PREV 16 March, 2022 NEXT

New RF and Microwave Products this Week

16 March, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 16 March, 2022
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week
RF Amplifier
300 W Linear Solid-State Amplifiers from 380 MHz to 6 GHz
RF Amplifier  from Rohde & Schwarz

The R&S®BBA300 from Rohde & Schwarz are Solid-State Amplifiers that operate from 380 MHz to 6 GHz. They deliver a linear output power of up to 300 W with outstanding noise power density and excellent harmonic characteristics. This single amplifier solution eliminates the need to switch instruments or bands during a test, which facilitates testing on automotive and ultrawide band wireless communication radios.
Download Datasheet Product Details
Radar Sensor
60 GHz Radar Sensor for Short Range Sensing Applications
Radar Sensor  from Infineon Technologies

The BGT60TR13C from Infineon Technologies is a Radar Sensor that operates from 58 to 63.5 GHz. This sensor is ideal for short-range sensing applications such as radar front-ends for gesture sensing, high-resolution FMCW radars, and hidden sensing applications behind a radome. It has a full-duplex FIFO structure as a data buffer with optimized power models for low power operation.
Download Datasheet Product Details
RF Connector
IP67/IP68-Rated Waterproof RF and Microwave Connectors
RF Connector  from IntelliConnect

The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA.
Download Datasheet Product Details
In Series RF Adapter
SMP Spring Loaded Adapters from DC to 40 GHz
In Series RF Adapter  from SV Microwave

The SMP Spring-loaded adapters from SV Microwave eliminate the gap between the bullet and shroud for maximum RF performance from DC to 40 GHz. These adapters have been designed for repeatable VSWR performance under all states of compression by solving radial misalignment issues when fully mated. They are ideal for use in military and aerospace, large scale blind-mate arrays, and board-to-board connections with multiple simultaneous mates.
Download Datasheet Product Details
RF Distribution System
High-Precision Fully-Automatic 8 Channel Signal Source from 1.7 to 9.8 GHz
RF Distribution System  from Becker Nachrichtentechnik GmbH

The TSQA-1X8PMF from Becker RF is a Fully Automatic 8-Channel Signal Source that operates from 1700 to 9800 MHz. It has been developed for High-temperature Operating Life Time (HTOL) testing applications. The RF sub-system delivers an output power of 5 W per channel with a power accuracy of ±0.3 dB and provides output isolation of 80 dB between ports.
Download Datasheet Product Details
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers
Signal Generator  from Holzworth Instrumentation

The HSX Series are broadband, phase coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz and 40 GHz. They have industry leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm. They are available in 1, 2, 3 or 4 channel Custom COTS models.
Download Datasheet Product Details
Sponsored by Mouser
NXP
Smart Home and Control solutions
NXP Semiconductors Smart Home and Control products provide low- to high- end hardware and software solutions for smart home applications including home control, sense and security. i.MX 8M Mini Applications Processors deliver advanced processing capabilities with sophisticated audio, video and graphics. Click here to learn more.
Integrated Microwave Assembly
5G Open-Radio Unit for O-RAN Deployments
Integrated Microwave Assembly  from AmpliTech

The A1001-RU-1 from AmpliTech is a 5G Open-Radio Unit (O-RU) for sub-6 GHz deployment from 2.496 to 2.69 GHz and 3.4 to 4.0 GHz. It utilizes GaN power amplifiers along with 64 phased array elements for digital beamforming. This O-RU consists of three main parts: the first is the Radio Frequency Processing Unit (RFPU) which includes the antennas, high power amplifiers, low noise amplifiers, duplexers, and other functions.
Download Datasheet Product Details
RF Amplifier
Thin-Film CougarPak® Amplifier from 2 to 20 GHz
RF Amplifier  from Teledyne Microwave Solutions

The ACP20015 from Teledyne Microwave Solutions is a Thin-Film Amplifier that operates from 2 to 20 GHz. It provides a small signal gain of 9 dB, has a noise figure of less than 6.5 dB, and a P1dB of up to 16 dBm. The amplifier requires a DC supply of 5 V and draws less than 100 mA of current. It is available in a standard connectorized single-stage CougarPak package with SMA connectors.
Download Datasheet Product Details
Rubidium Oscillator
High-Performance, Space-Qualified Rubidium Atomic Frequency Standard
Rubidium Oscillator  from Orolia

The RAFS (Rubidium Atomic Frequency Standard) from Orolia is a state-of-the-art ultra-stable atomic clock that provides excellent stability. It’s designed with the latest technologies, providing advanced features, such as long lifetime, high reliability, lightweight and ultra-low phase noise, for next-generation space applications.
Download Datasheet Product Details
RF & Microwave Circulator
Surface Mount Circulators from 200 MHz to 15 GHz
RF & Microwave Circulator  from UIY Inc.

