1. everything RF
  2. RF Newsletters
more
PREV 6 July, 2022 NEXT

New RF and Microwave Products this Week

6 July, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 6 July, 2022
 
Sponsored by ECS Inc. International
 
 
New RF and Microwave Products this Week
RF Variable Attenuator
31.75 dB 7-bit Digital Attenuator from 0.5 to 6 GHz
RF Variable Attenuator  from Guerrilla RF

The GRF6402 from Guerrilla RF is a 7-bit Digital Attenuator that operates from 0.5 to 6 GHz. It has an attenuation range of 31.75 dB with a step size of 0.25 dB and a settling time of 210 ns. The attenuator has an insertion loss of 1.4 dB and an IIP3 of 55 dBm. It features a programmable Rapid Fire attenuation setting that circumvents delays associated with SPI Programming.
Download Datasheet Product Details
RF Variable Attenuator
14-Bit, 80 dB Digitally Programmable Attenuator from 8 to 12 GHz
RF Variable Attenuator  from Quantic PMI (Planar Monolithics)

The DTA-812-BA-80-14B-SFF OPT10D27 from Quantic PMI is a Digitally Programmable Attenuator that operates from 8 to 12 GHz. It has an attenuation range of 80 dB with a step size of 0.005 dB and a switching speed of less than 500 ns. This 14-bit attenuator can handle an input power of 30 dBm and has an insertion loss of less than 8 dB.
Download Datasheet Product Details
RF Amplifier
Low Noise Amplifier MMIC from 2 to 4 GHz
RF Amplifier  from AmpliTech

The AGM-024 from AmpliTech is a Low Noise Amplifier MMIC that operates from 2 to 4 GHz. It provides 27.4 dB of gain with a noise figure of less than 0.7 dB and saturated output power of 14 dBm. The MMIC uses state-of-the-art GaAs pHEMT technology and is self-biased. It requires a DC supply voltage of 7 V, draws 30 mA of current, and consumes 210 mW of power.
Download Datasheet Product Details
Down Converter
Broadband RF Up-Down Converters Specifically Built for 5G Applications
Down Converter  from ThinkRF

The D4000 from thinkRF is a frequency converter specially built for 5G NR FR2 applications. It has a frequency range from 50 MHz to 40 GHz. The Up & down conversion is done in the same box with no add-ons required. It has a high precision built-in OCXO that enables non-coherent modulation/demodulation. A 100 MHz sync signal allows the synchronization of multiple boxes and a 10 MHz sync signal allows seamless synchronization with most of the Sub-6 GHz T&M Equipment.
Download Datasheet Product Details
Antenna Test & Measurement Frequency Extension System
Antenna Measurement Frequency Extension Modules from 40 to 500 GHz
Antenna Test & Measurement Frequency Extension System  from Farran

The Antenna Measurement Frequency Extension Modules (AET/AER) from Farran Technology can be used to extend the frequency range of systems from 40 to 500 GHz. They are dedicated Test & Measurement solutions for antenna performance verification and are a cost-effective way to expand test capability into the millimeter-wave range.
Download Datasheet Product Details
Power Sensor
Real-Time Peak Power USB Power Sensors from 50 MHz to 40 GHz
Power Sensor  from Boonton

The RTP5000 Series of USB Power Sensors from Boonton are Real-Time peak power sensors that operate from 50 MHz to 40 GHz (available in 6 GHz, 18 GHz, and 40 GHz configurations). They have a dynamic range from -60 dBm to +20 dBm and can take 100,000 measurements per second, with no gaps in signal acquisition and zero measurement latency.
Download Datasheet Product Details
Sponsored by ECS Inc. International
ECX-31B - Surface Mount Crystal
3.2 x 1.5 mm 32.768 kHz Tight Tolerance Surface Mount Crystal
The 3.2 x 1.5 mm ECX-31B is ideal for compact applications and STM32 microprocessors. The standard part has a tolerance of ±20 ppm with a ±10 ppm option available. It is available in 6pF, 7pF, 9pF, and 12.5pF load caps with an extended temp. range. Click Here to learn more.
Antenna Measurement System
CATR-Based OTA Test Chamber for 5G NR mmWave Signals
Antenna Measurement System  from Rohde & Schwarz

The R&S®ATS1800C from Rohde & Schwarz is a CATR-based 5G-NR Over-The-Air (OTA) test chamber for measuring 5G NR mmWave signals from 23.5 to 44.3 GHz. This 3GPP-compliant chamber has a bidirectional parabolic reflector that collimates beams from the feed antenna or DUT and has a quiet zone of 30 cm or even 40 cm depending on the reflector size selected.
Download Datasheet Product Details
Frequency Synthesizer
Broadband Frequency Synthesizer from 625 MHz to 10 GHz
Frequency Synthesizer  from SignalCore

