New RF and Microwave Products this Week . |
|
|
8 W GaN Power Amplifier MMIC from 13.75 to 14.5 GHz |
RF Amplifier
from Qorvo
|
The QPA0015 from Qorvo is a GaN Power Amplifier that operates from 13.75 to 14.5 GHz. It delivers an output power of 39 dBm (8 W) with a gain of 35 dB and a power-added efficiency (PAE) of 32%. This power amplifier has a return loss of 15 dB (input) & 6 dB (output) and an IM3 of -25 dBc. It is fabricated using Qorvo's production 0.15 µm GaN-on-SiC process (QGaN15) and has on-chip blocking capacitors following the DC grounds on the input and output ports. |
|
Download Datasheet
Product Details | |
|
|
|
9 dB Power-Film Flange Attenuator from DC to 500 MHz |
Fixed Attenuator
from Spectrum Control
|
The PPA100-9 from Inmet by Spectrum Control is a Power-Film Flange Attenuator that operates from DC to 500 MHz. It provides 9 dB of attenuation with an accuracy of ±0.5. This 50-Ohm attenuator can handle an input power of up to 100 W and has a VSWR of less than 1.50:1. It has a Beryllium Oxide substrate, an alumina ceramic cover, and gold-plated beryllium copper tabs. |
|
Download Datasheet
Product Details | |
|
|
|
USB Programmable Signal Generator from 2 to 8 GHz |
Signal Generator
from Vaunix
|
The LMS-802CX from Vaunix is a USB Programmable RF Signal Generator that operates from 2 to 8 GHz. It is designed to allow easy programmability to generate fixed-frequency, unidirectional or bidirectional frequency sweep, pulse modulation, and chirp modulation signals with very fast switching speed. This signal generator delivers an output power of 10 dBm with a power resolution of 0.5 dB and has a frequency step size of more than 100 Hz. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
GNSS Frequency and Time Reference with 10 MHz, 5 MHz, and 1pps Outputs |
Time and Frequency Standard
from Pendulum Instruments
|
The FTR-210R from Pendulum Instruments is a GNSS Frequency and Time Reference that produces 7 standard outputs - 5x 10 MHz and 1x 5 MHz Sine reference outputs for frequency reference and 1x 1 pps time reference output. It has a GNSS disciplined Rubidium clock and supports GPS L1 C/A/L5, Galileo E1 B/C/E5a, GLONASS L1OF, BeiDou B1I/B1C/B2A, NavIC SPS-L5 and QZSS L1 C/A/L5 constellations. |
|
Download Datasheet
Product Details | |
|
|
|
2-Way MLDD Power Divider from 0.5 to 10 GHz |
Power Divider
from KRYTAR
|
The 6005100 from KRYTAR is a 2-Way Power Divider that operates from 0.5 to 10 GHz. This MLDD (matched-line directional divider) has an insertion loss of less than 1dB and an isolation of more than 19 dB. It can handle an input power of 10 W and has a VSWR of less than 1.40:1. This power divider uses an MLDD proprietary design to provide ultra-high performance over a broad frequency range. |
|
Download Datasheet
Product Details | |
|
|
|
|
2-Way Resistive Power Divider/Combiner from DC to 18 GHz |
Power Divider
from JFW Industries
|
The 50PD-922 from JFW Industries is a 2-Way Power Divider/Combiner that operates from DC to 18 GHz. This resistive power divider can handle an input power of 1 W with a VSWR of less than 1.40:1 and has an insertion loss of less than 7 dB. It has an amplitude balance of less than ±0.5 dB and a phase balance of ± 4º. This divider combiner is available in a module that measures 0.59 x 0.71 x 0.37 inches and has SMA–female connectors. |
|
Download Datasheet
Product Details | |
|
|
|
10 dB Directional Coupler from 380 to 960 MHz |
Directional Coupler
from MECA
|
The 715-10-0.670 from MECA is a Directional Coupler that operates from 380 to 960 MHz. This 10 dB coupler has a directivity of more than 25 dB and an insertion loss of less than 0.1 dB. It can handle an average input power of 25 W and a peak input power of 10 kW. This RoHS-compliant coupler is available in a module that measures 6.08 x 2.25 x 0.88 inches with N-type (female) connectors. |
