1. everything RF
  2. RF Newsletters
more
PREV 13 July, 2022 NEXT

New RF and Microwave Products this Week

13 July, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 13 July, 2022
 
Sponsored by Digi-Key
 
 
New RF and Microwave Products this Week
Frequency Synthesizer
Low-Jitter Frequency Synthesizer from 0.8 to 12.8 GHz with Integrated VCO
Frequency Synthesizer  from Analog Devices

The ADF4377 from Analog Devices is a Wideband Microwave Frequency Synthesizer that can generate an output frequency from 800 MHz to 12.8 GHz. This ultra-low jitter synthesizer is based on a dual-output integer-N phase-locked loop (PLL) that integrates a voltage-controlled oscillator (VCO) to support data converter and mixed-signal clock devices.
Download Datasheet Product Details
Band Pass Filter
LTCC Bandpass Filter with Passband from 22 to 31 GHz
Band Pass Filter  from Mini Circuits

The BFCQ-2702+ from Mini-Circuits is an LTCC Bandpass Filter with a passband from 22 to 31 GHz and a center frequency of 26.1 GHz. It has an insertion loss of less than 2.75 dB in the passband and provides a more than 20 dB attenuation above and below the passband. The BPF can handle an input power of up to 1 W and has an operating temperature range from -55 to +125°C.
Download Datasheet Product Details
Power Divider
2-Way Multi-Octave Power Divider from 0.5 to 2 GHz
Power Divider  from TRM Microwave

The DMS222 from Quantic TRM is a 2-Way Multi-Octave Power Divider that operates from 0.5 to 2 GHz. It can handle an input power of up to 30 W, has an insertion loss of less than 0.5 dB, and provides 20 dB of isolation. The power divider uses a microstrip design to provide optimal performance and has a phase balance of ±2° and an amplitude balance of ±0.2 dB.
Download Datasheet Product Details
Data Link
Lightweight 10 W Dual-MIMO Radio System from 1350 to 1500 MHz
Data Link  from Triad RF Systems

The THPR1039 from Triad RF Systems is a lightweight Dual MIMO 10 W (5W per channel) Radio System that operates in the L-Band from 1350 to 1500 MHz. It has been developed for long-distance UAS Video and C2 links, which achieves RF link ranges over 50km when used in both ground and air radio segments.
Download Datasheet Product Details
Diplexer
Diplexers from 71-76/81-86 GHz for Commercial and Military Applications
Diplexer  from Filtronic

The Hades Series from Filtronic are Active Diplexers that operate in the E-Band from 71 to 76 and 81 to 86 GHz. They can be configured to incorporate a range of GaAs and/or InP amplifiers in both the Tx and Rx chain and include the option to power combine 2 GaAs PAs to deliver market-leading linear Tx powers for long-range terrestrial and non-terrestrial E-Band communications.
Download Datasheet Product Details
Wireless SoC
2.4/5 GHz 2x2 Wi-Fi 5 + Bluetooth 5.3 Wireless SoC
Wireless SoC  from NXP Semiconductors

The 88W8997 from NXP Semiconductors is a Dual-Band 2.4/5 GHz 2x2 Wi-Fi 5 and Bluetooth 5.3 Wireless SoC for multi-user (MU) MIMO links. This SoC uses various design enhancements and is fabricated using a low-power 28 nm process technology to reduce the power consumption by up to 40% compared to existing solutions.
Download Datasheet Product Details
Sponored by Digi-Key
CYW4373E
Sterling-LWB5+ WiFi 5 + Bluetooth 5.2 Module / USB Adapter
Powered by Infineon’s CYW4373E silicon, the Sterling-LWB5+ WiFi + Bluetooth module from Laird Connectivity is purpose-built for IIoT connectivity through a secure, reliable, and robust feature set. It’s IoT from the start: fully certified, easy to integrate, and the fastest route to market for IoT. Click here to learn more.
Board Level EMI/RFI Shielding Can
One and Two-Piece Drawn-Seamless EMI/RF Shields
Board Level EMI/RFI Shielding Can  from Masach Tech

The EMI/RF Sheilds from Masach Tech are available in one / two-piece options configurations with Surface Mount or Snap-Fit mounting. The shields are available in multiple sizes and fabricated using Nickel-Silver or Tin-Steel raw materials. Masach's drawn-seamless EMI/RFI shields boast top performance across metrics, featuring a seamless protective cage, robust construction and optimal planarity.
Download Datasheet Product Details
RF Cable Assembly
24-Channel High-Density SMPM for Cryogenic Applications from DC to 40 GHz
RF Cable Assembly  from IntelliConnect