The UIYSC Series from UIY Inc are Surface Mount Circulators that operate from 200 MHz to 15 GHz. They have an insertion loss of less than 0.5 dB and provide 20-25 dB of isolation. These circulators can handle forward/reverse power from 15 to 200 W and have a VSWR of less than 1.25:1. They are available as surface mount modules and are suitable for defense, space, and commercial applications.
Download Datasheet Product Details
RF Amplifier
100 W Pulsed/CW Solid-State Power Amplifier from 1 to 10 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2073ADB-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 1 to 6 GHz (Band A) and 6 to 10 GHz (Band B). It delivers a CW/Pulsed output power of more than 100 W with a gain of more than 50 dB. This Class A/AB linear amplifier requires less than 15 ms to switch between the frequency bands.
Download Datasheet Product Details
RF Switch
UltraCMOS SP4T Reflective Switch from 9 kHz to 45 GHz
RF Switch  from pSemi, A Murata Company

The PE42546 from pSemi is an UltraCMOS SP4T Reflective switch that operates from 9 kHz to 45 GHz. It has a switching time of 60 ns, an insertion loss of less than 3.1 dB, and provides more than 39 dB of isolation. The switch is based on UltraCMOS technology making it a high-performance alternative to the incumbent gallium arsenide (GaAs) technology.
Download Datasheet Product Details
Sponsored by Mouser
 
 
Limiter
2.5 W Schottky Diode Signal Limiter from DC to 40 GHz
Limiter  from Marki Microwave

The HLM-40PSM from Marki Microwave is a GaAs Schottky Diode Signal Limiter that operates from DC to 40 GHz. It has an insertion loss of less than 1.75 dB and a flat leakage from 11 to 19 dBm. This limiter can handle a peak input power of 9.5 W and average input power of 2.5 W. It is ideal for protecting sensitive components and for applications requiring high linearity.
Download Datasheet Product Details
RF Amplifier
10 W Pulsed/CW Solid-State Power Amplifier System from 1 to 18 GHz
RF Amplifier  from SUNGSAN

The SA1062 from Sungsan is a Solid-State Power Amplifier System that operates from 1 to 6 GHz (Band A) and 6 to 18 GHz (Band B). It delivers a pulsed/CW output power of more than 10 W (40 dBm) with a gain of 40 dB. The amplifier can switch between bands in less than 150 ms. It has spurious levels of better than -60 dBc and harmonics of -20 dBc.
Download Datasheet Product Details
RF Over Fiber Module
5G-Ready Radio-over-Fiber Link Up to 50 GHz
RF Over Fiber Module  from RF SPIN

The Radio-over-Fiber (RoF) link from RF Spin is a radio-optical bridging solution. It enables radio signal transmission in frequency bands up to 50 GHz with minimal distortion and excellent performance. This high-tech and sophisticated system use a modular architecture. It can be used to convert radio signals to optical signals and vice-versa, thus effectively eliminating the difficulties associated with long-distance RF transmission.
Download Datasheet Product Details
RF Switch
Solid-State SPDT Switch from 20 MHz to 8 GHz
RF Switch  from JFW Industries

The 50S-2143 from JFW Industries is an Absorptive SPDT Solid-State Switch that operates from 20 MHz to 8 GHz. This self-isolating switch can handle an input power of up to 0.4 W (26 dBm) and has an insertion loss of less than 3 dB. It has a switching speed of less than 10 µs and provides more than 50 dB of isolation. The switch requires a DC supply of 5 V and consumes 10 mA of current.
Download Datasheet Product Details
RF Amplifier
11 dB Gain Block MMIC from DC to 12 GHz
RF Amplifier  from Guerrilla RF

