1. everything RF
  2. RF Newsletters
more
PREV 18 May, 2022 NEXT

New RF and Microwave Products this Week

18 May, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 18 May, 2022
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week
Spectrum Analyzer Extender
Frequency Extension Modules for Signal and Spectrum Analyzers
Spectrum Analyzer Extender  from Farran

The SAE Series from Farran are Frequency Extension Modules for Spectrum Analyzers. These frequency extension modules easily connect to the spectrum or signal analyzer and extend their measurement range up to 170 GHz. They use high-performance full-band mixers with integrated LO multiplier chains and are compatible with a number of Keysight and Rohde & Schwarz spectrum and signal analyzers.
Download Datasheet Product Details
Data Link
High-Power Dual-MIMO Radio System from 1350 to 1500 MHz
Data Link  from Triad RF Systems

The THPR1039 from Triad RF Systems is a Dual MIMO Radio System that operates in the L-Band from 1350 to 1500 MHz. It delivers an output of 10 W (5 W per channel) and achieves an RF link range of more than 50 km when used in both ground and air radio segments. This radio combines a DTC Solo8 MIMO radio, high power amplification, and custom filtering into a single, easy-to-integrate package.
Download Datasheet Product Details
Balun
Broadband RF Balun from 500 kHz to 100 GHz
Balun  from HYPERLABS

The HL9409 from Hyperlabs is an RF Balun that operates from 500 kHz to 100 GHz. It can handle an input power of up to 1 W (30 dBm) and has an insertion loss of 6.5 dB. This 50-ohm balun has an amplitude balance of ±0.5 dB and a phase balance of ±15° at 80 GHz. It is available in a surface-mount package that measures 50.0 × 35.6 × 10.2 mm.
Download Datasheet Product Details
RF Mixer
Surface-Mount Triple-Balanced Mixer from 0.01 to 6 GHz
RF Mixer  from Teledyne Microwave Solutions

The MTS6018 from Teledyne Microwave Solutions is a Triple-Balanced Mixer with LO/RF frequency from 0.01 to 6 GHz and an IF frequency from 0.001 to 3 GHz. It has a conversion loss of 7 dB and provides an LO to RF isolation of 30 dB. This mixer is available in a surface-mount package that measures 12.95 x 9.78 x 4.3 mm.
Download Datasheet Product Details
Beamforming IC
8-Channel Beamforming Front-End IC from 26.5 to 29.5 GHz
Beamforming IC  from pSemi, A Murata Company

The PE188200 from pSemi is an 8-Channel Beamforming Front-End IC that operates in the 5G n257 band from 26.5 to 29.5 GHz. It has two independently controllable RF chains of four channels supporting four dual-polarity antennas or eight single-polarity antennas. This beamforming IC has integrated power amplifiers, low-noise amplifiers, splitter/combiners, 6-bit phase/attenuation control, and phase & amplitude beamformers.
Download Datasheet Product Details
Beamforming IC
4-Channel Analog Beamforming IC for 5G Applications from 26.5 to 29.5 GHz
Beamforming IC  from NXP Semiconductors

The MMW9002KC from NXP is a 4-Channel Bidirectional Analog Beamforming IC that operates from 26.5 to 29.5 GHz. Both the Tx and Rx chains of this 5G Beamforming IC have a phase shifter and a variable gain amplifier (VGA). It provides a Tx P1dB of 19 dBm with a gain of 30.5 dB and an Rx gain of 25 dB. This beamforming IC can be controlled via an SPI interface.
Download Datasheet Product Details
Sponsored by Mouser
Amphenol RF
5G wireless connectivity
Amphenol RF 5G Wireless Connectors, adapters, and cable assemblies ensure high data rates for low-latency applications. Amphenol RF offers low PIM products, including HD-EFI, N-Type, PSMP, SMP, SMPM, 2.2/5, 4.3/10, and 7/16 connector series, as well as cable assemblies and adapters. Click here to learn more.
RF Amplifier
65 W CW/Pulsed GaN HEMT Amplifier from DC to 3.5 GHz
RF Amplifier  from MACOM

The MAPC-A1100 from MACOM is a GaN-on-SiC HEMT Amplifier that operates from DC to 3.5 GHz. It delivers a CW/pulsed output power of 65 W (48.1 dBm) with a power gain of 15.1 dB and has a drain efficiency of up to 70.5%. This internally pre-matched amplifier requires a DC supply of 28/50 V. It is available in a flanged air ceramic package and is ideal for military radio communications.
Download Datasheet Product Details
RF Amplifier
12 W Ka-Band Power Amplifier from 32 to 38 GHz
RF Amplifier  from ERZIA

