBER+SUHNER is a Highly-Flexible Cable Assembly that operates from DC to 110 GHz. It has been designed for use in low profile, internal, point-to-point interconnections between RF modules and communication systems. This cable assembly is extremely flexible and can even be bent where the cable and connector meet, without compromising on signal strength or stability.
Download Datasheet Product Details
RF Connector
20 GHz Mini-Coax Connectors for Automotive Industry

RF Connector  from Rosenberger

The HFM® (High-Speed FAKRA-Mini) from Rosenberger are “Mini-Coax” FAKRA Connectors that operate up to 20 GHz. These intelligent modular connectors enable the transmission of high data rates up to 28 Gbps. They have an innovative design that addresses the growing requirements for cost savings as well as reduced weight and size.
Download Datasheet Product Details
RFID Tag
860-960/13.56 MHz On-Metal RFID Inlay with NFC

RFID Tag  from Avery Dennison

The Midas Flagtag EM4425 DF from Avery Dennison is a Dual-Frequency On-Metal RFID Inlay that operates in the UHF band of 860-960 MHz and HF band (NFC) of 13.56 MHz. It has NFC capability which allows the consumer to verify the authenticity of the purchased product as well as engage with product or brand information, while the UHF capability can be used by the retailer to maximize inventory management and accuracy.
Download Datasheet Product Details
RFID Antenna
Rugged Low-Profile FCC/ETSI RFID Antenna

RFID Antenna  from Zebra

The AN520 from Zebra is a Rugged RFID Antenna that is suitable for indoor and outdoor environments. This right hand circular polarized antenna provides a gain of 5.5 dBic and has a VSWR of 1.4:1. It operates from 902 to 928 MHz for FCC and 865 to 868 MHz for ETSI. The antenna has a 3 dB beamwidth of 115° in both planes and an axial ratio of 2 dB.
Download Datasheet Product Details
RF Amplifier
250 W Solid-State Power Amplifier from 80 to 1000 MHz

RF Amplifier  from Exodus Advanced Communications

The AMP2040B-LC from Exodus Advanced Communications is a Solid- State Power Amplifier that operates from 80 to 1000 MHz. It delivers an output power of more than 250 W with 54 dB of gain. This linear Class A/AB amplifier is equipped with built-in protection circuits with extensive monitoring that includes forward/reflected power monitoring, VSWR, voltage/current/temperature sensing for superb reliability and ruggedness.
Download Datasheet Product Details
Featured Interview
Altum RF
Interview with Greg Baker from Altum RF
Altum RF was founded in 2019 to address RF, microwave and millimeter-wave applications using sate-of-the-art GaAs and GaN technologies. They design and develop a broad range of high-performance RF products for commercial and industrial applications. everything RF recently interviewed Greg Baker, CEO of Altum RF. Read Interview.
EMC Immunity Test System
Four-Tone EMC Immunity Test System from 80 MHz to 6 GHz

EMC Immunity Test System  from AR RF/Microwave Instrumentation

The MT4IEC10V3M from AR RF/Microwave Instrumentation is an EMC Immunity Test System that operates from 80 MHz to 6 GHz. It has four internal signal generators that can generate four simultaneous test frequencies which can reduce the sweep time by 74%. It includes two RF amplifiers that provide an output power of more than 125 W.
Download Datasheet Product Details
RF Module
2.4/5 GHz Wi-Fi (802.11 a/b/g/n) + Bluetooth LE 5.0 Module

RF Module  from Telit Communications

The WE310G4 from Telit is a Dual-Band Wi-Fi (802.11 a/b/g/n) and Bluetooth Low Energy (BLE) 5.0 Coexistence Module that operates in the 2.4/5 GHz bands. It provides a low-cost, high-speed serial-to-Wi-Fi/BLE connection to an embedded design built on an 8/16/32-bit microcontroller through UART, SPI, or SDIO interfaces.
Download Datasheet Product Details
RF Module
2.4 GHz Proprietary/Bluetooth LE 5.1 Radio Module

RF Module  from Wurth Elektronik

The Setebos-I from Wurth Elektronik is a 2.4 GHz Radio Module with configurable Proprietary/Bluetooth LE 5.1 modes. It uses the nRF52840 SoC from Nordic Semiconductors and can work as a Thyone-I module (proprietary mode) or a Proteus-III module (BLE 5.1 mode). The module delivers an RF bitrate of up to 2 Mbps and has a line-of-sight range of 600 m.
Download Datasheet Product Details
Termination
Space-Qualified Outrigger Terminations from DC to 27 GHz

Termination  from Smiths Interconnect

The SpaceNXT HC Series from Smiths Interconnect are Outrigger Terminations that operate from DC to 27 GHz. They are specifically designed and tested to meet space orbit environmental criteria. These terminations use a patented layout to offer improved power handling over conventional surface mount solutions without compromising performance.
Download Datasheet Product Details
RF Switch
10 W High-Speed SPDT Switch from 0.7 to 6 GHz

RF Switch  from New Japan Radio

The NJG1817ME4 from New Japan Radio is an SPDT Switch that operates from 0.7 to 6 GHz. This switch provides an insertion loss of 0.45 dB with isolation of more than 25 dB. It has a switching speed of less than 350 ns and can handle an input power of up to 10 W. The switch requires a DC voltage of 3.3 V and draws 7 µA of current. It is available in an EQFN12-E4 package that measures 2.0 x 2.0 x 0.4 mm.
Download Datasheet Product Details
RF Amplifier
15 GHz to 18 GHz Low Noise Amplifier with 26 dB Gain

