1. everything RF
  2. RF Newsletters
more
PREV 20 July, 2022 NEXT

New RF and Microwave Products this Week

20 July, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 20 July, 2022
 
Sponsored by Mouser
 
 
New RF and Microwave Products this Week
Front End Module
2.4 GHz WLAN Front-End IC for Wi-Fi 6 Applications
Front End Module  from NXP Semiconductors

The WLAN7207H from NXP is a 2.4 GHz WLAN Front-End IC that is designed for Wi-Fi 6 applications. It includes a Tx power amplifier with a directional coupler, a low-noise receive amplifier, and a transmit/receive switch with a Bluetooth channel. The power amplifier supports 3 different TX gain modes to improve power efficiency.
Download Datasheet Product Details
Beamforming IC
Tx/Rx Beamforming IC from 47.2 to 48.2 GHz for 5G-NR Applications
Beamforming IC  from Analog Devices

The ADMV4728 from Analog Devices is a Transmit/Receive Beamforming IC that operates from 47.2 to 48.2 GHz. It integrates 16 configurable transmit and receive channels with 8 dual-polarized horizontal and vertical channels each. This chip operates in Tx/Rx half-duplex modes and uses external pins to provide fast TDD switching time.
Download Datasheet Product Details
Rubidium Oscillator
High-Precision 10 MHz Rubidium Source
Rubidium Oscillator  from Orolia

The iSource+® StarLPRO-1500 from Orolia is a High-Precision Rubidium Source that has an output frequency of 10 MHz. It provides a sine-wave output with a phase noise of -145 dBc/Hz @ 1KHz offset and short-term stability of 10-12 @ 100 s. It requires a DC supply of 12/24 V and includes an internal diode for reverse voltage protection along with protection against ESD and over-current.
Download Datasheet Product Details
RF Amplifier
8 kW GaN Solid State Pulsed Power Amplifier from 1 to 1.4 GHz
RF Amplifier  from Empower RF

The 2244 from Empower RF Systems is a Solid-State Pulsed Power Amplifier System that operates from 1 to 1.4 GHz. It can deliver a pulsed output power of more than 8 kW with a power gain of 74 dB and has a duty cycle from 0.5 to 20%. This amplifier system has a multi-drawer structure, each drawer has multiple high-power GaN-on-SiC devices that can be used to provide a wide frequency response, high gain, high peak power, and low distortions.
Download Datasheet Product Details
RF Amplifier
2500 W Solid-State Amplifier from 10 kHz to 225 MHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 2500A225B from AR RF/Microwave Instrumentation is a Solid-State Amplifier that operates from 10 kHz to 225 MHz. This self-contained, air-cooled amplifier, when used with a sweep generator, delivers more than 2500 W of output power with a gain of over 64 dB. It is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. This amplifier can be used for a wide range of applications including EMC Testing.
Download Datasheet Product Details
Vector Network Analyzer Extender
VNA Frequency Extender from 110 to 170 GHz
Vector Network Analyzer Extender  from Farran

The FEV-06-TR-0004 from Farran Technology is a Vector Network Analyzer Extender that up-converts an input frequency from 9.16 to 14.17 GHz to an output frequency from 110 to 170 GHz. It has an integrated variable attenuator that provides an attenuation of up to 25 dB and a 2-port controller that allows it to perform network analysis.
Download Datasheet Product Details
Sponsored by Mouser
 
 
RF Over Fiber Module
RF-over-Fiber Optical Receiver Unit from 850 to 2450 MHz
RF Over Fiber Module  from ETL Systems

The SRY-RX-L1-924 from ETL Systems is an RF-over-Fiber Optical Receiver Unit that operates from 850 to 2450 MHz and supports optical wavelengths from 1100 to 1650 nm. It has a noise figure of less than 15 dB and an SFDR of 105 dB/Hz. This receiver module includes local monitoring for PSU voltage, temperature, RF modulation power, laser optical power and also includes LED indicators for module power and status.
Download Datasheet Product Details
RF Inductor
Wire-Wound Ceramic Chip Inductors from 0.45 to 24 nH
RF Inductor  from Coilcraft

The 016008C Series from Coilcraft are Ceramic Chip Inductors with inductance values from 0.45 to 24 nH. These wire-wound inductors have a DC resistance of less than 1550 mOhms and can handle up to 550 mA of RMS current @ 25°C. They have a higher Q-factor than their thin-film counterparts, making them suitable for high-frequency applications in cell phones, wearable devices, and LTE or 5G IoT networks.
Download Datasheet Product Details
RF & Microwave Circulator
Coaxial Circulators from 10 MHz to 20 GHz
RF & Microwave Circulator  from UIY Inc.

