1. everything RF
  2. RF Newsletters
more
PREV 27 April, 2022 NEXT

New RF and Microwave Products this Week

27 April, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 27 April, 2022
 
Sponsored by IMS 2022
 
 
New RF and Microwave Products this Week
RF Amplifier
Low Noise Monolithic Amplifier from 50 MHz to 10 GHz
RF Amplifier  from Mini Circuits

The PMA3-14LN+ from Mini Circuits is a Low Noise Monolithic Amplifier that operates from 50 MHz to 10 GHz. It provides more than 20 dB of gain with a low noise figure of 2.1 dB and an input and output return loss of 20 dB. The amplifier requires a single DC supply voltage of 6 V and is matched to 50 ohms.
Download Datasheet Product Details
RF Amplifier
15 kW S-Band Transmitter System from 2.7 to 3.1 GHz for Radar Applications
RF Amplifier  from RFHIC

The RRT273115K-690 from RFHIC is an S-Band Transmitter System that operates from 2700 to 3100 MHz. It delivers an output power of 15 kW, has a duty cycle of 10%, and a VSWR of 2:1. The transmitter is designed with a fault redundant structure allowing the transmitter to provide graceful degradation in case of an amplifier failure.
Download Datasheet Product Details
RF Amplifier
Connectorized RF Amplifier from 0.01 to 6 GHz
RF Amplifier  from Teledyne Microwave Solutions

The A3CP6025 from Teledyne Microwave Solutions is a Thin-Film Amplifier that operates from 0.01 to 6 GHz. It provides a small signal gain of more than 20 dB, has a noise figure of less than 6.5 dB and a P1dB up to 25 dBm. The amplifier draws less than 350 mA of current. It is available in a standard connectorized three-stage CougarPak™ package.
Download Datasheet Product Details
Signal Generator
Modular Frequency Synthesizer from 160 MHz to 40 GHz
Signal Generator  from SignalCore

The SC5521A from SignalCore is a Modular Frequency Synthesizer that can generate a signal from 160 MHz to 40 GHz with a resolution of 1 Hz. It can generate signals with a low phase noise of -136 dBc/Hz at 100 kHz offset. The device has a switching speed of less than 750 µs and a VSWR of less than 2.8:1. It requires a DC supply voltage from 10 to 15 V and consumes up to 24 watts of power.
Download Datasheet Product Details
GNSS Module
Rugged Multi-Constellation, Dual-Antenna GNSS Receiver
GNSS Module  from Septentrio

The AsteRx-U3 from Septentrio is a Multi-constellation, Dual-Antenna GNSS Receiver. It can track signals from GPS, GLONASS, Galileo, BeiDou, NavIC, and QZSS GNSS constellations on both antennas with centimeter-level accuracy. The receiver uses LOCK+ technology that maintains tracking during heavy vibrations and IONO+ to ensure position accuracy even during periods of elevated ionospheric activity.
Download Datasheet Product Details
Software Defined Radio
Software Defined Radio (SDR) Transceiver from 30 kHz to 54 MHz
Software Defined Radio  from Flex Radio

The FLEX-6400M from Flex Radio is a Software Defined Radio (SDR) Transceiver that operates from 30 kHz to 54 MHz. It has 2 independent band/mode receivers and supports full-duplex cross-band operation. This transceiver has a dynamic range of more than 155 dB and a direct sampling rate of 122.88 Msps.
Download Datasheet Product Details
Power Divider
4-Way Resistive Power Divider/Combiner from DC to 7.2 GHz
Power Divider  from JFW Industries

The 50PD-870 from JFW Industries is a 4-Way Resistive Power Divider/Combiner that operates from DC to 7.2 GHz. It can handle an average input power of up to 1 W, has an insertion loss of less than 13 dB, and has a VSWR of less than 1.75:1. This resistive divider has a star configuration and the functionality of an RF hub because every path through the divider/combiner has an equal loss.
Download Datasheet Product Details
Termination
100 W Termination from 0.380 to 2.7 GHz
Termination  from MECA

The LPTC100-4310F from MECA is a Coaxial Termination that operates from 0.380 to 2.7 GHz. It is matched to 50 ohms and can handle up to 100 Watts of average power and 5 kW of peak power. The termination has PIM values as low as -155 dBc and can handle full rated power to 85 degrees C without power de-rating.
Download Datasheet Product Details
RF Inductor
Square Air Core Inductors from 5.5 to 19.4 nH
RF Inductor  from Coilcraft

The 0806SQ Series from Coilcraft are Square Air Core Inductors with inductance values from 5.5 to 19.4 nH. They have Q-factors of up to 90, DC resistance of less than 10 mOhm and can handle an RMS current of 2.9 A. These inductors have a flat top and bottom for reliable pick and place and mechanical stability.
Download Datasheet Product Details
RF Capacitor
100 nF Single Layer Capacitor for DC Blocking/RF Bypassing
RF Capacitor  from Knowles