The GRF3012 from Guerrilla RF is a Gain Block that operates from DC to 12 GHz. It provides a gain of 11 dB, has a noise figure of 5 dB and a P1dB of 5 dBm. This gain block is based on an InGaP HBT process and is internally matched to 50-ohms at the input and output ports. It requires a DC supply of 9 V and draws 22 mA of current.
Download Datasheet Product Details
RF Module
Wi-Fi and Bluetooth Combo Module for Industrial Automation Applications
RF Module  from Telit Communications

The WE310F5 Series from Telit are a fully integrated, single-band Wi-Fi and Bluetooth modules designed for industrial automation, energy management, building automation, and data logger applications. The modules support Wi-Fi (802.11 b/g/n) and Bluetooth Low Energy (BLE5) at 2.4 GHz.
Download Datasheet Product Details
Cellular IoT Module
LTE-M / NB-IoT Module with Integrated GNSS Receiver
Cellular IoT Module  from u-blox AG

The SARA-R510M8S from u-blox is an LTE-M / NB-IoT Module that has an integrated u-blox M8 GNSS receiver for multi-regional use. Based on u-blox's UBX-R5 cellular chipset, it provides multi-band, multi-regional IoT coverage that complies with the 3GPP Rel. 14 standard. It requires a DC supply from 3 - 4.5 V and supports UART, USB, DDC, USIM, and GPIO interfaces.
Download Datasheet Product Details
Power Divider
300 W Low-PIM Power Splitters from 555 to 6000 MHz
Power Divider  from Radio Frequency Systems

The PDS-4 Series from Radio Frequency Systems are Power Splitters that operate from 555 to 6000 MHz. They are available in 2-way, 3-way, and 4-way configurations and can even split and distribute wireless signals with minimal reflections or loss. The splitters can handle an input power of 300 W and have an insertion loss of less than 1.45 dB.
Download Datasheet Product Details
RF Over Fiber Module
RF Over Fiber Link from 10 MHz to 6 GHz
RF Over Fiber Module  from Vialite Communications

The Mil-Aero Link Pair from Vialite is an RF over Fiber Link for P, L, S, and C-Band combined applications with standard and high gain options from 10 MHz to 6 GHz. The Mil-Aero RF over fiber link pair is optimized for use in Mil-Aero applications such as Boresight and Air Force Base communications and Signals Intelligence (SIGINT).
Download Datasheet Product Details
RF Transistor
15 W GaN HEMT from DC to 6 GHz
RF Transistor  from United Monolithic Semiconductors

The CHK8101-SYC from United Monolithic Semiconductors is an Unmatched High Electron Mobility Transistor (HEMT) that operates from DC to 6 GHz. It delivers an output power of more than 15 W with a small signal gain of 19 dB and power added efficiency of 64%. The transistor is developed using 0.5 µm gate length GaN HEMT technology and requires external matching circuitry.
Download Datasheet Product Details
Waveguide Tee
4-Port Waveguide Magic Tee from 50 to 75 GHz
Waveguide Tee  from A-Info

The 15WMT_Cu from A-Info is a Magic Tee that operates from 50 to 75 GHz. It can handle an input power of 30 W, has an insertion loss of less than 2 dB, and provides more than 30 dB of isolation. This four-port magic tee can be used as a power combiner or divider based on the given requirements. It has an H-plane VSWR 1.40:1 and an E-plane VSWR 1.60:1.
Download Datasheet Product Details
Antenna
9-in-1 Cellular and GNSS Antenna from 617 to 3600 MHz
Antenna  from Taoglas

The MA9909.A.002 from Taoglas is a 9-in-1 Cellular and GNSS Antenna that operates from 617 to 3600 MHz covering multiple worldwide 4G LTE, 5G, and GNSS bands. It has 8 linearly-polarized 4G/5G cellular MIMO elements and an RHCP-polarized GNSS element that supports GPS, GLONASS, and Galileo constellations.
Download Datasheet Product Details
RFID Tag
On-Metal RFID Tag for High-Temperature Applications
RFID Tag  from Confidex Ltd

The Heatwave Tough™ from Confidex is an RFID Tag with high-temperature resistance and good performance on metallic surfaces. It uses an NXP UCODE  7xm+™ IC and provides a read range of up to 9 m on metal and up to 2 m on plastic. This tag has a 448-bit EPC, 96-bit TID, 384-bit digital signature, and a user memory of 2048 bits.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]