Satellite communications play a vital role in the global telecommunications system. There are thousands of satellites orbiting the Earth and this number is going to go up significantly in the next few years. Traditionally the use cases for Satellite communications were limited to GPS and a few other Aerospace and Defense applications, however 2020 has been a year where we have seen many new use cases for Satellites. These include providing internet to remote areas, a resurgence of satellite phones and telecom, the launch of Galileo and other GNSS services, One Web and Space-X satellite-based connectivity solutions. everything RF has compiled a list of the SATCOM products that were most popular on the website in 2020.
Top 10 SATCOM Products:
C-Band LNB to Address 5G Interference Issues
The 3200-BPF from Norsat International is a C-band phase-locked loop (PLL) LNB that accepts input frequencies from 3.7 to 4.2 GHz and down-converts them to 950 to 1450 MHz (LO Frequency of 5.15 GHz). The product is ideally suited for existing installations or new installations needing to mitigate interference with the onset of 5G. It is available in a module that measures 144(L) x 70(W) x 98(H) mm with an N-type / F-type connector at the output and a CPR229G interface at the input. Click here for more details.
Ku-Band VSAT Block-Up Converter for SATCOM Applications
The ALB128 Series from Agilis is a Ku-Band VSAT Block-Up Converter (BUC) for satellite communication. The BUC upconverts an input frequency from 950 - 1700 MHz to an output frequency from 12.75 - 14.80 GHz. It delivers 8 W of output power with a gain of 64 to 72 dB. This BUC is designed for high-reliability operation in various applications such as flyaway antenna and is also suitable for broadband applications (such as DVB-RCS) in satellite IP networks. Click here for more details.
Ka-Band BUCs for Mobile & SATCOM Terminals
The BUC series from Alga are Ka-Band Block Up Converters that can be used for commercial and military applications. These BUCs have two LO’s that can upconvert an input frequency from 1000 - 1500 MHz to an output frequency from 29.5 - 30 GHz in the commercial band and an input frequency from 1000 - 2000 MHz to an output frequency from 30 - 31 GHz in the military band. Click here for more details.
Ku-Band Low Noise Block Converter from 10.95 GHz to 11.70 GHz
The TLNB-12000X from General Dynamics SATCOM Technologies band-switching Low Noise Block that has been designed for satellite earth stations and other telecommunications applications. It operates in the Ku-Band accepting a signal with an input frequency of 10.95 GHz to 11.70 GHz. Click here for more details.
250 W GaN Power Amplifier for X-band Applications
The SGN-X3-200 from KRATOS General Microwave is a GaN Power Amplifier that operates in the X-band with 9% bandwidth. It delivers peak saturated output power of more than 250W with a large signal gain of 55 dB and an efficiency of 20%. It is suitable for radar, data links, communications, and test system applications. Click here for more details.
2 Watt Ka-Band VSAT Transceiver
The XRF31F14ZD/L from Global Skyware is a Ka-Band VSAT Transceiver with a Tx frequency from 29 to 30 GHz and an Rx frequency from 17.8 to 20.2 GHz. The transceiver integrates a BUC, an LNB, and a field configurable circular polariser. It is available in a ruggedized IP-67 sealed enclosure and additionally includes audible pointing assistance to simplify installation. Click here for more details.
K/Ka-Band Satellite Communications Transceiver Module-Single Channel
The LE-KaCM-TRX100 from Arralis is a Ka-Band Transceiver with a Tx frequency from 17 to 21 GHz and Rx frequency from 27 to 31 GHz. On the Tx side, this transceiver upconverts an IF signal from 1.4 to 2.5 GHz to an RF Signal from 17-21 GHz. This K/Ka-band transceiver module enables a direct interface with a Modem or Software Defined Radio (SDR) enabling full-function Ka-band satellite systems. The RF outputs and inputs are standard waveguide flanges for high reliability and low loss antenna connections. Click here for more details.
1.3 m Flyaway Satellite Terminal for X, Ku and Ka Bands
The TM130 from Tampa Microwave is a 1.3m Flyaway Satellite Terminal that supports X, Ku, Ku-30B, and Ka-bands (military and commercial). It delivers high-speed broadband access for a wide range of critical missions. The terminal can be packed as a single band, dual-band, or tri-band system into two airline checkable transit cases that are FAA compliant (3 cases required for tri-band). Click here for more details.
32 x 32 Enigma L-band Switch Matrix / Router
The NGM-21 Series from ETL Systems are L-band Switch Matrices / Routers that operate from 850 MHz to 2150 MHz. It has 32 Inputs x 32 Outputs with 50 ohm SMA/BNC connectors or 75 ohm F Type/BNC connectors. The design offers rugged dual redundant power supplies with simple front access, enhanced CPU change-out, hot-swap fans and new card connectors. Click here for more details.
2 to 8 Band Switchable LNB from 17.20 to 22.40 GHz
The Ka-Band LNB from Swedish Microwave operates from 17.20 to 22.40 GHz with 2 to 8 switchable bands. It downconverts the input RF Frequency from 17.20 - 22.40 GHz to 950 - 1950 MHz. The device consumes up to 5 watts of power while operating over a DC supply voltage of 12 to 28 V. Click here for more details.
NOTE: This list has been compiled based on actual analytics data from everything RF. It consists of the products that were most viewed by users on everything RF in a specific category in 2020 (not in any specific order). We have limited the number of products shown for each company to 1, even if there were multiple products from a single company.
Click here to view the latest product release and new stories on SATCOM.
Click here to see a longer list of popular SATCOM Products on everything RF.
