1. everything RF
  2. RF Newsletters
more
PREV 1 June, 2022 NEXT

New RF and Microwave Products this Week

1 June, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 1 June, 2022
 
Sponsored by Signal Hound
 
 
New RF and Microwave Products this Week
RF Mixer
Multi-Octave Microwave Mixer from 4 to 20 GHz
RF Mixer  from HASCO Components

The HM3001 from HASCO is a multi-octave Microwave Mixer with an RF/LO frequency from 4 to 20 GHz and an IF frequency from DC to 3 GHz. It has a conversion loss of less than 8.5 dB, and provides LO to RF isolation of 30 dB and LO to IF isolation of 25 dB. This mixer can handle an input power of up to 20 dBm and has an LO drive level from 7 to 12 dBm.
Download Datasheet Product Details
RF Variable Attenuator
4-Bit Silicon Digital Attenuator from 10 MHz to 60 GHz
RF Variable Attenuator  from Analog Devices

The ADRF5474 from Analog Devices is a 4-Bit Silicon Digital Attenuator that operates from 10 MHz to 60 GHz. It provides an attenuation of 22 dB in 2 dB steps with an accuracy of ±0.40 dB. This attenuator can handle an input power of up to 24 dBm and has an insertion loss of less than 4 dB. It requires a dual DC supply of +3.3 and -3.3 V and has parallel mode control with CMOS/LVTTL compatible controls.
Download Datasheet Product Details
Antenna
360° Stackable Patch Antenna for 5G-NR Applications from 24 to 29.5 GHz
Antenna  from KREEMO

The P360°16 from Kreemo is a Stackable Patch Antenna that operates from 24 to 29.5 GHz. It has two 4x4 antenna elements stacked one on top of another and provides a peak gain of 16 dBi. This dual-polarized antenna provides a 360° coverage (6 directions) and supports MU-MIMO. Kreemo’s SPA (Stackable Patch Antenna) technology is a cost-effective 5G small cell solution that significantly improves indoor 5G coverage while maintaining a small size and low power consumption.
Download Datasheet Product Details
RF Amplifier
Low-Noise Amplifier from 0.5 to 6 GHz for Wireless Infrastructure Applications
RF Amplifier  from Qorvo

The QPL9058 from Qorvo is a Low Noise Amplifier that operates from 500 to 6000 MHz. It provides a gain of 18 dB with a noise figure of less than 0.95 dB and has a P1dB of 20.6 dBm. The amplifier provides high linearity with an adjustable bias and requires only a minimal number of external components to operate. It requires a single DC supply from 3.3 to 5 V and consumes 54 mA of current.
Download Datasheet Product Details
Digital Phase Shifter
6-Bit Digital Phase Shifter MMIC from 0.9 to 1.3 GHz
Digital Phase Shifter  from SuperApex Corporation

The SAC3301B from SuperApex Corporation is a GaAs 6-Bit Digital Phase Shifter MMIC that operates from 0.9 to 1.3 GHz. It provides 360° of phase coverage with an LSB of 5.62° and phase accuracy of ±2°. This phase shifter has a VSWR of 1.3:1 and an insertion loss of 4.5 dB. It is available in a package that measures 3.74 x 1.25 x 0.10 mm.
Download Datasheet Product Details
RF Module
Wi-Fi 6 + Bluetooth 5.2 Module for IoT Applications
RF Module  from Murata

The Type 1XL from Murata is a Wi-Fi 6 + Bluetooth 5.2 Module that operates at 2.4 and 5 GHz. It delivers a data rate of up to 1200 Mbps with Wi-Fi and up to 2 Mbps for Bluetooth. This module is based on the NXP 88W9098 combo chipset and supports Wi-Fi 802.11a/b/g/n/ac/ax 2×2 MU-MIMO and Bluetooth BR/EDR/LE specifications.
Download Datasheet Product Details
Sponsored by Signal Hound
BB60C
In the Lab or on the Move, the BB60C Delivers
Our new LTE and RF mapping features in Spike add EVEN MORE value to your BB60C RF analyzer. Spike is perfect for LTE and cellular network coverage and much more. Get the portable, lightweight BB60C at an unrivaled value of $3,160, Spike included. Click here to learn more.
TCVCXO
Voltage Controlled TCXO from 10 to 52 MHz
TCVCXO  from Dynamic Engineers