The V80 Series of Single Layer Capacitors from Knowles Precision Devices has a capacitance value of 100 nF. They have been designed for DC blocking or RF bypass applications in a broad frequency range. These high frequency, wire bondable capacitors are ideal for GaN and GaAs amplifier applications where small size and microwave performance are key to a well-performing circuit.
Download Datasheet Product Details
Sponsored by IMS 2022
 
 
Wireless SoC
2x2 Dual-Band Wi-Fi / Bluetooth 5.0 SoC with MU-MIMO and Tx Beamforming
Wireless SoC  from Qualcomm

The QCA9379 from Qualcomm is a 2x2 Dual-Band Wi-Fi (802.11a/b/g/n/ac) / Bluetooth 5.0 SoC with MU-MIMO and Tx Beamforming capabilities in a single-chip. It supports enhanced Wi-Fi/Bluetooth co-existence for IoT applications with a dedicated antenna for Bluetooth transmission. It requires a DC supply of 3.3 V and supports WLAN, PCIe, SDIO, PCM, HS-UART, and USB interfaces.
Download Datasheet Product Details
Front End Module
Wi-Fi 802.11ax Front End Module from 5.15 to 5.95 GHz
Front End Module  from Qorvo

The QPF4516B from Qorvo is a Wi-Fi 802.11ax Front-End Module that operates from 5.15 to 5.95 GHz. It consists of a 5 GHz power amplifier (PA), regulator, single pole two throw switch (SP2T), logarithmic power detector, and a bypassable low noise amplifier (LNA). The module provides an Rx gain of 15 dB and a rejection of 30 dB for the 2.4 GHz band in the Rx path.
Download Datasheet Product Details
EMC Immunity Test System
Four-Tone EMC Immunity Test System from 80 MHz to 6 GHz
EMC Immunity Test System  from AR RF/Microwave Instrumentation

The MT4IEC10V3M from AR RF/Microwave Instrumentation is an EMC Immunity Test System that operates from 80 MHz to 6 GHz. It has four internal signal generators that can generate four simultaneous test frequencies which can reduce the sweep time by 74%. It includes two RF amplifiers that provide an output power of more than 125 W.
Download Datasheet Product Details
Vector Network Analyzer
2-Port Compact USB VNA from 300 kHz to 1.3 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The TR1300/1 from Copper Mountain Technologies is a 2-Port lab-grade vector network analyzer that operates from 300 kHz to 1.3 GHz. This compact computer-controlled VNA has a dynamic range of 130 dB and can measure up to 100,001 measurement points. It can be used for a wide range of applications including RF component design and testing, on-wafer probing, field testing, insertion loss measurement, distance to fault measurements, antenna matching, quality control, material measurements, and many others.
Download Datasheet Product Details
Frequency Synthesizer
YIG Based Multi-Channel RF Signal Synthesizers from 10 MHz to 40 GHz
Frequency Synthesizer  from Holzworth Instrumentation

The HSY Series from Holzworth are YIG-based RF Signal Synthesizers that operate from 10 MHz to 3/6/12/24/40 GHz. They are available in 1, 2, 3 or 4 channel options, with each channel having an accurate dynamic range from -110 to +20 dBm. The synthesizers provide a frequency step size of 0.001 Hz, have a phase offset resolution of 0.1º, and a switching speed of less than 10 ms.
Download Datasheet Product Details
Band Pass Filter
Bandpass Filter MMIC with Passband from 17.52 to 21.45 GHz
Band Pass Filter  from AmpliTech

The AGM-011 from AmpliTech is a GaAs Bandpass Filter MMIC with a passband from 17.52 to 21.45 GHz. It has a passband insertion loss of less than 3.8 dB and provides a rejection of 30 dB at 12.58 and 27.77 GHz. The filter is available in a package that measures 1.00 x 0.75 x 0.10 mm and is suitable for use in communication systems, point-to-point radios, fiber optics, test equipment, and military & space applications.
Download Datasheet Product Details
RF Amplifier
Low Noise Amplifier from 2400 to 2600 MHz
RF Amplifier  from Amplifier Solutions Corporation

The ASC3064C from Amplifier Solutions Corporation is a Low Noise Amplifier that operates from 2400 to 2600 MHz. It provides a P1dB of 18 dBm with 50 dB of gain. This amplifier has a noise figure of 1.5 dB and provides reverse isolation of 60 dB. It requires a DC supply of 12 V and consumes less than 220 mA of current.
Download Datasheet Product Details
RF Shielded Test Enclosure
12 GHz Portable RF Shielded Test Enclosure
RF Shielded Test Enclosure  from RF Electronics