The coaxial circulators from UIY operate from 10 MHz to 20 GHz. They have an insertion loss of below 1.2 dB, isolation of over 14 dB, and can handle up to 600 watts of forward power. These circulators are available in a module with N-type and SMA connectors as standard products and can also be ordered as a custom module. They are suitable for Military, Space & Commercial applications.
Download Datasheet Product Details
RF & Microwave Isolator
Triple Junction Cryogenic Isolator from 4.3 to 4.9 GHz
RF & Microwave Isolator  from Low Noise Factory

The LNF-ISISISC4.3_4.9A from Low Noise Factory is a Cryogenic Triple Junction Isolator that operates from 4.3 to 4.9 GHz. It has an insertion loss of 0.4 dB (at 5 K) and provides 70 dB of isolation. This circulator has been designed from the ground up to meet the strict requirements of ultra-low temperature physics research.
Download Datasheet Product Details
RF Variable Attenuator
200 to 6000 MHz Modular Attenuator Assembly Expandable up to 192 Attenuators
RF Variable Attenuator  from JFW Industries

The 50PA-1068 from JFW Industries is a programmable attenuator controller module that can be configured to have up to 192 Attenuators. The controller module can be connected to a maximum of 8 attenuator modules. Each attenuator module has 24 attenuators with SMA connectors or 12 attenuators with N-Type connectors making it a total of 192 Attenuators.
Download Datasheet Product Details
Software
Electromagnetic Analysis Tool for Predicting Radar Cross Section
Software  from Remcom

XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates techniques including Geometric Optics (GO), the Uniform Theory of Diffraction (UTD), Physical Optics (PO), and the Method of Equivalent Currents (MEC).
Download Datasheet Product Details
Sponsored by Mouser
 
 
Noise Generator
White Gaussian Noise Generators for Jitter Testing up to 30 GHz
Noise Generator  from Noisecom

The J7000A Series from Noisecom are White Gaussian Noise Generators that can generate noise signals up to 30 GHz. They deliver an output noise power of -3 dBm with excellent flatness. These noise generators have an integrated noise source and noise path attenuator that provides attenuation from 0 to 63 dB (up to 2 GHz) in 0.1 dB steps.
Download Datasheet Product Details
RF Transistor
25 W Surface-Mount LDMOS FET from 500 to 1400 MHz
RF Transistor  from Wolfspeed

The PTVA120252MT from Wolfspeed is an LDMOS FET that operates from 500 to 1400 MHz. It delivers an output power of 25 W (P1dB) with a power gain of 19.8 dB and has a drain efficiency of 64%. This transistor is manufactured on Wolfspeed's advanced LDMOS process, which provides excellent thermal performance, and superior reliability and has integrated ESD protection.
Download Datasheet Product Details
RF Amplifier
0.25 W Linear Power Amplifiers without DPD for 5G Applications from 2.5 to 2.7 GHz
RF Amplifier  from Guerrilla RF

The GRF5526 from Guerrilla RF is an RF Power Amplifier that operates from 2.5 to 2.7 GHz. It provides 30 dB of gain with a noise figure of 3.3 dB and a P1dB of 32.2 dBm. This two-stage InGaP HBT PA has exceptional native linearity, which makes it an ideal choice for transmitter applications that typically do not employ digital pre-distortion correction schemes.
Download Datasheet Product Details
RF Amplifier
10 W Surface-Mount Power Amplifier from 9 to 11 GHz
RF Amplifier  from Altum RF

The ARF1020Q5 from Altum RF is a Power Amplifier that operates in the X-band from 9 to 11 GHz. It delivers an output power of 10 W with a power gain of 28 dB and has a power added efficiency (PAE) of 45% for CW/Pulsed operations. This RoHS-compliant amplifier is available in a surface-mount package that measures 5 x 5 mm and is ideal for radar, telecommunications, and test and measurement applications.
Download Datasheet Product Details
Cellular Module
5G-NR Sub-6 Cellular Module for Network Terminal Applications
Cellular Module  from Fibocom