The C446-ZZZ-101G from IntelliConnect is a 24-Way High-Density SMPM Plug to SMPM Plug Cable Assembly that operates from DC to 40 GHz. This cryogenic interconnect solution has 24 channels where each set of connectors is connected using a 0.47-inch semi-rigid conformance cable.
Download Datasheet Product Details
RF Amplifier
4 kW GaN Solid-State Pulsed Power Amplifier from 4 to 8 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP2083P-4KW from Exodus Advanced Communications is a Solid-State Pulsed Power Amplifier that operates from 4 to 8 GHz. It delivers a pulsed output power of 4 kW with more than 66 dB gain. This amplifier has a Class AB linear GaN design, is equipped with built-in protection circuits, and provides extensive monitoring parameters.
Download Datasheet Product Details
Vector Network Analyzer
2-Port Compact USB VNA from 300 kHz to 1.3 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The TR1300/1 from Copper Mountain Technologies is a 2-Port lab-grade vector network analyzer that operates from 300 kHz to 1.3 GHz. This compact computer-controlled VNA has a dynamic range of 130 dB and can measure up to 100,001 points. It has an RF measurement module and TR software application that can run on Windows or Linux operating systems on a PC, laptop, tablet, or x86 board computer connecting to the measurement hardware via USB interface.
Download Datasheet Product Details
Signal Generator
10 MHz to 40 GHz, Phase Coherent, Multi-Channel RF Synthesizers
Signal Generator  from Holzworth Instrumentation

The HSX Series are broadband, phase-coherent frequency sources that are available in five frequency configurations from 10 MHz to 3 GHz, 6 GHz, 12 GHz, 24 GHz, and 40 GHz. They have industry-leading phase noise and spectral purity performance coupled with a highly accurate dynamic range from -110 to 20 dBm. These synthesizers are available in 1, 2, 3 or 4 channel Custom COTS models that can be ordered with any combination of frequency options.
Download Datasheet Product Details
Dual Directional Coupler
500 W, Dual Directional Coupler from 2 to 6.5 GHz
Dual Directional Coupler  from Werlatone Inc

The C10748 from Werlatone is a 4-Port Dual Directional Coupler that operates from 2000 to 6500 MHz. This 60 dB coupler has more than 15 dB of directivity and an insertion loss of less than 0.2 dB. It can handle a CW input power of 500 W and has a VSWR of less than 1.35:1. The coupler has been built using two 3-Port uni-directional couplers internally connected in tandem providing measurement of both forward and reverse power.
Download Datasheet Product Details
Sponsored by Digi-Key
Murata
Murata ABR Module
Type ABR is a small module (integrated PCB antenna) based on NXP 88MW320 (wireless microcontroller), supporting Wi-Fi® 802.11 b/g/n up to 72.2 Mbps PHY data rate; with an integrated 200MHz ARM Cortex-M4F MCU for host-side applications. Click here to learn more.
Power Divider
8-Way Power Divider/Combiner from 0.5 to 8 GHz
Power Divider  from MECA

The 808-2-4.250 from MECA is an 8-Way Power Divider/Combiner that operates from 0.5 to 8 GHz. It has an insertion loss of less than 4.8 dB with isolation of over 20 dB. The power divider can handle an input power of up to 30 W and has a VSWR of 1.6:1. It has an amplitude balance of less than 1 dB and a phase balance of under 15°.
Download Datasheet Product Details
GNSS Module
Ultra-Low Power Multi-Constellation GNSS Receiver Module
GNSS Module  from Antenova

The M20071 from Antenova is a GNSS Receiver Module that can concurrently track GPS, GLONASS, GALILEO, and BeiDou constellations. It operates from 1559 to 1609 MHz with an acquisition sensitivity of -148 dBm and tracking sensitivity of -165 dBm. This low-power receiver is based on the MediaTek AG3335MN chipset that is manufactured on a 12 nm process and requires a DC supply of 1.8 V.
Download Datasheet Product Details
RF Module
2.4/5 GHz Wi-Fi 5 + Bluetooth 5.3 System on Module for IoT Applications
RF Module  from Laird Connectivity

The Summit SOM 8M Plus is a Wi-Fi 5 and Bluetooth 5.3 System on Module that operates in the 2.4 and 5 GHz bands. It is powered by NXP’s i.MX 8M Plus processor and 88W8997 wireless silicon coupled with onboard NXP PMICs (PCA9450CHN and PM823UK), performance LPDDR4 RAM, and eMMC 5.1 storage.
Download Datasheet Product Details
Switch Matrix
6x6 Non-Blocking Solid-State Matrix Switch from 2 to 6 GHz
Switch Matrix  from JFW Industries

The 50MS-304 from JFW Industries is a 6x6 Non-Blocking Solid-State Matrix Switch that operates from 2 to 6 GHz. This matrix switch has bi-directional ports with an insertion loss of 18.5 dB (@6 GHz) and a switching speed of 1 µs. It provides more than 70 dB isolation between input-to-input/input-to-output ports and 18 dB between output-to-output ports (if connected to the same input).
Download Datasheet Product Details
Antenna Positioner
3-Axis Antenna Positioners for Test & Measurement Applications
Antenna Positioner  from Microwave Vision Group

