PREV 24 March, 2022 NEXT

SATELLITE 2022 Coverage

24 March, 2022 Newsletter - everything RF

SATELLITE 2022 event coverage. View it in your browser

 
SATELLITE 2022 Coverage
Date: 24 March, 2022
 
Sponsored by Planar Monolithics Industries
 
 
Latest SATELLITE 2022 News
News
ThinKom Introduces Ka-Band Phased Array Satellite Antenna for Communications-On-the-Move

ThinKom

News
R&S Introduces Multipurpose Channel Satellite Receiver for Software Defined Radio Applications

Rohde & Schwarz

News
Calian Introduces Advanced Spectrum Monitoring & Signal Analysis System

Calian

News
Isotropic Systems Unveils New Multi-Link Ground Satellite Terminal for Defense Applications

Isotropic Systems

News
SWISSto12 to Develop Next-Gen Ka-Band Active Antennas for Fully-Reconfigurable Digital Payloads

Thales

News
Cobham SATCOM Unveils Multi-Orbit Tactical Antenna Terminals for LEO, MEO and GEO Constellations

Cobham SATCOM

News
QuadSAT Successfully Completes Drone-Based Testing of a 15 meter Antenna

QuadSAT

News
Mission Microwave Introduces 400 W Ka Band Solid State Power Amplifier for Satellite Gateways

Mission Microwave

News
Cobham Selects CPI to Supply Ka-band Amplifiers for Gateway Tracking Antenna Systems

CPI

News
Intellian Technologies Unveils Phased Array Flat Panel Antenna Terminals at SATELLITE 2022

Intellian

Sponsored by Planar Monolithics Industries
 
 
Products at SATELLITE 2022
Satellite Link Emulator
Multi-Channel Satellite Link Emulator
Satellite Link Emulator  from Square Peg Communications Inc

The RLS-2100 from Square Peg Communications is a comprehensive satellite channel simulator with unparalleled impairment simulation, real-time multi-satellite orbit calculation, full-motion support and integrated GPS simulators. It can provide end-to-end or single link simulation of wideband terrestrial and satellite networks, satellite selection via open standard interfaces, and facilities to enable seamless integration into more complex testbeds if required. It supports the highest bandwidth and has an intuitive, user-friendly interface.
Download Datasheet Product Details
Satellite Link Emulator
Advanced Satellite Link Emulator with 1 to 4 Channels
Satellite Link Emulator  from dBm Corporation

The ACE9600 from dBm Corp is an Advanced Channel Emulator that operates from 825 to 1425 MHz. It is a powerful hardware/DSP based test platform that allows a variety of impairments to be inserted in real-time, enabling testing of a range of wireless receivers, UHF/VHF Radios, satellite payloads and satellite fixed & mobile ground and airborne transceivers in a controlled laboratory environment.
Download Datasheet Product Details
RF Cable Assembly
110 GHz Highly-Flexible Cable Assembly
RF Cable Assembly  from Huber+Suhner

The NANOBEND™ from HUBER+SUHNER is a Highly-Flexible Cable Assembly that operates from DC to 110 GHz. It has been designed for use in low profile, internal, point-to-point interconnections between RF modules and communication systems. This cable assembly is extremely flexible and can even be bent where the cable and connector meet, without compromising on signal strength or stability.
Download Datasheet Product Details
RF Cable Assembly
Semi-Rigid Phase Stable Cables Assemblies for High Radiation Environments
RF Cable Assembly  from Times Microwave Systems

The SiO2 cable assemblies from Times Microwave have been developed for the toughest interconnect applications. They have a stainless steel outer jacket with a copper outer conductor and a low density, high purity Silicon Dioxide dielectric. This results in excellent phase versus temperature and loss versus temperature performance and excellent repeatability of these characteristics from lot to lot.
Download Datasheet Product Details
SATCOM Amplifier System
1:2 Low-Noise Amplifier Redundant Plate System from 7.25 to 7.75 GHz
SATCOM Amplifier System  from AmpliTech

