1. everything RF
  2. RF Newsletters
more
PREV 7 March, 2022 NEXT

Latest News & White Papers this Week

7 March, 2022 Newsletter - everything RF

Top stories this week. View it in your browser

 
Weekly Edition
Date: 7 March, 2022
 
Sponsored by Square Peg Communications
 
 
Latest News this Week
New Frequency Converter from Quantum Machines Simplifies RF Engineering Tasks for Quantum Researchers - Quantum Machines
Qualcomm to Launch World's First Wi-Fi 7 Product having Peak Speed of 5.8 Gbps - Qualcomm
Kumu Networks Develops Full Duplex Chip with Self-Interference Cancellation Technology for 5G Applications - Kumu Networks
ZTE Showcases its Reconfigurable Intelligent metaSurface Solution for 5G/6G at MWC 2022 - ZTE
Ignion Using Cloud Computing and AI to Transform the Antenna Design Process - Ignion
MediaTek and Anritsu Verify First DAPS Handover for 5G-NR with Ultra-Low Latency - Anritsu
Renesas Develops RF Transceiver Technologies to Enhance Bluetooth Power Efficiency and Reduce Circuit Size - Renesas
Pharrowtech Launches CMOS RF Chip and Phased Array Antenna for FWA, 5G and Wi-Fi Applications - Pharrowtech
Anokiwave Introduces Multi Band Silicon based mmWave 5G Beamformer ICs - Anokiwave
Infineon Introduces Antenna Tuners to Enhance Battery Life and Signal Quality in 5G Smartphones - Infineon Technologies
Kratos Defense & Security Solutions Acquires RF Power Amplifier Company, CTT Inc. - KRATOS General Microwave
Rohde & Schwarz Provides Highly Accurate Calibration Technology to the US Air Force - Rohde & Schwarz
More News
New White Papers & Articles
Automatic Fixture Removal Plug-in Method Selection for VNA Measurements - Copper Mountain Technologies
Four Functions That Enhance Network Analysis - Keysight Technologies
What is Pulse Shaping? - Empower RF
Improving T/R Module Test Accuracy and Throughput - Rohde & Schwarz
What is g-sensitivity in an Oscillator?
More Whitepapers
Sponsored by Square Peg Communications
Square Peg Communications
The stakes are high — and you need to be sure it works.
Born of a complete rethink of testing, the RLS-2100 Radio Link Simulator is an affordable all-in-one system that applies a comprehensive set of impairments for complex wideband scenarios. Supports single or multi-orbit constellations, including LEO. Click here to learn more.
Upcoming Event
Event Image
EuMW 2021
Date: 2 to 7 April, 2022
Location: ExCel, London
More Events
Featured Products this Week
Rubidium Oscillator
10 MHz Rubidium Atomic Clock Oscillator
Rubidium Oscillator  from IQD Frequency Products
The IQRB-3 from IQD Frequency Products is a Rubidium Atomic Clock Oscillator that operates at a frequency of 10 MHz. It can be synchronized to a 1PPS signal or produce a 1PPS output by itself and has frequency stability of ±0.03 ppb. This oscillator produces an output level of up to +8 dBm that is sine compatible. It can also produce a CMOS output (optional feature).
Download Datasheet | Product Details
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz
Frequency Synthesizer  from Holzworth Instrumentation
The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers provide a frequency step size of 0.001 Hz, have a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet | Product Details
RF Amplifier
1000 W Solid-State Power Amplifier from 1 to 2.5 GHz
RF Amplifier  from Exodus Advanced Communications
The AMP2082LC from Exodus Advanced Communication is a Solid-State Power Amplifier that operates from 1 to 2.5 GHz. It delivers a saturated output power of more than 1000 W with a power gain of over 60 dB. The amplifier has a Class A/AB linear design and uses high-power advanced devices that provide high efficiency with excellent reliability and ruggedness.
Download Datasheet | Product Details
RF Amplifier
4 kW Rack-Mount Pulsed TWT Amplifier from 2 to 8 GHz
RF Amplifier  from ETS-Lindgren
The 8100-027 from ETS-Lindgren is a Pulsed TWT Amplifier that operates from 2 to 8 GHz. It delivers an output power of 4000 W with pulse width from 200 ns to 50 µs. This amplifier has harmonics of better than -10 dBc and a VSWR of less than 2:1. It can be controlled via GPIB and LAN interfaces. The amplifier is available in a rack-mount 8U enclosure that measures 19.0 x 24.8 inches.
Download Datasheet | Product Details
RF Module
Bluetooth 5.2 Low Energy Modules for Advanced Applications
RF Module  from u-blox AG
The NORA-B10 Series from u-blox are Standalone Bluetooth 5.2 Low Energy Modules with an integrated MCU for industrial automation, medical and healthcare, smart cities, and smart buildings. These modules are built on the Nordic nRF5340 chip and have dual Arm® Cortex®-M33 processor cores with integrated flash and RAM memory.
Download Datasheet | Product Details
RF Module
802.11 b/g/n Wi-Fi Module for Industrial IoT Applications
RF Module  from Microchip Technology
The WFI32E01PC from Microchip Technology is a 2.4 GHz 802.11 b/g/n Wi-Fi Module with a hardware-based security accelerator. It has been developed for Industrial IoT applications. The module contains the PIC32MZW1 series Wi-Fi SoC and is available in a module with a PCB antenna.
Download Datasheet | Product Details
Sponsored by Square Peg Communications
 