The AL/EL/AZ Series from the Microwave Vision Group are 3-Axis Antenna Positioners that provide accurate, balanced rotation, and controllable velocity in the positioning of light antennas. They can handle a vertical load of up to 273 kg and allow adjustable travel of the antenna under test in 3 axes: upper azimuth, elevation and lower azimuth.
Download Datasheet Product Details
Frequency Synthesizer
13.9 GHz Frequency Synthesizer Module for LEO Space Applications
Frequency Synthesizer  from Teledyne e2v HiRel Electronics

The TDFFS014 from Teledyne e2v HiRel is a fractional-N frequency synthesizer module with 12.5-13.9 GHz and 6.25-6.95 GHz outputs. The module is optimized for commercial space and high-reliability applications and has excellent phase noise performance of -102 dBc/Hz (13 GHz at 100 kHz offset, typical).
Download Datasheet Product Details
OCXO
100 MHz Low G-Sensitivity Hermetically-Sealed OCXOs
OCXO  from Taitien

The NA-100M-6900 Series from Taitien are OCXOs that operate at 100 MHz. They provide a sine wave output waveform and have a phase noise of -185 dBc/Hz @ 100 kHz offset. These oscillators have a G-sensitivity of 1 ppb/g and a tuning range of ±2.5 ppm with a control voltage from 0 to +10 V. These OCXOs are available small hermetically sealed through-hole packages suitable for humid environmental conditions.
Download Datasheet Product Details
VCXO
Sine-Wave/CMOS VCXOs from 80 to 125 MHz
VCXO  from NEL Frequency Controls

The AB-X32APXXX20-X Series from NEL Frequency Controls are Voltage Controlled Crystal Oscillators (VCXOs) that operate from 80 to 125 MHz. They provide extremely low phase noise and jitter with sine-wave or CMOS outputs. These oscillators have an SSB phase noise of -155 dBc/Hz@ 10 kHz offset and a G-sensitivity of 0.2 ppb/G.
Download Datasheet Product Details
RF Shielded Test Enclosure
CATR-Based OTA Test Chamber for 5G NR mmWave Signals
RF Shielded Test Enclosure  from Rohde & Schwarz

The R&S®ATS1800C from Rohde & Schwarz is a CATR-based 5G-NR Over-The-Air (OTA) test chamber for measuring 5G NR mmWave signals from 23.5 to 44.3 GHz. This 3GPP-compliant chamber has a bidirectional parabolic reflector that collimates beams from the feed antenna or DUT and has quiet zone of 30 cm or even 40 cm depending on the reflector size selected.
Download Datasheet Product Details
RF Transistor
1.03 GHz GaN-on-SiC Power Transistor for Avionics Applications
RF Transistor  from Integra Technologies, Inc.

The IGN1030S3600 from Integra is a GaN-on-SiC RF Power Transistor that operates in the L-band at 1.03 GHz. It delivers an output power of over 3600 W with more than 18 dB of gain, and has up to 75% efficiency. This RoHS compliant power transistor is based on GaN-on-SiC HEMT technology and is designed to suit the needs of IFF and SSR based avionics systems.
Download Datasheet Product Details
DC Block
Low PIM Inner-Outer DC Block from 376 to 2700 MHz
DC Block  from RD Microwaves

The DC-A33 from RD Microwaves is an Inner-Outer DC Block that operates from 376 to 960 MHz and 1710 to 2700 MHz. This DC block can handle an average input power of 100 W, a peak input power of 3 kW, and a DC voltage rating of 17.5 kV. It has an insertion loss of less than 0.35 dB and a PIM of -160 dBc @ 700 MHz.
Download Datasheet Product Details
Microwave Backhaul Radio Links
Multi-Gigabit Low-Latency E-Band Radio for 71-76/81-86 GHz Bands
Microwave Backhaul Radio Links  from Fujitsu

The BroadOne™ GX4000 from Fujitsu is a Versatile E-Band Radio that operates from 71 to 76 GHz and 81 to 86 GHz. It provides an Ethernet throughput of 3 Gbps, has a channel size of 4500 MHz and latency of less than 50 µs. This radio uses Fujitsu’s impulse radio technology which provides various advantages that include reduced power consumption, reduced size and weight and low latency due to direct data to impulse modulation.
Download Datasheet Product Details
Base Station Antenna
8-Port Beamforming Antenna from 3300 to 4200 MHz
Base Station Antenna  from Kaelus

The PBOQBU01 from Kaelus is an 8-Port Beamforming Antenna that operates from 3300 to 4200 MHz. It has 4 antenna columns with two ports per band and supports 8T8R beamforming. The antenna has an azimuth beamwidth of 90° and a single RET control with an electrical downtilt range from 2 to 12° and synchronized tilt for all four controls.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, white papers, articles, interviews and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]