|
Download Datasheet
Product Details | |
|
|
|
90° Hybrid Coupler from 700 to 1000 MHz for Wireless Applications |
90 Degree Hybrid Coupler
from Johanson Technology
|
The 0850HC47A0300001E from Johanson Technology is a 90° Hybrid Coupler that operates from 700 to 1000 MHz. This 3 dB coupler provides an isolation of more than 23 dB and has an insertion loss of less than 0.14 dB. It can handle a CW input power of up to 300 W and has a return loss of 23 dB. This hybrid coupler has an amplitude balance of up to 0.3 dB and a phase balance of 90°. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
High Pass Filter with a Passband from 0.5 to 18 GHz |
RF High Pass Filter
from Quantic PMI (Planar Monolithics)
|
The HP0R5G-18G-CD-SFF-ROHS from Quantic PMI (Planar Monolithics) is a High Pass Filter with a passband from 0.5 to 18 GHz. It has a passband insertion loss of less than 5 dB, provides a rejection of more than 40 dBc below the passband, and has a VSWR of 2.0:1. This RoHS-compliant high pass filter is available in a gold-plated module that measures 1.08 x 0.71 x 0.33 inches and has removable SMA-female connectors. |
|
Download Datasheet
Product Details | |
|
|
|
C-Band Low Noise Amplifier from 4.4 to 5 GHz |
RF Amplifier
from AmpliTech
|
The APT4-04400500-0715-D4-GW from AmpliTech is a C-band Low Noise Amplifier that operates from 4.4 to 5 GHz. It provides an output power of 16 dBm and gain of 35 dB with a noise figure of 0.6 dB. The amplifier requires a supply of 12 Vdc while consuming up to 16 dBm of power. It is available in a module with SMA male/female connectors and is ideal for SATCOM, radar, microwave radio systems and telemetry applications. |
|
Download Datasheet
Product Details | |
|
|
|
|
Color-Coded Torque Wrenches for Coaxial Connectors |
Torque Wrench
from Maury Microwave
|
The TW-Series from Maury Microwave are Color-Coded Torque Wrenches that are designed for tightening coaxial connectors. These wrenches have color-coded bands on their handles to make it easy to select the correct wrench from the toolbox at a glance. They have a "break" design to prevent over-torque in a coupled junction and also allow torque to be applied in either direction. |
|
Download Datasheet
Product Details | |
|
|
|
Real-Time True Average Power Sensor from 4 kHz to 18 GHz |
RF Power Meter & Sensor
from Boonton
|
The RTP4118 from Boonton is a Real-Time True Average Power Sensor that operates from 4 kHz to 18 GHz. It has a dynamic range from -60 to +20 dBm and a continuous sampling rate of 25 MHz. The sensor uses Real-Time Power Processing (RTPP) technology which is a unique parallel processing methodology that performs power measurement at unmatched speeds. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
80 W GaN Power Amplifier Pallet from 5725 to 5850 MHz |
RF Amplifier
from RFHIC
|
The RRP5758065-40 from RFHIC is a GaN Power Amplifier that operates from 5.725 to 5.850 GHz. It delivers a CW output power of 80 W with a power gain of 41 dB and an efficiency of 40%. This power amplifier is fabricated using RFHIC’s GaN high-electron-mobility (HEMT) technology and has a VSWR of less than 2.0:1. It has spurious levels of better than 60 dBc and harmonic levels of 25 dBc. |
|
Download Datasheet
Product Details | |
|
|
|
Space-Qualified Low Phase Noise TCXOs from 20 to 100 MHz |
TCXO
from Q-Tech Corporation
|
The QT8220 Series from Q-Tech Corporation are Space-Qualified Temperature Controlled Crystal Oscillators (TCXOs) that operate from 20 to 100 MHz. They are designed to provide significant Size, Weight, & Power (SWaP) advantages compared to traditional single output TCXOs and can withstand high radiation tolerance. These TCXOs provide up to 4 CMOS output waveforms with a phase noise of less than -130 dBc/Hz (at 1 kHz offset). |
|
Download Datasheet
Product Details | |