The ERZ-HPA-3200-3800-40-E from ERZIA is a Power Amplifier that operates in the Ka-Band from 32 to 38 GHz. It delivers a saturated output power of up to 41 dBm (~12 W) with a small signal gain of 49 dB. This amplifier requires a DC supply of 24 V and consumes 80 W of power. It is available in a compact through-hole package with 2.92 mm (female) I/O connectors.
Download Datasheet Product Details
Microwave Generator
30 kW Solid State (GaN) Microwave Generator from 900 to 930 MHz
Microwave Generator  from RFHIC

The RIK0930K-40TG from RFHIC is a gallium-nitride (GaN) Solid-State industrial microwave generator system that provides continuous wave (CW) and or pulse output power adjustable from 1 kW to 30 kW at frequencies adjustable from 900 MHz to 930 MHz. This microwave generator is a turn-key solution that comes pre-equipped with sixteen state-of-the-art gallium-nitride (GaN) on silicon-carbide (SiC) solid-state power amplifiers.
Download Datasheet Product Details
RF Amplifier
Waveguide Low Noise Amplifier from 55 to 96 GHz
RF Amplifier  from Low Noise Factory

The LNF-LNR55_96WA_SV from Low Noise Factory is a Low Noise Amplifier that operates from 55 to 96 GHz. It provides a gain of 27 dB with a noise figure of 2.86 dB and has a noise temperature of 280 K. This MMIC LNA has been built on InP HEMT technology which ensures reliable and excellent unit-to-unit results. It requires a DC supply of 5 V and consumes 40 mA of current.
Download Datasheet Product Details
RF Amplifier
Rugged Low Noise Amplifier from 1 to 18 GHz
RF Amplifier  from AmpliTech

The APTMP4-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. It provides more than 35 dB of gain with a noise figure of less than 1.5 dB and a P1dB of 20 dBm. The LNA is fabricated using state-of-the-art PHEMT technology and is MIL-883 and MIL-45208 certified. It has internal DC regulators which allow DC supply from 11 to 24 V and consumes less than 350 mA of current.
Download Datasheet Product Details
RF Inductor
Rugged, Surface Mount Broadband Conical Inductors
RF Inductor  from Coilcraft

The BCR Series are conical inductors available in nine inductance values ranging from 0.22 to 8.0 uH. They have been designed specifically for broadband and high-frequency applications from 10 MHz to 40 GHz. The inductors are ideal for use in ultra-wideband bias tees, where the conical inductor provides the path for the DC bias injection or extraction while isolating the power source from the active device.
Download Datasheet Product Details
Sponsored by Mouser
 
 
GPS/GNSS Disciplined Oscillator
10 MHz OCXO with with Extended Holdover Stability
GPS/GNSS Disciplined Oscillator  from IQD Frequency Products

The IQCM-200 from IQD Frequency Products is an OCXO that operates at a frequency of 10 MHz and is designed to provide exceptional holdover stability and accuracy. It provides an HCMOS output waveform with a phase noise of -150 dBc/Hz @ 100 kHz offset. The oscillator has a rise and fall time of less than 8 ns, a duty cycle of 45/55% and a minimum pulse width of 10 µs.
Download Datasheet Product Details
Fixed Attenuator
40 dB Fixed Attenuator from DC to 18 GHz
Fixed Attenuator  from MECA

The 631-40-1F18 from MECA is a Fixed Attenuator that operates from DC to 18 GHz. This 40 dB attenuator can handle an average input power of up to 20 W and a peak input power of 500 W. It is available in an aluminum alloy body that measures 2.33 (H) x 1.5 (Dia.) inches and has SMA male/female connectors.
Download Datasheet Product Details
RF Cable
50-Ohm Coaxial, Triaxial Cables for Aerospace Applications
RF Cable  from GIGAFLIGHT Connectivity

The GIGALite™ Series from GIGAFLIGHT are 50-ohm Coaxial and Triaxial Cables. These flexible and lightweight cables are designed specifically for use in aircrafts and other harsh environments. They exhibit low loss and provide excellent protection against EMI. These cables are used in many major avionic / aircraft / aerospace systems and meet FAA flammability requirements.
Download Datasheet Product Details
Termination
IP67-Rated Resistive Termination from DC to 6 GHz
Termination  from Microlab