The TCXO5302BM Series from Dynamic Engineers are High Precision Voltage Controlled TCXOs that operate from 10 to 52 MHz. They have a frequency stability of 0.1 ppm and phase noise of -154 dBc/Hz at 10 kHz. The TCXOs require a supply voltage of 2.5/3.3 V and provide a CMOS, clipped sinewave output.
Download Datasheet Product Details
RF Amplifier
1 kW Solid-State Power Amplifier from 80 to 1000 MHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 1000W1000G from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 80 to 1000 MHz. When used with a sweep generator, it delivers a CW output power of more than 1000 W with a gain of 60 dB. This amplifier is protected from RF input overdrive by an RF input leveling circuit which controls the RF input level to the RF amplifier's first stage when the RF input level is increased above 0 dBm.
Download Datasheet Product Details
Integrated Microwave Assembly
5G Open-Radio Unit for O-RAN Deployments
Integrated Microwave Assembly  from AmpliTech

The A1001-RU-1 from AmpliTech is a 5G Open-Radio Unit (O-RU) for sub-6 GHz deployment from 2.496 to 2.69 GHz and 3.4 to 4.0 GHz. It utilizes GaN power amplifiers along with 64 phased array elements for digital beamforming. This O-RU is available in a surface-mount package. It is ideal for use in high & low-speed networks, IoT deployment, 5G backhaul deployment, and small cell deployment applications.
Download Datasheet Product Details
GNSS Anti-Jamming Solution
GPS Anti-Jam Solution for SWaP-C Constrained Military Applications
GNSS Anti-Jamming Solution  from Mayflower Communications

The NavGuard® 720 (MAGNA-I) from Mayflower Communications is a GPS Anti-Jam Solution. It has a robust RF front-end that handles high-power co-site signals and provides simultaneous (L1 and L2) GPS protection. This system leverages operationally proven MAGNA GPS Anti-Jam solutions which have been used by multiple US Military and Government Agency platforms.
Download Datasheet Product Details
Software Defined Radio
Software-Defined Radio from 2 MHz to 2 GHz for the U.S. Navy
Software Defined Radio  from General Dynamics Mission Systems

The AN/USC-61(C) from General Dynamics is a Software-Defined Digital Modular Radio (DMR) that operates from 2 MHz to 2 GHz. It has four full-duplex channels with multiple waveforms and multi-level information security for voice and data communications from the core of the network to the tactical edge.
Download Datasheet Product Details
RF Variable Attenuator
Assembly with 24 Attenuators from 200 to 6000 MHz
RF Variable Attenuator  from JFW Industries

The 50PA-1197 from JFW Industries is a Solid-state Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It consists of 24 solid-state step attenuators, each with an attenuation range from 0-95 dB with 1 dB steps. The attenuators have an insertion loss of less than 8.8 dB and a typical switching speed of 4 microseconds.
Download Datasheet Product Details
Sponsored by Signal Hound
 
 
RF Cable Assembly
Flexible Cable Assemblies with Multiple Connector Options from DC to 70 GHz
RF Cable Assembly  from Rosenberger

The 70W Series from Rosenberger are Flexible Cable Assemblies that operate from DC to 70 GHz. They are available with 1.85mm, 2.92mm, Mini SMP and WSMP connectors. The frequency range of operation is limited by the type of connector used. An RTK Flex 047 8-inch cable is used by default, however other lengths are also available.
Download Datasheet Product Details
RF Amplifier
4 W Power Amplifier from 4.4 to 5 GHz for 5G NR FR1 band n79 Applications
RF Amplifier  from iCana

The ARQSP4450-4 from iCana is a Power Amplifier that operates from 4.4 to 5 GHz. It delivers a saturated power of 4 W with a power gain of 35 dB and has a power-added efficiency (PAE) of 25%. This DPD-friendly amplifier is designed for 5G-NR FR1 band n79 wireless infrastructure and requires a DC supply of 5 V.
Download Datasheet Product Details
RF Amplifier
300 W GaN Solid-State Power Amplifier from 2 to 20 GHz
RF Amplifier  from Polarity

The P300W2-20CP from Polarity is a Solid-State Power Amplifier that operates from 2 to 20 GHz. It delivers an output power of 300 W with a small signal gain of 62 dB and has a power-added efficiency (PAE) of up to 34%. This SSPA integrates an internal driver amplifier and incorporates high-efficiency GaN MMICs, spatially combined in a compact structure to achieve robust, high-performance power amplification.
Download Datasheet Product Details
RF Amplifier
300 W GaN Solid-State Power Amplifier from 8.5 to 9.6 GHz
RF Amplifier  from TMD

The PTS10224 from TMD Technologies is a Solid-State Power Amplifier that operates in the X-Band from 8500 to 9600 MHz. It delivers more than 300 W of output with a duty cycle of up to 15%. The SSPA employs high-power GaN transistors to achieve excellent power performance in a compact and lightweight form factor.
Product Details
Directional Coupler
10 dB Directional Coupler from 617 to 5925 MHz for 5G Applications
Directional Coupler  from Microlab

