1. everything RF
  2. RF Newsletters
more
PREV 1 December, 2014 NEXT

News, White Papers & Featured Products

Dec 1, 2014 - everything RF Newsletter
 
everything RF
Date: Dec 1, 2014
 
Find & Compare Waveguide Products
 
 
 
Industry News
Qorvo (RFMD + TriQuint) to Start Trading on Jan 2, 2015 - Qorvo
Huawei Ascend Mate 7 Phone Powered by ANADIGICS WiFi Solution - ANADIGICS
PIMinator MIMO DAS Ceiling Mount Antennas Provide High Multi-Port Performance - Pulse Electronics
IDT Introduces Internally Matched Broadband RF VGA with Ultra-High Linearity - Integrated Device Technology
New Cost-effective WLAN Offload Testing Solution for Mobile Device Verification from Anritsu - Anritsu
Lime Microsystems Launches Programmable Dual Transceiver from 0.1 to 3800 MHz - Lime Microsystems
New Murata Library of Inductor & Capacitor Components Now Available in AWR Microwave Office - NI AWR
More News
White Papers
Radar & Electronic Warfare Testing: Identifying Common Test Challenges - Keysight Technologies
RF and Microwave Fiber Optic Delay Line Techniques - EasternOptX
Introduction to LTE Device Testing - From Theory To Transmitter and Receiver Measurements - National Instruments
The Design Of Single-Ended & Differential MMIC VCOs - Plextek RF Integration
Design of A Monolithic, Dual Channel, DC to 20GHz SPDT - Plextek RF Integration
More White Papers
Upcoming Events
Event Image
IMaRC 2014 - International Microwave and RF Conference

Date: 15 to 17, December 2014

Location: Bangalore, India

 
More Upcoming events
News, White Papers & Featured Products
Drop-In Circulator
Drop-in Circulator from 925 to 960 MHz

Drop-In Circulator from VidaRF

The VDC-092096-2 is a low cost Drop-In 1x1&rdquo Circulator that operates from 925 to 960 MHz and is designed for various wireless and power applications. The robust design provides high performance and reliability. It has a low insertion loss of 0.3 dB and an isolation of 23 dB with a VSWR of 1.15:1 and can handle up to 250 W of power. To ensure long term performance in a variety of applications, this circulator is package is Beryllium oxide (BeO) free and Neodymium (Nd) free.
 
Download Datasheet | Product Details
 
Band Pass Filter
5745 MHz Cavity Filter Customizable to Spec

Band Pass Filter from Networks International Corporation

This cavity bandpass filter from NIC has a passband from 5725 to 5765 MHz and can be used for a number of wireless applications including 5.8 GHz WiFi. It has an insertion loss of less than 1.75 dB over the passband and a rejection of over 20 dBc from DC to 5705 MHz & from 5785 to 6200 MHz. It is available in a compact module with coaxial connectors. Custom designs are available up to the Ku band.
 
Download Datasheet | Product Details
 
Band Pass Filter
S Band Cavity Filter with Custom Configuration Available

Band Pass Filter from Networks International Corporation

The CV series are S-Band cavity filters with a center frequency of 3.5 MHz and a 210 MHz 0.5 dB bandwidth. It has an insertion loss of 1 dB max, a stop band attenuation of 60 dB at 3300 MHz and is matched to 50 Ohms. The device is available with SMA female connectors in surface mount package and measures 2.50 x 0.83 x 0.40 in with custom designs available.
 
Download Datasheet | Product Details
 
Coaxial Termination
DC to 18 GHz, 2 W, N Type - Female Coaxial Termination

Coaxial Termination from HASCO Components

The 221-34-50-001 from Hasco Components Distribution is a 50 Ohm, N Type - Female coaxial termination. It operates from DC to 18 GHz and can handle up to 2 W of power. It can operate at a temperature from -55 to 125 degrees C.
 
Download Datasheet | Product Details
 
RF Cable Assembly
DC to 40 GHz Cable Assemblies with Stainless Steel Armor and 2.92 mm Connectors

RF Cable Assembly from HASCO Components

The HLL150 series are flexible and low loss cable assemblies that operate up to 40 GHz. They have a 24 pF/Ft capacitance and 83% velocity propagation with an insertion loss of 0.75 dB per ft. at 40 GHz. The cables have a stainless steel armor and are available with 2.92mm Male/Female connectors.
 
Download Datasheet | Product Details
 
Fixed Attenuator
0 to 10 dB, 12, 15 and 20 dB, 0.75 W Fixed Attenuator from DC to 18 GHz

Fixed Attenuator from Aeroflex - Inmet

The PCAAL Series are chip attenuators that operate from DC to 18 GHz. They are available in attenuator configurations from 0 to 20 dB and can handle up to 750 mW of average power. The PCAAL Series consist of a laser trimmed distributed thin film element on an alumina ceramic substrate with a protective paint layer and solderable leads.
 