The SC801A from SignalCore is a Broadband CW Signal Frequency Synthesizer that generates an output frequency from 625 MHz to 10 GHz. It has a frequency resolution of 1 MHz and a tuning speed of less than 500 µs. It delivers up to 7 dBm of output power with a phase noise of less than -115 dBc/Hz at 10 kHz offset. This synthesizer is based on a multi-loop architecture that improves phase noise over those that utilize single loop integer-N or fractional-N synthesizers by 15-20 dB.
Download Datasheet Product Details
Power Divider
16-Way Wilkinson Power Divider from 0.5 to 8 GHz for 5G/Wi-Fi 6
Power Divider  from MECA

The 816-2-4.250-M01 from MECA is a 16-Way Wilkinson Power Divider that operates from 0.5 to 8 GHz. It can handle an input power of 30 W, has an insertion loss of less than 6.3 dB, and provides more than 17 dB of isolation. The power divider has an amplitude balance of 1.3 dB and a phase balance of less than 20°. It is available in a module with SMA-female connectors and is suitable for 5G and Wi-Fi 6 applications.
Download Datasheet Product Details
RF Amplifier
2000 W Solid State GaN Power Amplifier from 900 to 930 MHz
RF Amplifier  from RFHIC

The RIM092K0-20 from RFHIC is a high power SSPA that operates from 900 to 930 MHz. This amplifier is based on GaN-on-SiC Transistors and provides an output power of up to 2000 watts with an efficiency of 63% while operating from a 50 V supply. This high-efficiency rugged device has been developed to replace industrial magnetrons and other vacuum tubes that are currently used in high power industrial applications.
Download Datasheet Product Details
RF Amplifier
1kW Solid-State Power Amplifier from 1 to 6 GHz for EMC Testing
RF Amplifier  from AR RF/Microwave Instrumentation

The Model 1000S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW output power of up to 1000 W with a small signal gain of 66 dB. This SSPA has spurious levels of -73 dBc and harmonic distortion of -30 dBc. The low spurious levels and high linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems.
Download Datasheet Product Details
RF Amplifier
250 W Solid-State Pulsed Power Amplifier from 9 to 10 GHz
RF Amplifier  from Empower RF

The 1222 from Empower RF Systems is a Solid-State power amplifier module that provides over 250 W of peak power from 9 to 10 GHz with a pulse width up to 500 µsec and a 20% duty cycle. The amplifier has an Enable/Disable time of less than 250 ns and its gain can be controlled with digital or analog interfaces. It utilizes 48V GaN on SiC devices and is lightweight, highly reliable, and rugged.
Download Datasheet Product Details
Sponsored by ECS Inc. International
 
 
RF Transistor
8 W GaN HEMT from DC to 15 GHz
RF Transistor  from Wolfspeed, A Cree Company

The CGHV1F006S from Wolfspeed is an unmatched, GaN HEMT that operates from DC to 15 GHz. The device can be used for L, S, C, X and Ku-band amplifier applications. It provides an output power of 8 watts with 15 dB gain. The transistor operates on a 40-volt rail circuit and is available in a 3 x 4 mm, surface-mount, dual-flat-no-lead (DFN) package.
Download Datasheet Product Details
RF Amplifier
8 W GaN Power Amplifier Module from 3.4 to 3.8 GHz
RF Amplifier  from Qorvo

The QPA3810 from Qorvo is a fully integrated Two-Stage Doherty Power Amplifier Module that operates from 3.4 to 3.8 GHz. It delivers 8 W (~39 dBm) of output power with 33 dB of gain. This GaN amplifier incorporates a driver and Doherty final stage delivering high power-added efficiency for the entire module. It requires a DC supply of 48 V and consumes 106 mA of current (for the final stage carrier).
Download Datasheet Product Details
Wireless SoC
2.4 GHz Multiprotocol Wireless SoCs for IoT Mesh Connectivity
Wireless SoC  from Silicon Labs

The EFR32MG24 Series from Silicon Labs are 2.4 GHz Multiprotocol Wireless SoCs that support mesh IoT wireless connectivity using Bluetooth LE 5.3, Matter, OpenThread and Zigbee protocols. These SoCs include AI/ML hardware accelerator and Secure Vault to enable smart, robust, and energy-efficient products that are secure from remote and local cyber-attacks.
Download Datasheet Product Details
Wireless SoC
2.4/5/6 GHz Wi-Fi 7/6E/6 and Bluetooth 5.3 Module for Audio Applications
Wireless SoC  from Qualcomm

The FastConnect 7800 from Qualcomm is a Wi-Fi 7/6E/6 and Bluetooth 5.3 Module that operates in 2.4, 5, and 6 GHz bands. It delivers a Wi-Fi data rate of up to 5.8 Gbps with a minimum latency of 2 ms. This module has a channel bandwidth of 320 MHz (single channel or 160 + 160 with High Band Simultaneous) or 240 MHz and supports 4K QAM modulation scheme.
Download Datasheet Product Details
Cellular Module
Single/Multi-Mode LTE Cat 4 Module for Global Coverage
Cellular Module  from u-blox AG