The HDRF-3579-A from RF Electronics is a Portable RF Shielded Test Enclosure that operates up to 12 GHz. It is designed for testing WLAN & wireless devices and has a temperature chamber or environmental test chamber which is specially designed for V-T testing. The shield box has thick RF absorbing foam within it that deadens standing waves and reflections.
Download Datasheet Product Details
RF Amplifier
2 kW Solid-State Amplifier from 80 to 1000 MHz
RF Amplifier  from Exodus Advanced Communications

The AMP2121-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 80 to 1000 MHz. It delivers a CW/Pulsed output power of 2 kW with more than 63 dB of gain. This Class A/AB amplifier uses an advanced design to provide linear performance. It is equipped with in-built protection circuits and includes monitoring parameters for forward/reflected power in dBm and Watts, VSWR, as well as voltage, current and temperature sensing for optimum reliability and ruggedness.
Download Datasheet Product Details
Phase Noise Analyzer
Digital Phase Noise and Frequency Analyzer from 2 to 400 MHz
Phase Noise Analyzer  from Noise XT

The DNA from Noise XT is a Digital Phase Noise and Frequency Analyzer that operates from 2 to 400 MHz. It has a fractional frequency noise chronogram and built-in oscillators for advanced autonomous operation. This analyzer has a unique digital architecture and state-of-the-art close-in phase noise performance with a limitation set by the user’s reference clock. It can measure Allan variance, overlapped Allan Variance, Hadamar variance and overlapped Hadamar variance.
Download Datasheet Product Details
RF Cable
High-Frequency Phase Stable Cable Assembly
RF Cable  from Times Microwave Systems

The PF402 from Times Microwave Systems is an RF Cable Assembly with a cut-off frequency of 38.4 GHz and has been designed for applications that require minimal phase change over temperature. It has a diameter of 0.160 inches with a minimum bend radius of 0.75 inches and provides shielding of 90 dB/foot.
Download Datasheet Product Details
RF Cable Assembly
Flexible Phase-Stable Cable Assemblies from DC to 70 GHz
RF Cable Assembly  from Rosenberger

The RFlex Series from Rosenberger are flexible Phase-Matched Cable Assemblies that operate from DC to 70 GHz. The cable provides more than 100 dB of shielding and uses a unique over-molded strain relief material that provides exceptional ruggedness and durability. The assemblies are available with SMA, 3.5 mm, 2.92 mm, WSMP, 1.85 mm, and mini SMP connectors.
Download Datasheet Product Details
RF Amplifier
Ultra-Low Noise Amplifier MMIC from 0.15 to 6 GHz
RF Amplifier  from MACOM

The MAAL-011207-Q from MACOM is a Low Noise Amplifier MMIC that operates from 0.15 to 6 GHz. It provides 21 to 25 dB of gain with a noise figure of less than 0.7 dB and P1dB of over 17.5 dBm. This amplifier has an OIP3 of 33 dBm and requires a supply voltage of 6 V with current consumption of less than 80 mA.
Download Datasheet Product Details
Low Noise Block
Multiband PLL Low-Noise Block from 17.3 to 22.3 GHz
Low Noise Block  from Swedish Microwave AB

The Multiband PLL LNB from Swedish Microwave is a Low-Noise Block with an RF from 17.3 to 22.3 GHz and output IF frequency from 950 to 2000 MHz. It provides more than 55 dB of gain with a noise figure of 1.7 dB. This LNB provides image rejection of more than 20 dB and has a phase noise of -95 dBc/Hz @ 100 kHz offset.
Download Datasheet Product Details
Power Divider
Automotive-Grade GNSS Signal Splitter from 1100 to 1700 MHz
Power Divider  from Tallysman Wireless

The TW162A from Tallysman is an active Signal Splitter that operates from 1100 to 1700 MHz. It can be used to connect one antenna to two receivers and supports GPS, QZSS, GLONASS, BeiDou, Galileo, NavIC, and L-Band correction services. This signal splitter provides a gain of up to 1 dB and has a noise figure of less than 4 dB. It has an amplitude balance of 0.1 dB with a phase balance of 2°.
Download Datasheet Product Details
Antenna
3G/4G/5G Surface-Mount Cellular Antenna from 617 to 3800 MHz
Antenna  from Antenova

The SR4L069 from Antenova is a Cellular Antenna that operates in the 3G, 4G, and 5G bands from 617 to 3800 MHz. This linearly polarized antenna provides a peak gain of 5.5 dBi and has a VSWR of less than 3.5:1. It is internally matched to 50 ohms and has an average efficiency of up to 65%. This cellular antenna is available in a surface-mount package that measures 45.0 × 10.0 × 3.3 mm.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]