1. everything RF
  2. RF Newsletters
more
PREV 30 March, 2022 NEXT

New RF and Microwave Products this Week

30 March, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 30 March, 2022
 
Sponsored by IMS 2022
 
 
New RF and Microwave Products this Week
Switched Filter Bank
Sub-Octave Switch Filter Bank from 2 MHz to 8 GHz
Switched Filter Bank  from ATEK MIDAS

The ATEK950P6 from ATEK MIDAS is a Sub-Octave Switch Filter Bank that operates from 2 to 8000 MHz. It consists of an SP8T switch followed by 7 fixed frequency bandpass filters which are then followed by another SP8T switch. Each SP8T switch is used to send the input/output signals to 2 pins. This allows users to bypass the filter bank off-chip if required.
Download Datasheet Product Details
Front End Module
2.4 GHz Wi-Fi 6 Front End Module
Front End Module  from Skyworks Solutions

The SKY85354-11 from Skyworks is a 2.4 GHz Wi-Fi 6 Front End Module. It includes a single-pole double-throw (SPDT) Tx/Rx switch, a low-noise amplifier (LNA) with bypass, and a power amplifier (PA) with an integrated digital pre-distortion (DPD) coupler. The FEM provides a Tx gain of 31 dB and an Rx gain of 15 dB.
Download Datasheet Product Details
RF Amplifier
Discrete GaAs pHEMT Transistor from DC to 20 GHz
RF Amplifier  from Qorvo

The QPD2025D from Qorvo is a discrete GaAs Transistor that operates from DC to 20 GHz. This transistor delivers a saturated output power of 24 dBm with a gain of 14 dB and has a power-added efficiency (PAE) of 58%. It is designed using a 0.25 µm power pHEMT production process and has a protective overcoat layer with silicon nitride that provides a level of environmental robustness and scratch protection.
Download Datasheet Product Details
RF Spectrum Analyzer
Military-Grade Real-Time Spectrum Analyzer from 10 MHz to 6 GHz
RF Spectrum Analyzer  from Aaronia AG

The SPECTRAN V6 XFR PRO from Aaronia is a Military Certified Real-Time Spectrum Analyzer that operates from 10 MHz to 6 GHz (8 GHz option also available). It provides up to 245 MHz (I/Q) of real-time bandwidth and can sweep the complete band in less than 5 ms (1 THz/s). The analyzer is designed for frequency monitoring and for detecting, analyzing, and recording unknown and illegal signal transmissions.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-Time Handheld Analyzer from 9 kHz to 8 GHz
RF Spectrum Analyzer  from Narda Safety Test Solutions

The SignalShark from Narda Safety Test Solutions is a Real-Time Handheld Spectrum Analyzer that operates from 9 kHz to 8 GHz. It can be used for a number of applications like making wideband measurements of an entire frequency range, detecting hidden signals, reliably capturing very short impulses, or localizing interference signals.
Download Datasheet Product Details
RF Variable Attenuator
Assembly with 24 Attenuators from 200 to 6000 MHz
RF Variable Attenuator  from JFW Industries

The 50PA-1197 from JFW Industries is a Solid-state Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It consists of 24 solid-state step attenuators, each with an attenuation range from 0-95 dB with 1 dB steps. The attenuators have an insertion loss of less than 8.8 dB and a typical switching speed of 4 microseconds.
Download Datasheet Product Details
Down Converter
50 GHz Heterodyne Downconversion System for Phase Noise Measurements
Down Converter  from Holzworth Instrumentation

The HA7063A from Holzworth is a Heterodyne Downconversion System that can accept an input RF signal from 10 MHz to 50 GHz. It downconverts the signal to DC to 40 MHz (with HA7062C) and DC to 100 MHz (with HA7062D). The system can be used for both absolute and residual (additive) measurements to 50 GHz, making it one of the only solutions available on the market for taking accurate additive phase noise measurements at frequencies greater than 18 GHz, without using external mixers.
Download Datasheet Product Details
RF Connector
Micro-Coaxial Receptacle Connector from DC to 15 GHz
RF Connector  from Electric Connector Technology