The LARA-L6004D from u-blox is a single or multi-mode LTE Cat 4 module that provides global coverage. It has an uplink data rate of up to 50 Mbit/s and a downlink data rate of up to 150 Mbit/s. This compact LTE Cat 4 module supports 18 LTE bands plus 3G/2G fallback with 3GPP Release 10 compliance. It requires a nominal DC supply of 3.8 V and draws 1.1 mA of current in idle state.
Download Datasheet Product Details
Termination
100 W Flanged Termination from DC to 10 GHz
Termination  from Barry Industries

The T50R0-100-39Y from Barry Industries is a BeO Flanged Termination that operates from DC to 10 GHz.  It can handle up to 100 watts of power while operating over a temperature range of -55 to 150 degrees Celcius. The chip is available with a standard impedance value of 50 ohms.
Download Datasheet Product Details
Switch Matrix
USB/Ethernet-Controlled 2x16 Blocking Switch Matrix from DC to 18 GHz
Switch Matrix  from Mini Circuits

The ZTVX-16-18-S from Mini-Circuits is a 2x16 Blocking Switch Matrix that operates from DC to 18 GHz. It has a bi-directional operation with an insertion loss of less than 2.5 dB and 90 dB of isolation. The switch matrix is ideal for expanding a standard 2-port VNA for multi-port or multi-device testing.
Download Datasheet Product Details
RF Inductor
10 to 150 nH Mini Air Core Inductors
RF Inductor  from Coilcraft

The 2712SP Series from Coilcraft are Air Core Inductors with inductance values from 10 to 150 nH (tolerances as low as 2%). A tight tolerance eliminates the need for circuit tuning. They have exceptionally high Q factors (above 85) over a wide frequency range and have an SRF from 1.4 to 6.6 GHz. They are RoHS compliant, 260°C compatible and measure 6.86 × 4.45 × 3.15 mm.
Download Datasheet Product Details
Directional Coupler
20 dB Directional Coupler from 6 to 40 GHz
Directional Coupler  from Pasternack Enterprises Inc

The PE2CP1124-20 from Pasternack is a Directional Coupler that operates from 6 to 40 GHz. This 20 dB coupler has a directivity of more than 10 dB and an insertion loss of less than 1 dB. It can handle an average input power of 30 W (CW) and a peak input power of 0.5 kW. This coupler is available in a module that measures 1.10 x 0.59 x 0.43 inches with 2.92 mm (female) connectors.
Download Datasheet Product Details
Band Pass Filter
Radiation-Tolerant mmWave Bandpass Filters from 5 to 40 GHz
Band Pass Filter  from Benchmark Lark Technology

The mmW-STL Series from Benchmark Lark Technology are mmWave Stripline Band Pass Filters that operate from 5 to 40 GHz. These radiation-tolerant filters use low-loss substrates like Liquid Crystal Polymer (LCP), PTFE, and rigid thermoset materials to offer excellent electrical and mechanical properties such as stable dielectric constant and low dissipation factor.
Download Datasheet Product Details
Diplexer
C-Band Cavity Diplexer/Splitter Assembly for Satellite Applications
Diplexer  from MtronPTI

The UFDX9999-002 from MtronPTI is a C-Band Cavity Diplexer/Splitter Assembly that operates from 6670 to 7070 MHz (Uplink) and 7320 to 7920 MHz (Downlink). It incorporates highly selective bandpass filters and a splitter for full-duplex data transmission with low loss and outstanding isolation between the uplink and downlink bands.
Download Datasheet Product Details
Laminate
High Stability Thermoset RF Laminates for Radar Applications from 60 to 81 GHz
Laminate  from Rogers Corporation

The RO4835IND Lo Pro from Rogers Corporation are Thermoset RF Laminates that have been specifically designed for short-range (<30 m) industrial radar applications from 60-81 GHz where excellent electrical performance and cost-efficiency are equally important. The Lo Pro Laminates offer a typical dielectric constant of 3.48 and a dissipation factor of 0.0037 with stable performance over a wide frequency range.
Download Datasheet Product Details
SATCOM Antenna
SATCOM Antenna from 17.7-20.2/27.5-30 GHz for Inflight Broadband
SATCOM Antenna  from ThinKom

The ThinAir Ka1717 from ThinKom is a SATCOM Antenna that operates in the Ka-Band from 27.5 to 30 GHz (Tx band) and 17.7 to 20.2 GHz (Rx band). It supports GSO (Geostationary Satellites) and NGSO (Non-Geostationary Satellites) and delivers exceptional network flexibility and consistently high performance for global inflight broadband.
Download Datasheet Product Details
Software Defined Radio
Maritime VHF Data Exchange System (VDES) Software Defined Radio
Software Defined Radio  from CML Microcircuits

The VDES1000 from CML Microcircuits is a Maritime VHF Data Exchange System (VDES) Module that operates from 156.025 to 162.025 MHz. It is designed to realize a fully compliant multi-channel AIS Class A, ASM and VDE transceiver. This software-defined radio (SDR) solution is implemented using state-of-the-art technology to provide very tight integration and is fully upgradeable via software updates making it future-proof.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]