The APT-LNA-PLATE-XBAND from AmpliTech is a 1:2 Low-Noise Amplifier Redundant Plate System that operates from 7.25 to 7.75 GHz. It can simultaneously amplify two X-Band small signals for IF down-conversion and demodulation. The LNA System is configured for dual channel operation using two independent AmpliTech low noise amplifiers, with a common redundant (independent) low noise amplifier that can be remotely switched into operation on either channel using (customer supplied) 24 V DC redundancy control.
Download Datasheet Product Details
RF Amplifier
E-Band mmWave Power Amplifiers from 71-76/81-86 GHz
RF Amplifier  from Filtronic

The Cerus 8 from Filtronic is a power amplifier that operates in the E-Band from 71 to 76 GHz (AA021) and 81 to 86 GHz (AA022). It is designed using GaAs MMICs that are performance-matched and efficiently combined in a waveguide to deliver maximum power. The amplifier delivers a saturated output power of more than 28 dBm with a small signal gain of 24 dB. It supports 256-QAM modulation and is available in an 8-Way configuration (1-Way and 4-Way configurations also available).
Download Datasheet Product Details
RF Amplifier
10 W Space-Qualified GaN Power Amplifier MMIC from 17 to 20.5 GHz
RF Amplifier  from Arralis

The K-HPA10W-1721-SM from Arralis is a Power Amplifier MMIC that operates in the K-band from 17 to 20.5 GHz. It delivers a saturated output power of more than 10 W with a large signal gain of 20 dB and has a PAE of 25%. This amplifier is fabricated on a space-qualified 0.25 µm GaN-on-SiC process and is integrated with DC blocking capacitors on RF ports.
Download Datasheet Product Details
RF Over Fiber Module
Rugged RF Over Fiber Transceiver from 3.4 to 8.4 GHz
RF Over Fiber Module  from Emcore

The MAKO-X from EMCORE is a C/X-Band RF Over Fiber Transceiver that operates from 3.4 to 8.4 GHz and is designed for high-speed fiber optics communication applications. The transceiver uses two fiber cores and combines C/X band transmitter and receiver capability in a single highly ruggedized package that is tested to MIL-STD-810G & MIL-STD-461F standards.
Download Datasheet Product Details
Block Up Converter
40 W GaN-Based BUC/SSPA from 29 to 31 GHz
Block Up Converter  from TTI

The Dual GaN Ka BUC from TTI is a GaN-Based BUC/SSPA that converts an input frequency from 1-2 GHz to an output frequency from 29-31 GHz. It delivers an output power of up to 40 W (46 dBm) with a gain of over 70 dB. It has a phase noise of -93 dBc/Hz @ 100 kHz offset and spurious levels off better than -60 dBc. The BUC can be controlled via RS-485, Ethernet, and USB interfaces.
Download Datasheet Product Details
SATCOM Amplifier System
750 W Ku-Band TWT Power Amplifier from 13.75 to 14.8 GHz
SATCOM Amplifier System  from Spacepath Communications

The STA5375 Ku Series of High Power Amplifiers from SpacePath Communications operates from 12.75 - 14.80 GHz with bandwidth options of 500/750 MHz. They provide ultra-linear, high-efficiency performance in a compact, lightweight, rugged, weatherproof, antenna mount enclosure. The advanced packaging and cooling techniques enable the unit to operate in extreme environmental conditions from direct rain to direct sunlight. The amplifiers have a user-friendly and incorporate a comprehensive remote control facility as standard, including RS485, RS232 and Ethernet options.
Download Datasheet Product Details
Rubidium Oscillator
10 MHz Rubidium Oscillator for Telecom and Defense Applications
Rubidium Oscillator  from Orolia

The Spectratime LPFRS from Orolia is a Rubidium Oscillator that operates at a frequency of 10 MHz. It provides a sine wave output with a phase noise of -140 dBc/Hz at 10 kHz and has a short-term stability of 2 x 10-12 /100s. The oscillator has spurious levels of less than -80 dBc and harmonics of under -25 dBc. It requires a DC supply of 18-32 V.
Download Datasheet Product Details
RF Transceiver
100 MHz to 18 GHz Transceiver for Military Applications
RF Transceiver  from Planar Monolithics Industries