|
|
|
Real-Time Spectrum Analyzer with WR-10 Waveguide Interface from 75 to 110 GHz |
RF Spectrum Analyzer
from Aaronia AG
|
The SPECTRAN V6 PLUS XPR 250XB-WR10 from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 75 to 110 GHz and has a WR-10 Waveguide Interface. The waveguide connection allows measurements in the millimeter wave range that are not possible with conventional cables. It is designed to provide a cost-effective development and validation platform for all millimeter-wave applications, including those with the shortest signal transmissions. |
|
Download Datasheet
Product Details | |
|
|
|
2.4 GHz Bluetooth 6.0 Low Energy Module |
RF Module
from KAGA FEI
|
The ES4L15BA1 from Kaga Fei is a Bluetooth 6.0 Module that operates from 2402 to 2480 MHz. It combines a Nordic nRF54L15 chip with a 128 MHz ARM Cortex-M33 processor with TrustZone®, 1.5 MB non-volatile memory, and 256 KB RAM. This module has a RISC-V coprocessor, integrated system clock & high-performance PCB antenna. It supports 2M, 1M, 500k, 125kbps, AoA, AoD, and Channel Sounding Bluetooth features. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Portable Spectrum Analyzer from 5 to 2300 MHz and 5.5 to 6.5 GHz |
RF Spectrum Analyzer
from Avcom
|
The PSA-2500-CTX from AVCOM is a Portable Spectrum Analyzer that operates from 5 to 2300 MHz (input 1) and 5.5 to 6.5 GHz (input 2). It has been designed to perform quick and precise signal investigations and enables technicians to troubleshoot C-band satellite end and 5.8 GHz video/audio signals. This spectrum analyzer has a span width of up to 1300 MHz and a resolution bandwidth of 10/100/300 kHz and 1 MHz. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
Vector Signal Generator from 10 MHz to 6 GHz |
Signal Generator
from Micran
|
The G7M-06 from Micran is a Vector Signal Generator that operates from 10 MHz to 6 GHz. This signal generator is designed to generate continuous harmonic and analog/digital-modulated signals. It uses built-in modulators or oscillators (external oscillator option supported) to produce amplitude, frequency, phase, and pulse modulated signals. |
|
Download Datasheet
Product Details | |
|
|
|
Modular Frequency Synthesizer from 0.5 to 22 GHz |
Frequency Synthesizer
from Crane Aerospace & Electronics
|
The DS-05 from Crane Aerospace & Electronics is a Modular Frequency Synthesizer that operates from 0.5 to 22 GHz. It is tailored for the electronic warfare (EW) market, thus offering exceptional unit performance and functional integration. This frequency synthesizer has a modular design that optimizes cost and enhances performance repeatability. |
|
Download Datasheet
Product Details | |
|
|
|
75 W Linear Power Amplifier from 2.2 to 2.5 GHz |
RF Amplifier
from NuWaves RF Solutions
|
The NW-PA-S-75-C01-S01 from NuWaves is a Linear Power Amplifier that operates from 2.2 to 2.5 GHz. It delivers an RF output power of 75 W and a gain of 18 dB (Tx) & 12 dB (Rx). This amplifier has bidirectional operation and switches between transmit and receive through a DC control input. It can also be configured for Autosense where it automatically switches between transmit and receive based on the RF input power detected at the XCVR Port. |
|
Download Datasheet
Product Details | |
|
|
|
Dual-Duplexed Tower Top Amplifier from 794-806 MHz and 764-776 MHz |
Tower Mount Amplifier
from TX RX Systems
|
The 438-83B-23005 from TX RX Systems is a Dual Duplexed Tower Top Amplifier (TTA) that operates from 794 to 806 MHz (uplink) and 764 to 776 MHz (downlink). This TTA is built to withstand harsh conditions. It consists of Tx/Rx filters, a low noise amplifier (LNA), and lightning protection. On the downlink, it can handle an input power of up to 400 W, has an insertion loss of less than 0.7 dB, and a return loss of 18 dB. |
|
Download Datasheet
Product Details | |
|