The TB-640ME from Microlab is a Resistive 50-Ohm Termination that operates from DC to 6 GHz. It can handle an average input power of 40 W and a peak input power of 3 kW. This termination is available in an IP67-rated package that measures 5.47 x 1.54 x 1.46 inches with 4.3-10 (female) connector.
Download Datasheet Product Details
Power Divider
2-Way Power Divider/Combiner from 0.4 to 6 GHz
Power Divider  from JFW Industries

The 50PD-836 from JFW Industries is a reactive 2-Way Power Divider that operates from 0.4 to 6 GHz. It can handle an input power of 10 W (as a divider) and 0.25 W (as a combiner). The divider/combiner has an insertion loss of less than 1.1 dB and provides more than 15 dB of isolation. It has a phase balance of ±5° and an amplitude balance of ±0.35dB.
Download Datasheet Product Details
Power Divider
2-Way Power Divider/Combiner from 1500 to 8000 MHz
Power Divider  from Polaris

The PPS-2-8000-30-S from Polaris is a 2-Way Power Divider/Combiner that operates from 1500 to 8000 MHz. It can handle an input power of up to 30 W as a splitter and 1 W as a combiner. This power splitter provides an isolation of 22 dB and has an insertion loss of less than 3.8 dB. It has a phase unbalance of 1° and an amplitude unbalance of 0.1 dB.
Download Datasheet Product Details
SATCOM Antenna
Ka-Band Phased Array Antenna Terminal for Commercial/Military Applications
SATCOM Antenna  from ThinKom

The Ka500 from ThinKom is a Phased Array Antenna Terminal that operates in the Ka-band from 27.5 to 30 GHz (Tx band) and 17.7 to 20.2 GHz (Rx band). It supports GSO (Geostationary Satellites) and NGSO (Non-Geostationary Satellites) and delivers compact efficiency, network flexibility and reliability to any mobile application. The antenna has switchable polarization and supports data rates up to 200 Mbps.
Download Datasheet Product Details
Block Up Converter
32 W GaN SATCOM Block-Up Converter from 30 to 31 GHz
Block Up Converter  from Comtech Xicom Technology

The Bobcat 32Ka from Comtech Xicom Technology is a SATCOM Block Upconverter that converts an input frequency (IF) from 1000 – 2000 MHz to an output frequency (RF) from 30.0 – 31.0 GHz. It is also available in a dual-band configuration with output frequencies of 29-30 GHz/30-31 GHz. This BUC delivers a saturated output power of 32 W with a small signal gain of 55 dB and gain adjustment of 25 dB in 0.1 dB steps.
Download Datasheet Product Details
Block Up Converter
100 W GaN Block Upconverter from 27.5 to 31 GHz
Block Up Converter  from Actox

The ABD100UKA from Actox is a Block Upconverter that converts an input frequency from 950 – 1950 MHz to an output frequency from 27.5 – 31 GHz. It delivers an output power of more than 100 W with 72 dB of gain. The BUC is based on GaN technology which enables high efficiency, low power consumption and high reliability.
Download Datasheet Product Details
GPS/GNSS Antenna
Triple-Band Helical Antenna with Support for L-Band Correction Services
GPS/GNSS Antenna  from Tallysman Wireless

The HC977XF from Tallysman is an Embedded Triple-Band Helical Antenna and supports L-Band correction services. It has a pre-filter which is followed by a low-noise amplifier that provides 35 dB of gain. The antenna implements Tallysman’s eXtended Filter (XF) antenna technology that has been designed to mitigate out-of-band signals and prevent GNSS antenna saturation.
Download Datasheet Product Details
Base Station Antenna
4×4 MIMO Panel Antenna for Stadiums from 1695 to 3800 MHz
Base Station Antenna  from Alpha Wireless

The AW3873-T0-F from Alpha Wireless is an 8-Port Panel Antenna that operates from 1695 – 2170 MHz and 3400 – 3800 MHz. This ±45° slant linearly polarized antenna provides 10 dB of gain and has a VSWR of less than 1.5:1. It has azimuth and elevation beamwidths of 50° with a front-to-back ratio of more than 28 dB.
Download Datasheet Product Details
Antenna
Flexible PCB Antenna from 863-870/902-928 MHz for LoRa Applications
Antenna  from Antenova

The SRFI065 from Antenova is a Flexible PCB Antenna that operates in the ISM and LoRa bands of 863-870 MHz and 902-928 MHz. This linearly polarized antenna provides a peak gain of 1.33 dBi with an average efficiency of 52%. It has a return loss of 15 dB and a VSWR of less than 1.5:1. The antenna is available in an FPC self-adhesive 3M package that measures 35.00 x 10.00 x 0.15 mm.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, white papers, upcoming events, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]