The PTRAN-100M18G-SDLVA-SFB-3UVPX-10HP-MAH-MX from PMI RF is a Transceiver that operates from 100 MHz to 18 GHz. On the Tx side, it up-converts a signal from 0.1-4 GHz to 2-18 GHz and on the Rx side, it down-converts an RF signal from 0.1-18 GHz to an IF signal from 0.1-4 GHz for analog to digital conversion. The transceiver has a receive filter bank that incorporates a 2-way absorptive switch to select an input, along with two 6-way switches allowing one of the six filter paths to be chosen.
Download Datasheet Product Details
Band Pass Filter
LTCC Bandpass Filter from 27.5 to 30 GHz
Band Pass Filter  from Mini Circuits

The BFCQ-2872+ from Mini-Circuits is an LTCC bandpass filter with a passband frequency from 27.5 to 30 GHz. This miniature filter has high repeatability of performance by utilizing a proprietary LTCC material system and distributed filter topology. It has an insertion loss of 1.2 dB with stopband rejection of 37 dB up to 55 GHz.
Download Datasheet Product Details
RF Spectrum Analyzer
High-Performance RF Spectrum and Signal Analyzer
RF Spectrum Analyzer  from Calian

The Decimator D4 from Calian is an RF Spectrum and Signal Analyzer that is designed for users with advanced spectrum monitoring and signal analysis requirements. It is available in Multiport, PCIe Card and Portable form factors and remotely monitors RF communications and detects signal issues. It is ideal for monitoring RF feeds and carriers in satellite, wired and terrestrial wireless networks.
Download Datasheet Product Details
Phase Noise Analyzer
10 MHz to 26 GHz Real-Time Phase Noise Analyzer
Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. The analyzer is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability.
Download Datasheet Product Details
SATCOM Antenna
30 cm Airborne VSAT Terminal from 10.95 to 14.5 GHz
SATCOM Antenna  from Orbit Communication Systems

The MPT 30 Ku from Orbit is a Multi-Purpose Airborne Terminal designed to deliver high-quality broadband communications via satellite. Built to fulfill the “anytime, anywhere” coverage requirements of the military and government airborne satcom markets, MPT supports Ku, Ka and X frequency bands.
Download Datasheet Product Details
SATCOM Antenna
Ka-Band Phased Array Antenna for Commercial/Military Applications
SATCOM Antenna  from ThinKom

The Ka500 from ThinKom is a Phased Array Antenna that operates in the Ka-band from 27.5 to 30 GHz (Tx band) and 17.7 to 20.2 GHz (Rx band). It supports GSO (Geostationary Satellites) and NGSO (Non-Geostationary Satellites) and delivers compact efficiency, network flexibility and reliability to any mobile application.
Download Datasheet Product Details
RF Switch
Solid-State SP8T RF Switch from 20 MHz to 8 GHz
RF Switch  from JFW Industries

The 50S-2145 SMA from JFW Industries is an Absorptive SP8T Solid-State Switch that operates from 20 to 8000 MHz. It has a switching speed of less than 10µs and provides isolation of more than 55 dB. The switch can handle an input power of up to 0.63W (28 dBm) and has an insertion loss of less than 4.5 dB. It requires a DC supply of +5 V and consumes less than 2.7 mA of current.
Download Datasheet Product Details
Related White Papers & Articles
Software defined Radio Use Case for Satellite Industry - Per Vices
THE SPACE RACE TO LEO and Impact to Future Communication - EM Research
Modulation Techniques for Satellite Communications - Keysight Technologies
Time to Step-up to mmWave to Unlock Potential of LEO Satellites for Global Data Connectivity - Filtronic
SATELLITE COMMUNICATION SERVICES: An Integral Part of the 5G Ecosystem - ESOA
More Whitepapers
Event Coverage
Event Image
SATELLITE 2022
Date: 21 to 24 March, 2022
Location: Walter E. Washington Convention Center, Washington, DC
More Events
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. This newsletter provides event coverage of the SATELLITE 2022 event that is taking place in Washington DC this week.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]