Download Datasheet | Product Details
 
Surface Mount Termination
DC to 4 GHz Surface Mount Termination from 10 to 150 Watts

Surface Mount Termination from Aeroflex - Inmet

The Series KAC are Surface Mount Terminations that operate from DC to 4 GHz. They are available in a number of frequency and power configurations from 10 W to 150 W. These terminations can be directly mounted on to PC boards eliminating the need for expensive mounting flanges and input tabs. They are manufactured using the environmentally friendly AlN substrate and are RoHS compliant.
 
Download Datasheet | Product Details
 
RF Switch
20 W Reflective SPDT Switch from 8 to 18 GHz

RF Switch from Planar Monolithics Industries

The P2T-8G18G-45-R-SFF-HP20W from PMI RF is a 20 Watt SPDT reflective switch that operates from 8 to 18 GHz. The switch has a low insertion loss of under 2.5 dB and an isolation of over 45 dB. It has a VSWR of 2.0:1, a fast switching speed with a rise time of 75 ns and a fall time of 25 ns. The switch requires a voltage of 5 to 28 V to operate and is available in a hermetic sealed package with SMA female connectors.
 
Download Datasheet | Product Details
 
RF Detector
High Speed Threshold Detector from 2 to 18 GHz

RF Detector from Planar Monolithics Industries

The TD-30T-SHS-218-12G18G-PECL from PMI is a high speed threshold detector that operates from 2 to 18 GHz. It has an adjustable threshold level from -20 to -17 dBm, has a VSWR of 3:1 and requires a supply of +/- 15 V while drawing 100 mA. The detector has a propagation delay of 15 ns max and is available in a module with SMA female connectors.
 
Download Datasheet | Product Details
 
GPS/GNSS Antenna
Miniature GNSS Receive Passive Horizontal-Mount PCB Antenna

GPS/GNSS Antenna from Parsec Technologies, Inc.

The PTA1.5-V is a miniature printed circuit board (PCB) laminate based passive antenna that operates from 1560 to 1610 MHz. It easily integrates with GNSS/GPS receivers with a single direct connection. The antenna has a gain of 1.6 dB at 1560 MHz and a low noise figure of less than 1 dB. The antenna has a dimension of 6.30 x 14.95 x 0.8 mm (L x W x thickness). It is mounted horizontally with respect to Earth within miniature GNSS receivers via surface mount technology (SMT) reflow using low cost industry standard methods.
 
Download Datasheet | Product Details
 
RF Connector
DC to 18 GHz, N type Connector for High Power RF Applications

RF Connector from MOLEX

The Type N Connector series from Molex consists of Plug, Jack, 50 Ohm and 75 ohm connectors with a VSWR of 1.15:1. The connectors have a voltage rating of 1000 Vrms and can operate up to 11 GHz (50 Ohms) or 6 GHz (75 Ohms). They operate at a temperature from -55 to 165 Degrees C.
 
Download Datasheet | Product Details
 
Coaxial Termination
100 Watts Low PIM Termination from 0.698 to 2.7 GHz

Coaxial Termination from MECA

The LPTC100-NF from MECA is a 100 Watt termination that operates from 0.698 to 2.7 GHz. It can handle 100 Watts of average power and 2500 watts of peak power with low PIM levels of less than -160 dBc. The termination is available with brass albaloy plated N Type – Female connectors and measures 8.50 inch (length) and 3.0 inch (diameter).
 
Download Datasheet | Product Details
 
Power Divider
2 Way low PIM power divider that operates from 0.698 to 2.7 GHz

Power Divider from MECA

The LPR2N-1.900-M01WWP is a 2 Way low PIM power divider that operates from 0.698 to 2.7 GHz. It can handle up to 700 W of power and has an insertion loss of 0.3 dB typically. The power divider has a PIM level of below -153 dBc (-165 dBc typically). It is available in a connectorized module with N Type - Female brass albaloy plated connectors. The divider operates at a temperature from -55° C to +85° C and weighs 10.2 oz.
 
Download Datasheet | Product Details
 
RF Amplifier
2.9 to 3.3 GHz GaN Amplifier for Radar System Applications

RF Amplifier from RFHIC

The HR2933-50A from RFHIC is a GaN hybrid power amplifier that operates from 2.9 to 3.3 GHz. It has an output power of 47 dBm, power gain of 24 dB, has a 10% duty cycle and 500us pulse width. The amplifier requires a supply voltage of 50 V and is available in a compact surface mount package.
 
Download Datasheet | Product Details
 
Power Divider
4 Way Power Divider from 698 to 2700 MHz

Power Divider from VidaRF

The VPD-0627A4 is a 4 way rf power divider that operates from 0.698 to 2.7 GHz for all wireless applications from cellular through UMTS. It can handle up to 30 Watts of power, has an insertion loss of less than 1.2 dB and an isolation over 20 dB. The power divider is available with SMA, QMA or alternative connector options.
 
Download Datasheet | Product Details
 
Waveguide Product Database
waveguide
Find & Compare Waveguide Products
Find & Compare Waveguide Components using the parametric search tools on everything RF. There are over 6000 Products listed from more than 20 Manufacturers in 10 Categories. Download datasheets, get quotations and discovery new products based on your requirement.
 
 
 
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.