| Trending T&M Products . |
|
|
| Portable Analog Signal Generator from 9 kHz to 12/20/26 GHz | |
Signal Generator
from Keysight Technologies
|
| The AP5002A from Keysight Technologies is a Portable Analog Signal Generator that operates from 9 kHz to 12/20/26 GHz. It is designed to accelerate the testing and characterization of electronic or wireless modules either on-site or where the devices are located. This compact signal generator delivers an output power from -120 dBm to +23 dBm and has a frequency step size of 0.001 Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Spectrum Analyzer with WR-10 Waveguide Interface from 75 to 110 GHz | |
RF Spectrum Analyzer
from Aaronia AG
|
| The SPECTRAN V6 PLUS XPR 250XB-WR10 from Aaronia AG is a Real-Time Spectrum Analyzer that operates from 75 to 110 GHz and has a WR-10 Waveguide Interface. The waveguide connection allows measurements in the millimeter wave range that are not possible with conventional cables. It is designed to provide a cost-effective development and validation platform for all millimeter-wave applications, including those with the shortest signal transmissions. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB Programmable Signal Generator from 2 to 8 GHz | |
Signal Generator
from Vaunix
|
| The LMS-802CX from Vaunix is a USB Programmable RF Signal Generator that operates from 2 to 8 GHz. It is designed to allow easy programmability to generate fixed-frequency, unidirectional or bidirectional frequency sweep, pulse modulation, and chirp modulation signals with very fast switching speed. This signal generator delivers an output power of 10 dBm with a power resolution of 0.5 dB and has a frequency step size of more than 100 Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable Mini Compact Range Test System from 4 to 110 GHz | |
Antenna Measurement System
from Microwave Vision Group
|
| The CR-M20 from Microwave Vision Group is a Portable Mini Compact Range Test System that operates from 4 to 110 GHz. It is an all-in-one system that has been designed for cost-effective over-the-air (OTA) testing of microwave and mmWave high-gain antennas and radars. This OTA test system consists of a device under test (DUT) positioner, absorber, reflector system, feed horns, rotator, data analysis workstation, positioned controller, mmWave boxes, RF cables, and vector network analyzer (VNA). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 10 kW RF Power Meter from 2 MHz to 1000 MHz | |
RF Power Meter & Sensor
from Bird
|
| The 4480A from Bird is an RF Power Meter that measures frequencies ranging from 2 MHz to 30 MHz (low band) and 25 MHz to 1000 MHz (high band). It can measure true average power for both Continuous Wave (CW) and digitally modulated signals and has an input power range of 10 W to 10 kW (low band) and 1 W to 1 kW (high band). This power meter has an accuracy of ±4% (±0.18 dB) and an input attenuator range of 0 to 30 dB in 1 dB steps. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4x8 Full Fan-Out Handover Test System from 0.5 to 6 GHz | |
Handover Test System
from JFW Industries
|
| The 50PA-1253 from JFW Industries is a 4x8 Handover Test System that operates from 0.5 to 6 GHz. It has a full fan-out configuration with bi-directional ports and can handle an input power of 33 dBm (IN ports) and 30 dBm (OUT ports). This handover system provides an attenuation range from 0 to 63.5 dB in 0.5 dB steps and has a switching time of 4 µs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Smart Power Sensor from 50 to 9000 MHz | |
RF Power Meter & Sensor
from Mini Circuits
|
| The PWR-9PWHS-RC is a Smart Power Sensor that operates from 50 to 9000 MHz. It can measure modulated signals up to a bandwidth of 30 MHz and has a sample rate of up to 80 Msps with an internal buffer that enables up to 120,000 measurements per second. This power sensor has a power measurement range of up to 80 dB with a measurement resolution of 0.001 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Vector Signal Generator from 10 MHz to 6 GHz | |
Signal Generator
from Micran
|