The CC-610E from Microlab is a Directional Coupler that operates from 617 to 5925 MHz. It provides nominal coupling of 10 dB with a directivity of more than 17 dB. This coupler can handle an average input power of 300 W and a peak input power of 1 kW. It has a PIM of -161 dBc (tested with 2x +43 dBm) and a VSWR of less than 1.3:1.
Download Datasheet Product Details
Power Divider
4-Way Low PIM Power Splitter from 0.698 – 2.7 GHz
Power Divider  from MECA

The LPR4D-1.700VWWP from MECA is a Low PIM 4-Way Power Splitter that operates from 0.698 to 2.700 GHz. It can handle up to 500 W of input power and has an insertion loss of less than 0.35 dB. This power splitter has a passive intermodulation distortion of -160 dBc with 2x20 W tones in cell and PCS bands. It has an amplitude balance of less than 0.2 dB and a phase balance of better than 3°.
Download Datasheet Product Details
180 Degree Hybrid Coupler
180° Hybrid Coupler from 2.15 to 3 GHz
180 Degree Hybrid Coupler  from Planar Monolithics Industries

The PCH-180-2R15G3G-SFF from Quantic PMI is a 180° Hybrid Coupler that operates from 2.15 to 3 GHz. This 3 dB coupler has an insertion loss of less than 0.4 dB and provides more than 20 dB of isolation. It can handle an average input power of up to 20 W and peak input power of 1 kW. The coupler has an amplitude balance of ±0.3 dB and a phase balance of ±3°.
Download Datasheet Product Details
Horn Antenna
Dual-Polarized Scalar Feed Horn Antenna from 40 to 60 GHz
Horn Antenna  from ERAVANT

The SAF-4036031340-219-S1-188-DP from Eravant is a Scalar Feed Horn Antenna that operates from 40 to 60 GHz. This dual-polarized antenna provides 13 dBi of gain and port isolation of 35 dB between the horizontal and vertical ports. It has a 3 dB beamwidth of 40° for both E and H planes and provides a cross-polarization rejection of 30 dB.
Download Datasheet Product Details
RF & Microwave Circulator
10 W Space-Qualified Circulator from 10.7 to 14.8 GHz
RF & Microwave Circulator  from DiTom Microwave

The DSC1014 from Ditom Microwave is a Space-Qualified Circulator that operates from 10.7 to 14.8 GHz. It can handle an average forward power of 10 W and peak power of 50 W. This circulator has an insertion loss of less than 0.3 dB and provides more than 20 dB of isolation. It is available in a module that measures 0.5 x 0.7 inches and has SMA male/female connectors with a passivated stainless steel finish.
Download Datasheet Product Details
Wireless Charging Transmitter
15 W Wireless Power Transmitter IC with USB Type-C Power Delivery
Wireless Charging Transmitter  from Infineon Technologies

The WLC1115 from Infineon is a Wireless Power Transmitter IC that complies with the latest Qi specification for 15 W applications. It has integrated USB Type-C Power Delivery (PD) and is also compliant with the latest USB Type-C and PD specifications. This IC has integrated gate drivers for the buck and inverter power supplies that are necessary for wireless transmitter applications.
Download Datasheet Product Details
RFID Reader Module
UHF RAIN RFID Module for Battery-Operated Applications
RFID Reader Module  from Jadak

The ThingMagic M7e-Pico from Jadak is a UHF RAIN RFID Module that is designed for battery-operated applications. It is based on the Impinj E310 RAIN RFID reader chip and supports frequencies from 860 to 930 MHz. This module has a read distance of more than 3 m with a read rate of up to 300 tags/second.
Download Datasheet Product Details
RF Repeaters
4G LTE/5G-NR Digital Repeater from 2496 to 2690 MHz
RF Repeaters  from Advanced RF Technologies

The SDRX-43-BTF from Advanced RF Technologies is a 4G (TD-LTE)/5G-NR Digital Repeater that operates from 2496 to 2690 MHz. This repeater is the first carrier-grade high-power system that supports the entire 2.5 GHz BRS spectrum. It provides a system gain from 55 to 95 dB and has a noise figure of less than 5 dB.
Download Datasheet Product Details
Antenna
Sub-6 GHz 5G Cellular/GNSS/Wi-Fi Antenna for IIoT Applications
Antenna  from PCTEL

The Medallion™ II from PCTEL is a Sub-6 GHz 5G Cellular, Wi-Fi and GNSS Antenna for industrial IoT applications. This GNSS multiband antenna includes two 5G FR1 ready ports (including CBRS), and an optional dual-band 2.4/5 GHz port for Wi-Fi coverage. It uses proprietary, built-in GNSS technology that features superior out-of-band rejection filtering for optimal operation with industrial IoT wireless networks.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide users with the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]