The 81802911-1 from Electric Connector Technology is a 2-port micro-coaxial receptacle connector for high-density RF circuits that can be used up to 15 GHz. It has a unique “shielded” dual-port design that helps reduce the leakage on RF connectors which can effectively limit the crosstalk between RF and digital signals, and suppress the radiated spurious emission from the signal paths.
Download Datasheet Product Details
RF Amplifier
300 W Pulsed/CW Solid-State Power Amplifier from 6 to 18 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2065B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers a CW/Pulsed saturated output power of more than 300 W with 55 dB of gain. This Class A/AB linear amplifier provides excellent performance when compared to TWT’s and is equipped with built-in protection circuits with extensive monitoring for forward/reflected power in Watts & dBm, VSWR, voltage, current, and temperature.
Download Datasheet Product Details
RF Over Fiber Module
Rugged RF Over Fiber Transceiver from 3.4 to 8.4 GHz
RF Over Fiber Module  from Emcore

The MAKO-X from EMCORE is a C/X-Band RF Over Fiber Transceiver that operates from 3.4 to 8.4 GHz and is designed for high-speed fiber optics communication applications. The transceiver uses two fiber cores and combines C/X band transmitter and receiver capability in a single highly ruggedized package that is tested to MIL-STD-810G & MIL-STD-461F standards.
Download Datasheet Product Details
RF Cable Assembly
Semi-Rigid Phase Stable Cables Assemblies for Harsh Environments
RF Cable Assembly  from Times Microwave Systems

The SiO2 cable assemblies from Times Microwave have been developed for the toughest interconnect applications. They have a stainless steel outer jacket with a copper outer conductor and a low density, high purity Silicon Dioxide dielectric. The use of advanced equipment and materials has resulted in the production of a low loss, high-velocity dielectric with consistent properties from run to run.
Download Datasheet Product Details
RF Switch
SPDT PIN Diode Absorptive Switch from 100 MHz to 20 GHz
RF Switch  from Amplical Corporation

The SW2A101 from Amplical is an SPDT PIN Diode Absorptive Switch that operates from 100 MHz to 20 GHz. This Coaxial switch can handle an input CW power of up to 2 watts, has an insertion loss of less than 3.8 dB, isolation of more than 70 dB, and a switching speed of up to 75 ns. It is ideal for use in communications systems, electronic simulators, bypass/selector switch, radar systems, EW systems, and test equipment applications.
Download Datasheet Product Details
RF Amplifier
10 W CW/Pulsed GaN Power Amplifier from 9 to 11 GHz
RF Amplifier  from Altum RF

The ARF1009Q5 from Altum RF is a GaN Power Amplifier that operates in the X-band from 9 to 11 GHz. It delivers a saturated output power of 10 W with a power gain of 30 dB and has a power-added efficiency (PAE) of 40% for CW/Pulsed operations. The amplifier requires a DC supply of 22 V and requires a bias current of 150 mA.
Download Datasheet Product Details
Cellular Module
Multi-Mode LTE Cat 1 Modules with Worldwide Roaming
Cellular Module  from u-blox AG

The LENA-R8 Series from u-blox AG are LTE Cat 1 Modules that support global LTE FDD, LTE TDD, and 2G bands. They deliver a downlink data rate of 10 Mbit/s and an uplink data rate of 5 Mbit/s. These modules have integrated support for u-blox‘s MQTT Anywhere, MQTT Flex services, AssistNow, and CellLocate services.
Download Datasheet Product Details
V2X Module
5G-NR Automotive Module for Global Use Outside China
V2X Module  from ALPS ALPINE

The UMNZ1 from Alps Alpine is a 5G-NR Module that is designed for automotive applications. It is backward compatible with 2G GSM, 3G WCDMA, and 4G LTE and supports 3GPP Release 15-compliant C-V2X features. This module can be used in combination with V2X systems and provides the capability to communicate and interact with everything around vehicles such as road infrastructure, other vehicles, and pedestrians.
Download Datasheet Product Details
Directional Coupler
10 dB Directional Coupler from 0.6 to 40 GHz
Directional Coupler  from Marki Microwave

The CE10-0R640 from Marki microwave is a Directional Coupler that operates from 0.6 to 40 GHz. This 10 dB coupler has a coupling variation of ±0.8 dB, a directivity of 24 dB, and an insertion loss of less than 2.3 dB. It is available in a module that measures 5.10 x 0.69 x 0.50 inches with 2.92 mm (female) connectors. The coupler is coated with conductive paint to reduce EMI/RFI leakage and susceptibility.
Download Datasheet Product Details
Power Divider
2-Way Resistive Power Divider from DC to 40 GHz
Power Divider  from Knowles