| The G7M-06 from Micran is a Vector Signal Generator that operates from 10 MHz to 6 GHz. This signal generator is designed to generate continuous harmonic and analog/digital-modulated signals. It uses built-in modulators or oscillators (external oscillator option supported) to produce amplitude, frequency, phase, and pulse modulated signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Portable Spectrum Analyzer from 5 to 2300 MHz and 5.5 to 6.5 GHz | |
RF Spectrum Analyzer
from Avcom
|
| The PSA-2500-CTX from AVCOM is a Portable Spectrum Analyzer that operates from 5 to 2300 MHz (input 1) and 5.5 to 6.5 GHz (input 2). It has been designed to perform quick and precise signal investigations and enables technicians to troubleshoot C-band satellite end and 5.8 GHz video/audio signals. This spectrum analyzer has a span width of up to 1300 MHz and a resolution bandwidth of 10/100/300 kHz and 1 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Standalone Portable Shield Test Box for WLAN Device Testing up to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-509645 from RF Electronics is a Standalone RF Shield Test Box with a frequency range from 20 MHz to 12 GHz. It is designed and developed for WLAN (802.11a/b/g/n/ac/ax/be) testing, Bluetooth, RFID, 3G, 5G device testing, and testing of wireless devices. This shield box has thick absorbing foam that deadens standing waves and reflections. |
| |
Product Details | |
|
|
|
| 16-Port VNA from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN0916 from Copper Mountain Technologies is a 16-Port VNA that operates from 300 kHz to 9 GHz. It is also available in 6, 8, 10, 12, 14 port configurations. This VNA can measure all S-parameters. It has a measurement speed of 24 μs and 2 to 500,001 measurement points per sweep. This VNA has a dynamic range of 140 dB and an output power adjustment range of -45 to +10 dBm with a noise floor of less than -138 dBm/Hz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Remote Spectrum Monitors from 9 kHz to 54 GHz | |
RF Monitoring Receiver
from Anritsu
|
| The MS2720xA from Anritsu are Remote Spectrum Monitors that operate from 9 kHz to 9/14/20/26.5/32/43.5/54 GHz. They use the latest technologies to deliver accuracy and precision in measurements previously reserved only for benchtop instruments. These modules consist of a real-time spectrum analyzer (RTSA) that has a measurement bandwidth of 110 MHz and a point of intercept (POI) time of 2.05μs. |
| |
Download Datasheet
Product Details | |
|
|
|
| Single-Channel Direction Finding Antenna from 20 MHz to 8.5 GHz | |
Direction Finding Antenna
from Rohde & Schwarz
|
| The R&S ADD597 from Rohde & Schwarz is a Single-Channel Direction-finding (DF) Antenna that operates from 20 MHz to 7.5 GHz with horizontal polarization and up to 8.5 GHz with vertical polarization. This antenna offers dual-polarization capability and has multi-element antenna arrays with superior DF accuracy and immunity to reflections. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2/4-Port Vector Network Analyzers from 100 kHz to 13.5/26.5 GHz | |
Vector Network Analyzer
from SIGLENT
|
| The SNA6000A Series from Siglent are 2/4-Port Vector Network Analyzers (VNA) that operate from 100 kHz to 13.5/26.5 GHz with a frequency resolution of 1 Hz. They have a dynamic range of 135 dB and a level resolution of 0.05 dB. These VNAs provide instantaneous measurement results of parameters such as Q-factor, bandwidth, and insertion loss, as well as insights into scattering, differential, and time-domain measurements. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4 Channel USB Powered Oscilloscopes with up to 500 MHz Bandwidth | |
Oscilloscope
from Pico Technology
|
| The PicoScope 3000E Series from Pico Technology are Oscilloscopes with a bandwidth of up to 500 MHz. They have four analog channels with 10-bit resolution (14 bits using enhanced resolution). These oscilloscopes deliver a sampling rate of up to 5 GS/s and have a 200 ms capture time at 5 GS/s with up to 2 GS capture memory. They have a 200 MS/s 14-bit AWG and 8-bit to 12-bit FlexRes ADC. |
| |
Download Datasheet
Product Details | |
|
