1. everything RF
  2. RF Newsletters
more
PREV 25 May, 2022 NEXT

New RF and Microwave Products this Week

25 May, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 25 May, 2022
 
Sponsored by IMS 2022
 
 
New RF and Microwave Products this Week
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 18 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The R180 from CMT is a handheld 1-Port VNA that provides lab-grade performance from 1 MHz to 18 GHz. This 1-Port VNA (Cable and Antenna Analyzer) can connect directly to the DUT, as a result of which it has excellent measurement accuracy by eliminating the practical limitation of test cables. The R180 can be controlled and powered through a USB-C port or through an external 5 VDC power supply.
Download Datasheet Product Details
RF Amplifier
600 W CW/Pulsed Solid-State Power Amplifier from 6 to 18 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2065E-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 6 to 18 GHz. It delivers 600 W of output power with more than 57 dB of gain. This Class A/AB SSPA has built-in protection circuits and provides extensive monitoring parameters. It is ideal for broadband EMI/RFI, lab, and communication applications.
Download Datasheet Product Details
RF Amplifier
5000 W Solid State Power Amplifier from 10 kHz to 225 MHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 5000A225B from AR RF/Microwave Instrumentation is a Solid State Power Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled, broadband amplifier when used with a sweep generator provides 5000 W of output power with a gain of over 67 dB. All amplifier control functions and status indications can also be viewed/controlled remotely using the GPIB/IEEE-488 format, RS-232, fiber optics, USB, and Ethernet.
Download Datasheet Product Details
RF Amplifier
550 W LDMOS Solid-State Power Amplifier that Operates at 70 MHz
RF Amplifier  from LEANFA Srl

The LEANAMP-70M-500-M from Leanfa is a Solid-State Power Amplifier that operates at 70 MHz. This amplifier can deliver a CW output power of up to 550 W with a gain of 45 dB and has a power efficiency of 70%. This power amplifier is based on LDMOS technology and integrates a low-pass filter that allows effective rejection of the output harmonics to ensure high spectral purity at all operating power levels. It has been developed for Industrial applications.
Download Datasheet Product Details
Cellular IoT Module
Release-13 Compliant LTE-M/NB-IoT Cellular Module
Cellular IoT Module  from Wurth Elektronik

The Adrastea-I from Würth Elektronik is an LTE-M/NB-IoT Cellular Module that is compliant with 3GPP Release 13 specifications and upgradeable to Release 14. It has multi-band support and can be operated through one of two (LTE-M and NB-IoT) cellular communication technologies which enable the support for international, multi-regional coverage.
Download Datasheet Product Details
RF Module
Wi-Fi 6, Bluetooth 5.2, and 802.15.4 Modules for IoT Applications
RF Module  from u-blox AG

The MAYA-W2 Series from u-blox are Wi-Fi 6, Bluetooth 5.2, and 802.15.4 Modules that are designed for IoT applications. They provide SISO Wi-Fi 6 operation with data throughput of up to 600 Mbit/s (Wi-Fi 6) and support MU-MIMO to provide exceptional performance even in dense Wi-Fi environments.
Download Datasheet Product Details
Cellular Module
5G NR Sub-6 GHz + C-V2X Modules for Automotive Applications
Cellular Module  from Quectel

The AG55xQ Series from Quectel are 5G NR Sub-6 GHz + C-V2X Modules that are designed for automotive applications. They adopt 3GPP Rel-15 technology and support both 5G NR NSA and SA modes. These modules are based on the AEC-Q100 qualified Qualcomm SA515M chipset and deliver a downlink data rate of up to 2.4 Gbps (5G NSA), 1.6 Gbps (LTE-A), and an uplink data rate of up to 550 Mbps (5G NSA), 200 Mbps (LTE-A).
Download Datasheet Product Details
Cellular Module
5G-NR Sub-6 GHz Cellular Module for Global Connectivity
Cellular Module  from Sierra Wireless

The EM9291 from Sierra Wireless is a 5G-NR Sub-6 GHz Cellular Module with 4G LTE and 3G fallback support. It delivers a peak download data rate of 4.9 Gbps and an upload data rate of 660 Mbps. This module has an embedded SIM for simplified & flexible IoT deployments with onboard carrier profile, M2M eUICC, and consumer eUICC.
Download Datasheet Product Details
Sponsored by IMS 2022
 
 
TCXO
50 to 150 MHz Low G-sensitivity, Vibration Resistant TCXOs
TCXO  from Dynamic Engineers