The PDR06380 from Knowles Devices is a 2-Way Resistive Power Divider that operates from DC to 40 GHz. The divider has an insertion loss of less than 1 dB and return loss of more than 25 dB. It is available in a flip-chip surface-mount package that measures 1.905 x 1.65 x 0.254 mm and is suitable for use in test & measurement and optical applications.
Download Datasheet Product Details
SATCOM Antenna
30 cm Airborne VSAT Terminal from 10.95 to 14.5 GHz
SATCOM Antenna  from Orbit Communication Systems

The MPT 30 Ku from Orbit is a Multi-Purpose Airborne Terminal designed to deliver high-quality broadband communications via satellite. Built to fulfill the “anytime, anywhere” coverage requirements of the military and government airborne satcom markets, MPT supports Ku, Ka and X frequency bands.
Download Datasheet Product Details
RF Spectrum Analyzer
High-Performance RF Spectrum and Signal Analyzer
RF Spectrum Analyzer  from Calian

The Decimator D4 from Calian is an RF Spectrum and Signal Analyzer that is designed for users with advanced spectrum monitoring and signal analysis requirements. It is available in Multiport, PCIe Card and Portable form factors and remotely monitors RF communications and detects signal issues. The Decimator D4 can measure and display the cross-polarization isolation of remote SATCOM and VSAT terminals.
Download Datasheet Product Details
Block Up Converter
40 W GaN-Based BUC/SSPA from 29 to 31 GHz
Block Up Converter  from TTI

The Dual GaN Ka BUC from TTI is a GaN-Based BUC/SSPA that converts an input frequency from 1-2 GHz to an output frequency from 29-31 GHz. It delivers an output power of up to 40 W (46 dBm) with a gain of over 70 dB. It has a phase noise of -93 dBc/Hz @ 100 kHz offset and spurious levels off better than -60 dBc. The BUC can be controlled via RS-485, Ethernet, and USB interfaces.
Download Datasheet Product Details
SATCOM Amplifier System
750 W Ku-Band TWT Power Amplifier for Satellite Applications
SATCOM Amplifier System  from Spacepath Communications

The STA5375 Ku Series of High Power Amplifiers from SpacePath Communications operate from 12.75 - 14.80 GHz with bandwidth options of 500/750 MHz. They provide ultra-linear, high-efficiency performance in a compact, lightweight, rugged, weatherproof, antenna mount enclosure. The advanced packaging and cooling techniques enable the unit to operate in extreme environmental conditions from direct rain to direct sunlight.
Download Datasheet Product Details
Signal Generator
USB-Powered Signal Generator from 20 MHz to 7 GHz
Signal Generator  from DS Instruments

The SG6000PRO from DS Instruments is a Portable/Benchtop RF Signal Generator that operates from 20 MHz to 7 GHz. It delivers an output power of up to 15 dBm that can be adjusted in 0.25 dB steps or can be continuously changed using its internal variable attenuator. It requires a DC supply of 5 V and is powered through a standard USB-C port.
Download Datasheet Product Details
Base Station Antenna
Short-Haul Point-to-Point Antenna from 71 to 86 GHz
Base Station Antenna  from Radio Frequency Systems

The SC1-W800AU from RFS is a Point-to-Point Antenna that operates from 71 to 86 GHz. This antenna has a single polarization, provides 45.2 dBi of gain, and has a VSWR of less than 1.5:1. It has a 3 dB beamwidth of 0.7 degrees and a front-to-back ratio of 66 dB. The antenna is available in an enclosure with a light hardcover radome that measures 387 (Dia.) x 187 (H) mm and a simplified mounting design for fast installation.
Download Datasheet Product Details
RF Amplifier
Bi-Directional Amplifiers from 150 to 174 MHz for Public Safety Applications
RF Amplifier  from Westell Technologies

The CS40-Series from Westell are VHF Bi-Directional Amplifiers (BDAs) that operate from 150 to 174 MHz. They deliver an output power of up to 1 W with a gain of 85 dB and support 4-port simplex and duplex operation. These Class A/B BDAs include 16 filters per band (Class A) with individual filter bandwidths from 12.5 to 75 KHz.
Download Datasheet Product Details
Sponsored by IMS 2022
 
 
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]