 
Front End Module
Front-End RFIC for Bluetooth Range Extension
Front End Module  from BeRex, Inc.
The 8TR1218 from Berex is a Bluetooth LE Smart Front-end RFIC that is designed for range extension of Bluetooth Smart, 802.15.4, ZigBee/Thread, ANT+ and proprietary ISM wireless systems that operate in the 2.4 GHz band. It consists of an integrated power amplifier (PA), a bi-directional bypass, a transmit/receive (T/R) switch, filter networks, and input/output matching circuitry.
Download Datasheet | Product Details
RF Amplifier
2-Stage InGaP Power Amplifier from 2.4 to 2.5 GHz
RF Amplifier  from Skyworks Solutions
The SKY65006-348LF from Skyworks is a linear, high-gain two-stage InGaP power amplifier that operates from 2.4 to 2.5 GHz. It has an integrated output power detector and second harmonic (F2) filter, designed for low voltage operations. The amplifier provides up to 27 dB of gain and +18 dBm of linear power for 802.11g, +21 dBm of mask-compliant power for 802.11b and 15.4 dBm of power for 15.4 dBm.
Download Datasheet | Product Details
RF Spectrum Analyzer
High Performance Signal Analyzers for mm-Wave 5G and SATCOM Applications
RF Spectrum Analyzer  from Keysight Technologies
The N9042B UXA X-Series from Keysight Technologies are Signal Analyzers that operate from 2 Hz to 26.5/44/50 GHz and cover current 5G-NR, FR1, FR2 as well as most RADAR, EW and satellite bands. They provide an ultra wide analysis bandwidth of up to 11 GHz which is configured using an external digitizer. The analyzers have an excellent swept Displayed Average Noise Level (DANL) of -174 dBm.
Download Datasheet | Product Details
RF Spectrum Analyzer
Low Cost, Software-Upgradeable Spectrum Analyzer from 5 kHz to 3 GHz
RF Spectrum Analyzer  from Rohde & Schwarz
The FPC1000 from Rohde & Schwarz is a software-upgradeable spectrum analyzer that operates from 5 kHz to 1 GHz, which can be expanded to 2 GHz or 3 GHz via software upgrades (keycode upgrade concept). The device provides a low noise floor level of -150 dBm, which can be further extended to -165 dBm with an optional, keycode-activated preamplifier.
Download Datasheet | Product Details
RF Transistor
5 W Surface-Mount LDMOS FET from 900 to 2700 MHz
RF Transistor  from Wolfspeed
The PTFC270051M from Wolfspeed is an LDMOS FET that operates from 900 to 2700 MHz. It delivers an output power of 5 W with a power gain of 20 dB and has a drain efficiency of 60%. This FET requires a DC supply of 28 V. It is available in a small over-molded surface-mount plastic package that measures 4.00 x 4.00 x 1.42 mm and is ideal for multi-standard cellular power amplifiers applications.
Download Datasheet | Product Details
RF Amplifier
Low Noise Amplifier MMIC from 2 to 4 GHz
RF Amplifier  from AmpliTech
The AGM-024 from AmpliTech is a Low Noise Amplifier MMIC that operates from 2 to 4 GHz. It delivers a saturated output power of 14 dBm with a gain of more than 27.4 dB and has a noise figure of less than 0.7 dB. The MMIC uses state-of-the-art GaAs pHEMT technology and is self-biased. It requires a DC supply voltage of 7 V, draws 30 mA of current, and consumes 210 mW of power.
Download Datasheet | Product Details
Band Pass Filter
Bandpass Filter from 29510 to 29746 MHz
Band Pass Filter  from Mercury Systems
The E1507 from Mercury Systems is a Bandpass Filter with a passband from 29510 to 29746 MHz. This Ka-band BPF has an insertion loss of less than 1.5 dB and a passband phase deviation of under ± 5°. It provides a rejection of 40 dB (at 29114 and 30112 MHz) and 60 dB (from 1 to 29000 MHz and 30500 to 40000 MHz) and has a VSWR of less than 1.5:1.
Download Datasheet | Product Details
Fixed Attenuator
Low PIM Fixed Attenuator from 698 MHz to 2.7 GHz
Fixed Attenuator  from MECA
The LPA100-6-1WWP from MECA are Low PIM Fixed Attenuators that operate from 698 MHz to 2.7 GHz. They are available in multiple attenuation configurations from 6 - 30 dB (other options are also available) with an accuracy of ±1.5 dB. These RoHS-compliant attenuators can handle 100 W of average power, 1500 W of peak power and have a VSWR of 1.20:1.
Download Datasheet | Product Details
Data Link
NSA-Certified Link 11 Data Terminal Set for Airborne Applications
Data Link  from Leonardo DRS