RF Amplifier  from Planar Monolithics Industries

The PE2-28-15G18G-4R0-13-12-SFF is a Low Noise Amplifier that operates from 15 GHz to 18 GHz. The amplifier provides 26 dB of gain with a noise figure of 4 dB and has a P1dB of 13 dBm. It requires a 12 to 15 V supply to operate while drawing 200 mA of current. It is available with SMA Male connectors.
Download Datasheet Product Details
RF Transistor
107 W LDMOS Power Transistor from 420 to 851 MHz

RF Transistor  from NXP Semiconductors

The A2V07H400-04N from NXP Semiconductors is an Airfast® LDMOS Doherty Power Transistor that operates from 420 to 851 MHz. It delivers an output power of 107 W with a gain of up to 19.9 dB and more than 53% efficiency. The transistor is designed for digital pre-distortion error correction systems and has a greater negative gate-source voltage range for improved Class C operation.
Download Datasheet Product Details
RF Variable Attenuator
Programmable Solid-State Attenuator Assembly from 200 to 8000 MHz

RF Variable Attenuator  from JFW Industries

The 50PA-1183-XX from JFW Industries is a Bi-Directional, Programmable Attenuator Assembly that operates from 200 to 8000 MHz. It is available with 1 to 8 solid-state step attenuators (user can specify the number of attenuators required), each providing up to 95 dB of attenuation with 1 dB step sizes. The attenuators have an insertion loss of less than 8 dB and a typical switching speed of 4 µs.
Download Datasheet Product Details
Antenna
Flexible Printed Circuit Antenna from 410 to 450 MHz for LTE Applications

Antenna  from Antenova

The Atta (SRFI079) from Antenova is a Flexible Printed Circuit (FPC) Antenna that operates in LTE Bands from 410 to 450 MHz. This linearly polarized antenna provides a peak gain of 2.8 dBi with an efficiency of more than 45% and has a VSWR of less than 3:1. It is available in a self-adhesive 3M 468MP FPC package that measures 101.00 x 20.00 x 0.15 mm with a 150 mm long cable and an I-PEX MHF1 connector.
Download Datasheet Product Details
RFID Reader Module
Low-Power RAIN RFID Reader with Programmable Output Power

RFID Reader Module  from CAEN RFID

The Lepton7 (Model R7100C) from CAEN RFID is an ultra-compact reader for low power, high performance RAIN RFID applications. It has a programmable output power from 10 to 30 dBm and can detect tags at a range of more than 5 m. The module is based on the Impinj E710 chipset that provides a fast reading speed and enables applications in dense reader and tag environments.
Download Datasheet Product Details
Directional Coupler
6 dB Directional Coupler from 2 to 50 GHz

Directional Coupler  from KRYTAR

The 102050006 from Krytar is a Directional Coupler that operates from 2 to 50 GHz. This 6 dB coupler has a directivity of more than 10 dB and an insertion loss of less than 2.8 dB. It can handle up to 20 W of CW input power and has a VSWR of 1.8:1. The coupler is uniquely designed for applications where external leveling, precise monitoring, signal mixing, or swept transmission and reflection measurements are required.
Download Datasheet Product Details
Band Pass Filter
mmWave LTCC Bandpass Filter with Passband from 25 to 27.5 GHz

Band Pass Filter  from Mini Circuits

The BFCQ-2602+ from Mini Circuits is an LTCC Bandpass Filter with a passband from 25 to 27.5 GHz (5G n258 band). It has a passband insertion loss of 2 dB and provides stopband rejection up to 50 dB. This filter can handle an RF input power of up to 1 W and is based on LTCC materials with a distributed filter topology. It is available in a surface-mount LGA package that measures 2.5 x 2.0 mm.
Download Datasheet Product Details
Band Pass Filter
Band-Pass Filter with Passband from 3.4 to 4.2 GHz

Band Pass Filter  from Knowles

The B038NC4S from Knowles Precision Devices is a Band-Pass Filter with a passband from 3.4 to 4.2 GHz. It has an insertion loss of less than 2.25 dB and provides more than 40 dB of rejection above and below the passband. This filter utilizes DLI’s low loss temperature stable materials which offer small size and minimal performance variation over temperature.
Download Datasheet Product Details
Switched Filter Bank
2-7 Channel Switched Filter Banks from 20 to 7500 MHz

Switched Filter Bank  from API Technologies

The 310-020050 Series from API Technologies are Switched Filter Banks that operate from 20 to 7500 MHz. They can be customized to have 2 to 7 channels and have a switching speed of less than 500 ns (TTL control). The filter banks have an insertion loss of less than 6.5 dB and providmore than 55 dB o frejection. These filter banks require a DC supply of 5 V and consume less than 75 mA of current.
Download Datasheet Product Details
VNA Calibration Kit
2-Port USB-Powered Automated Calibration Kit from 300 kHz to 8.5 GHz

VNA Calibration Kit  from Pico Technology

The SOLT-AUTO-F from Pico Technology is a 2-Port Automated Calibration Kit that operates from 300 kHz to 8.5 GHz. It is designed for PicoVNA Vector Network Analyzers and just requires one connection to conduct all calibrations. The process becomes automatic and highly repeatable, with power, control, and data read all managed by the PicoVNA software over a USB interface.
Download Datasheet Product Details
Sponsored by everything PE
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]