The FM160-EAU from Fibocom is a Cellular Module that operates in the Sub-6 GHz band. This module is compliant with the 3GPP Release 16, which is backward compatible with LTE/WCDMA network standards. It uses Qualcomm’s Snapdragon X62 modem chipset to power the module and provides a data rate of 3.5 Gbps during downlink and 900 Mbps during uplink.
Download Datasheet Product Details
Cellular Module
3GPP E-UTRA Release 13/14-Compliant LPWA Module
Cellular Module  from Quectel

The BG95xA-GL from Quectel is an LPWA Module that is compliant with the 3GPP E-UTRA Release 13/14 specification. It supports LTE Cat M1/NB1/NB2/GPRS bands and has integrated iSIM technology. This module features the MIPS 5150 processor with integrated RAM & flash for reduced current consumption using various power optimization modes including PSM, eDRX, etc.
Download Datasheet Product Details
GNSS Module
Miniature M-Code GPS Receiver
GNSS Module  from BAE Systems

The Miniature PLGR Engine – M-Code (MPE-M) GPS Receiver from BAE Systems is capable of receiving existing operational GPS signals along with the newer M-Code signal. It delivers geolocation and precise positioning capabilities for space-constrained applications while providing increased security and anti-jam capabilities.
Download Datasheet Product Details
RF Transceiver
252-Channel Advanced Digital TACAN Receiver-Transmitter System
RF Transceiver  from Collins Aerospace

The AN/ARN-153(V) from Collins Aerospace is an Advanced Digital Tactical Airborne Navigation (TACAN) Receiver-Transmitter System. It has a Tx frequency range from 1025 to 1150 MHz, an Rx frequency range from 962 to 1213 MHz and provides coverage up to 390 nautical miles.
Download Datasheet Product Details
Software Defined Radio
Weatherproof Human Wearable SDR Platform from 70 MHz to 6 GHz
Software Defined Radio  from Pixus Technologies

The RB210 from Pixus Technologies is a Rugged Software Defined Radio (SDR) platform that operates from 70 MHz to 6 GHz. It is designed for SIGINT, passive RADAR, drone deterrence/spoofing, and prototyping systems for advanced wireless (Wi-Fi/Cell/MIMO). This SDR integrates 2 transmit and 4 receive chains that can be independently controlled and offers customizable modular front and rear faceplates according to the user’s requirement.
Download Datasheet Product Details
Waveguide Filter
IP66-Rated Waveguide Bandpass Filter with Passband from 3.7 to 4.2 GHz
Waveguide Filter  from Norsat

The eBPF-C-1 from Norsat is a Bandpass Filter with a passband from 3.7 to 4.2 GHz. It has an insertion loss of less than 1.4 dB in the passband and provides more than 60 dB of rejection at 3.682 GHz. This bandpass filter is designed to reject terrestrial interference in the C-band and provide exceptional performance with a narrow guard band (<20 MHz).
Download Datasheet Product Details
TCXO
Radiation-Tolerant TCXO from 2.5 to 120 MHz
TCXO  from Greenray Industries

The T1276 from Greenray is a Radiation-Tolerant TCXO that operates from 2.5 to 120 MHz. It has a CMOS/Sine-wave output with a phase noise of -90 dBc/Hz (@ 10 Hz offset at 20 MHz). This oscillator has an acceleration sensitivity of less than 0.07 ppb/g and frequency stability of ±0.3 ppm from 0°C to +50°C. It requires a DC supply of 3.3/5 V and consumes less than 35 mA of current.
Download Datasheet Product Details
Power Divider
8-Way, 30 W Power Divider from 690 to 2700 MHz
Power Divider  from Centric RF

The CS0727SB-8 from Centric RF is an 8-Way Power Divider that operates from 690 to 2700 MHz. It can handle an input power of 30 W, has an insertion loss of 0.8 dB, and provides 22 dB of isolation. This power divider has an amplitude balance of ±0.3 dB and a phase balance of ±3°. It is available in a module with SMA connectors.
Download Datasheet Product Details
Microwave Backhaul Radio Links
Multi-Operator 5G Distributed Antenna System from 3700 to 3980 MHz
Microwave Backhaul Radio Links  from SOLiD

The ALLIANCE from SOLiD is a Multi-Operator 5G Distributed Antenna System (DAS) that operates from 3700 to 3980 MHz. This modular, multi-operator DAS solution supports public safety communications, 2-way radio, and commercial wireless services -all delivered over a single fiber and common headend.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]