The DTS-K from Leonardo DRS is a Link 11 Data Terminal Set that integrates a data link modem and cryptographic equipment in one chassis for airborne (fixed or rotary wing) or platforms with size and weight constraints. It generates both Convention Link 11 Waveforms (CLEW), and Single-tone Link 11 Waveforms (SLEW) for improved performance in the presence of multipath commonly found in the HF environment.
Download Datasheet | Product Details
RF Switch
High-Speed Reflective SP4T Switch from 1 to 18 GHz
RF Switch  from KRATOS General Microwave
The E9140H from Kratos is a Reflective SP4T Switch that operates from 1 to 18 GHz. It provides an insertion loss of less than 2.8 dB and an isolation of 60 dB. This switch can handle an input power of up to 200 mW and has a VSWR of less than 2:1. It has a rise/fall time of 10 nsec and supports TTL control interface. The switch requires a DC supply of +5/-12 V and consumes up to 135 mA of current.
Download Datasheet | Product Details
Balun
1:4 Surface-Mount Transformer from 500 to 2500 MHz
Balun  from MiniRF
The XFM-2501-4WH from MiniRF is an RF Transformer that operates from 500 to 2500 MHz. It has an unbalanced to balanced impedance ratio of 1:4. This 50-ohm transformer can handle an RF power of up to +33 dBm. It is available in tape-and-reel surface-mount packages that measure 0.200 x 0.150 x 0.153 inches.
Download Datasheet | Product Details
RF Variable Attenuator
64 Channel USB/Ethernet Controlled Attenuator from 50 to 8000 MHz
RF Variable Attenuator  from Adaura Technologies
The AD-64AR38G95 from Adaura Tech is a Rackmount Programmable RF Attenuator that operates from 50 to 8000 MHz. It has 64 individually controlled RF chains and provides an attenuation range from 0 to 95 dB in 0.25 dB steps for each channel with an attenuation transition time of 425 ns. The attenuator provides interchain and external isolation of over 110 dB and has an insertion loss of less than 12 dB.
Download Datasheet | Product Details
Power Divider
3-Way Wilkinson Power Divider from 4.5 to 5.4 GHz
Power Divider  from TTM Technologies
The PD4955J5050S3HF from Anaren is a 3-Way Wilkinson Power Divider that operates from 4500 to 5455 MHz. It can handle an input power of 5 W (@105°C), has an insertion loss of less than 0.6 dB, and provides more than 16 dB of isolation between the ports. This power divider has an amplitude balance of ±0.6 dB and a phase balance of ±4°.
Download Datasheet | Product Details
Waveguide Circulator
3 kW 3-Port Waveguide Circulator from 3.1 to 3.5 GHz
Waveguide Circulator  from Renaissance Electronics Corporation
The 3WR284NA from Renaissance is a 3-Port Waveguide Circulator that operates in the S-band from 3.1 to 3.5 GHz. It can handle an average power of 3 kW and a peak power of 30 kW. The circulator provides more than 20 dB of isolation, has an insertion loss of less than 0.25 dB, and has a VSWR of 1.15:1.
Download Datasheet | Product Details
Low Noise Block
Ka-Band Block Downconverter Series from 17.8 to 21.2 GHz
Low Noise Block  from Jersey Microwave
The Ka-Band Block Downconverter Series from Jersey Microwave convert an input signal from 17.8 to 21.2 GHz and to output signal from 1 to 2.5 GHz. They provide more than 30 dB of gain, have a noise figure of less than 15 dB and a P1dB of 18 dBm. These downconverters have in-band spurious levels of better than -65 dBc and SSB phase noise of -102 dBc/Hz @ 100 kHz offset.
Download Datasheet | Product Details
Termination
2 W RF Terminations from DC to 18 GHz
Termination  from L-COM
The LCTR Series from L-COM are RF Terminations that operate from DC to 18 GHz. They can handle an input power of 1 W/2 W and have a VSWR of less than 1.4:1. These terminations are available in modules with SMA or N-type (male/female) connectors and can be used to terminate coaxial cables, multi-coupling devices, and test equipment across a variety of applications.
Download Datasheet | Product Details
Base Station Antenna
4-Port 4x4 MIMO Antenna from 3100 to 4200 MHz
Base Station Antenna  from Communication Components Inc
The QPA33F-H2A from Communication Components Inc (CCI) is a 4-port antenna that operates from 3100 to 4200 MHz. This dual-linear 45° polarized antenna provides a gain of 19 dBi and has a VSWR of less than 1.5:1. It has a horizontal beamwidth of 41°, an elevation beamwidth 7.7°, and an electrical downtilt of 4°.
Download Datasheet | Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]