The TCXO914BTLG Series of from Dynamic Engineers are low G-sensitivity, vibration resistant TCXOs that operate from 50 to 150 MHz. These TCXOs provide a Sine Output waveform with high-frequency stability of ±0.5 ppm from -40°C to +85°C and have a low phase noise. They are available in a compact package that measures 14 x 9 x 6.7 mm.
Download Datasheet Product Details
Horn Antenna
Double Ridged Waveguide Horn Antenna from 1 to 18 GHz
Horn Antenna  from RF SPIN

The DRH18-E from RF Spin is a wide band, high gain, microwave horn antenna that operates from 1 GHz to 18 GHz. It provides a gain of 6 dBi. This Dual Ridge Horn Antenna has been specially developed for EMC/EMI Applications based on 13 years of experience from the older model. The DRH18-E is supplied with VSWR, Gain and Antenna Factor calibration data at 3 meters.
Download Datasheet Product Details
Fixed Attenuator
10 dB Fixed Attenuator from 698 MHz to 2.7 GHz
Fixed Attenuator  from MECA

The LPA100-10-16WWP from MECA is a Fixed Attenuator that operates from 0.698 to 2.7 GHz. It provides an attenuation of 10 dB with an attenuation accuracy of ±1.3 dB. This attenuator can handle an average input power of up to 100 W and a peak input power of 1.5 kW. It is available in an IP67-rated module that measures 11.10 x 4.75 x 3.38 inches with 4.3/10 (male/female) connectors.
Download Datasheet Product Details
Power Divider
50 W 2-Way Power Divider from 0.5 to 6 GHz for 5G Applications
Power Divider  from Werbel Microwave

The D-2065-N from Werbel Microwave is a 2-Way Power Divider that operates from 500 MHz to 6 GHz. It can handle an input power of up to 50 W, provides isolation of more than 16 dB, and has an insertion loss of less than 1.1 dB. This power divider has an amplitude balance of 0.2 dB and a phase balance of 2°. It is available in a ROHS-compliant module that measures 3.25 x 2.46 x 0.75 inches with N-type connectors and is suitable for 5G deployment.
Download Datasheet Product Details
Software
Radar Simulation Software
Software  from Remcom

WaveFarer® is a high fidelity radar simulator that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz. Applications include simulation of automotive drive scenarios, indoor sensors, and far-field radar cross-section (RCS).
Download Datasheet Product Details
RF Shielded Test Enclosure
RF Shielded Test Enclosure from 20 MHz to 6 GHz
RF Shielded Test Enclosure  from RF Electronics

The HDRF-2349 from RF Electronics is an RF Shielded Test Enclosure that operates from 20 MHz to 6 GHz. This shielded box has a single chamber design that allows parallel testing of multiple DUTs. The interior of this enclosure measures  1100 mm (W) X 800 mm (H) X 490 (D). It uses thick RF absorbing foam that provides an isolation of more than 120 dB @ 3 GHz.
Download Datasheet Product Details
Down Converter
Microwave Down-converters from 0.5 to 18 GHz
Down Converter  from Mercury Systems

The RFX-3100 Series from Mercury Systems are Microwave Down-converters that convert an input frequency from 0.5 - 18 GHz to an output frequency from 1 - 1.5 GHz. These converters have a tuning resolution of 10 kHz and provide up to 30 dB of gain in 1 dB steps. They provide an image rejection of more than 60 dB and have spurious levels better than -70 dBm.
Download Datasheet Product Details
Antenna
Sinuous Antenna from 2 to 18 GHz for Military Aircrafts
Antenna  from Cobham Advanced Electronic Solutions

The 8506674-501 from CAES is a Microwave-Band Sinuous Antenna that operates from 2 to 18 GHz. Sinuous Antennas provide RF performance similar to comparably-sized planar spiral antennas, while also supporting reception of multiple signal polarization. This dual-circular polarized antenna provides a gain of 0 dBi and has a VSWR of less than 3:1.
Download Datasheet Product Details
Sponsored by IMS 2022
 
 
Diplexer
Ceramic Diplexer for L1/L2 GNSS Bands
Diplexer  from Skyworks Solutions

The TT49778E-TR from Skyworks Solutions is a Ceramic Diplexer that operates in L1-L2 GNSS bands at 1227/1575 MHz. It can handle a CW input power of up to 2 W and has an insertion loss of 2.0 dB. This diplexer has a bandwidth of 16 MHz and provides out-of-band rejection of 20 dB. It is available in an RoHS compliant surface-mount package that measures 0.40 x 0.44 x 0.12 inches.
Download Datasheet Product Details
RF Connector
Surface-Mount Solderless PCB Connectors from DC to 65 GHz
RF Connector  from SV Microwave

The LiteTouch Solderless PCB Connectors from SV Microwave are Coaxial/Surface mount PCB connectors that operate from DC to 65 GHz. They have a dielectric withstanding voltage of 500 V(RMS) and support 500 mating cycles. These connectors are designed for precision thin substrate mounting and maintain a solderless connection while keeping the board material intact to avoid undesirable results on thin (< .010”) dielectric PCB.
Download Datasheet Product Details
Waveguide Isolator
1 W Waveguide Isolator from 7.5 to 8.3 GHz for LEO/GEO Missions
Waveguide Isolator  from Smiths Interconnect

The 15HD363 from Smith Interconnect is a Low-Power Isolator that operates in the X-band from 7.5 to 8.3 GHz. It can handle a CW input power of 1 W, provides isolation of more than 23 dB, and has an insertion loss of less than 0.12 dB. This isolator is available in a module with a WR112 waveguide interface and is suitable for use in receiver applications for LEO and GEO missions.
Download Datasheet Product Details
RF Amplifier
Connectorized/Surface-Mount Low Noise Amplifier from 6 to 18 GHz
RF Amplifier  from Planar Monolithic Industries

The PE2-45-6G18G-4R5-24-12-SFF from Planar Monolithic Industries is a Low-Noise Amplifier that operates from 6.0 to 18.0 GHz. This amplifier provides a gain of up to 47 dB with a noise figure of 4.5 dB and has an output P1dB of more than 24 dBm. It requires a DC supply from 12-15 V and consumes 600 mA of current.
Download Datasheet Product Details
RF Detector
High-Frequency Threshold Detector from 0.01 to 20 GHz
RF Detector  from Teledyne Microwave Solutions

The DTCP18001 from Teledyne Microwave Solutions is an RF Threshold Detector that operates from 10 MHz to 20 GHz. It has an input power range from -30 dBm to -5 dBm with a flatness of ±1.0 dB and a VSWR of less than 2:1. This detector offers an externally adjustable threshold level with a fast response time, low drift and has an insensitive threshold level in response to an applied voltage.
Download Datasheet Product Details
90 Degree Hybrid Coupler
90° Hybrid Coupler from 1700 to 2300 MHz
90 Degree Hybrid Coupler  from TTM Technologies

The X4C20J1-03G from Anaren is a 90° Hybrid Coupler that operates from 1700 to 2300 MHz. This 3 dB coupler can handle a CW input power of 5 W, provides more than 20 dB of isolation and has an insertion loss of less than 0.5 dB. It has a phase balance of 90° and an amplitude balance of ±0.5 dB.
Download Datasheet Product Details
Block Up Converter
100 W Ka-Band GaN Block Up-Converters from 27.5 to 31 GHz
Block Up Converter  from ACORDE

The ACTX-Ka100W-Ex-V3 from Acorde are Ka-Band BUCs that up-convert an input frequency from 950 – 1200 MHz to an output frequency from 27.5 – 31.0 GHz. They deliver a saturated output power of 50.0 dBm (~100 W) with more than 65 dB of gain. These BUCs are based on a high power GaN design to provide high efficiency in harsh environmental conditions with every single unit fully tested in an environmental chamber.
Download Datasheet Product Details
RF Amplifier
Low Noise Gain Block from 0.4 to 4.2 GHz
RF Amplifier  from Guerrilla RF

The GRF4012W from Guerrilla RF is a Low Noise Gain Block that operates from 0.4 to 4.2 GHz. It provides a gain of 17.8 dB, has a noise figure of 0.9 dB, and a P1dB of 21 dBm. This gain block requires a DC supply from 1.8 to 5 V and consumes less than 80 mA of current. It is available in a compact DFN-6 package that measures 1.5 x 1.5 mm.
Download Datasheet Product Details
RF Cable
Vapor-Sealed Cable Assemblies from DC to 40 GHz for Airborne Applications
RF Cable  from W. L. Gore & Associates

The 7 Series from W. L. Gore & Associates are Microwave/RF Cable Assemblies that operate from DC to 40 GHz. They have an insertion loss of less than 2.56 dB/m and a nominal time delay of 1.2 ns/cm. These cable assemblies are qualified for aerospace applications and meet the MIL-T-81490 mechanical and environmental requirements for airframe cables.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]