1. everything RF
  2. RF Newsletters
more
PREV 25 July, 2022 NEXT

Latest News & White Papers this Week

25 July, 2022 Newsletter - everything RF

Top stories this week. View it in your browser

 
Weekly Edition
Date: 25 July, 2022
 
Sponsored by AT Microwave
 
 
Latest News this Week
Qorvo Completes MFi Certification of UWB Solutions for Interoperability with the Apple U1 Chip - Qorvo
Rohde & Schwarz Introduces Test Solution for On-Wafer RF Device Characterization - Rohde & Schwarz
Signal Hound Introduces 1 GHz Phase Noise Clock Standard for Testing Spectrum Analyzer Performance - Signal Hound
NI in Cooperation with Ansys Showcases Satellite Link Emulator at the Farnborough Air Show 2022 - National Instruments Corporation
Collins Aerospace has Developed an Advanced Digital Airborne Receiver-Transmitter for TACAN Systems - Collins Aerospace
These SMA Connectors Plated in Black Chrome Assure a Fully Non-reflective Surface - SV Microwave
Quantum Microwave Introduces Cryogenic Infrared (IR) Filters for Quantum Computing - Quantum Microwave
Advanced Radar Environment Simulators Provide Cost-Effective Alternatives to Flight Testing - Mercury Systems
Pegatron Using MVG's Multi-Probe Test System to Accelerate Antenna and OTA Testing Procedures - Microwave Vision Group
Mercury to Provide Radar Testing Systems for Leonardo - Mercury Systems
ANYWAVES Selected by Airbus Defense and Space to Develop Antennas for 15 Satellites - Airbus Group SE
Airtel Deploys India’s First Private 5G Network at a Bosch Facility in Bengaluru - Airtel
More News
Sponsored by AT Microwave
Amplifier
Broadband Amplifier Modules from 10 MHz to 70 GHz
AT Microwave provides super broaband amplifier modules from 10 MHz to 26.5/43.5/50/70 GHz. The modules can be designed to have a gain from 10 to 60 dB with output power from 0 to +33 dBm. Connectors types available include SMA, 2.92mm, 2.4mm and 1.85mm. Click here to learn more.
New White Papers & Articles
Synchronization of Signal Processing in Multiple RF Data Converter Subsystems - Xilinx
SDR-Boosting the Flexibility of RF Communication - Mouser
Rethinking IoT Device Development with Virtual Antenna Technology - ABI Research
Direct to Microwave Signal Generation and Acquisition - Tabor Electronics
Increasing Realism in Auto Radar Drive Scenario Simulation with Multipath, Diffuse Scattering, and Micro-Doppler - Remcom
The Impact of Frequency in Non-Contacting Radar Level Measurement - Emerson Network Power Connectivity Solutions
More Whitepapers
Upcoming Event
Event Image
EMC+SIPI 2022
Date: 1 to 5 August, 2022
Location: Spokane, Washington
More Events
Featured Products this Week
RF Transistor
15 W GaN-on-SiC HEMT from DC to 8 GHz
RF Transistor  from Gallium Semiconductor

The GT010D from Gallium Semiconductor is a GaN-on-SiC HEMT that operates from DC to 8 GHz. It delivers a saturated output power of 15 W with a gain of up to 18.5 dB and a maximum drain efficiency of 64%. This transistor supports both linear and pulsed mode operations. It is available in a surface-mount plastic DFN package that measures 6 x 3 mm and requires a DC supply of 50 V.
Download Datasheet Product Details
RF Amplifier
20 W GaN-on-SiC Power Amplifier MMIC from 10.7 to 12.7 GHz
RF Amplifier  from Qorvo

The QPA1009 from Qorvo is a Power Amplifier that operates from 10.7 to 12.7 GHz. It delivers an output power of 19.95 W (~43 dBm) with a small signal gain of 21 dB and power-added efficiency (PAE) of 33%. This MMIC amplifier is fabricated on Qorvo’s production 0.15 um GaN-on-SiC process (QGaN15) and supports a wide range of operating conditions, including CW operation, making it well-suited for both commercial and military systems.
Download Datasheet Product Details
Vector Network Analyzer
2-Port Vector Network Analyzer from 100 kHz to 18 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The S5180B from Copper Mountain Technologies is a 2-Port Vector Network Analyzer that operates from 100 kHz to 18 GHz. It has a built-in pulse modulator, synchronizer, and a set of logical generators supporting various pulse generation options and corresponding measurement modes. Pulses can be generated Synchronously or Asynchronously with respect to VNA measurement timing.
Download Datasheet Product Details
EMF Meter / Antenna
Laser-Powered Electric Field Probe Kit from 20 MHz to 60 GHz
EMF Meter / Antenna  from AR RF/Microwave Instrumentation

The FL8060 from AR RF/Microwave Instrumentation is an Electric Field Probe Kit that can be used from 20 MHz to 60 GHz. It has been specifically designed for EMC radiated immunity testing in the automotive, wireless, military, and aviation industry. The probe kit has a separable-axis field probe, capable of measuring CW, AM, and Pulsed signals.
Download Datasheet Product Details
RF Amplifier
100 W CW/Pulsed Rack-Mount SSPA from 18 to 26.5 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP4065A-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 26.5 GHz. It delivers a CW/Pulsed output power of 100 W with more than 50 dB of gain. This class A/AB linear design amplifier provides high-efficiency and reliability and has been developed to replace aging TWT technology.
Download Datasheet Product Details
GNSS Anti-Jamming Solution
Digital Beamforming GPS Anti-Jamming System
GNSS Anti-Jamming Solution  from Collins Aerospace

The MSAS-100 from Collins Aerospace is a Digital Beamforming GPS Anti-Jamming System for military applications. It supports 24 simultaneous steered beams to provide superior jamming immunity in the most severe GPS-challenged environments. The system consists of high-performance ground GPS antijam antenna electronics with an integrated, seven-element CRPA antenna.
Download Datasheet Product Details
Sponsored by AT Microwave
 
 
RF Amplifier
400 W X-Band GaN Solid-State Power Amplifier for Radar Applications
RF Amplifier  from KRATOS General Microwave

The SGN-X3-400 from Kratos is a Solid-State Power Amplifier that operates in the X-band with a bandwidth of up to 9%. This amplifier delivers a saturated output power of more than 400 W with a small signal gain of 70 dB and has an efficiency of 20%. It has a maximum pulse width of 256 µs and a duty cycle of up to 20%.
Download Datasheet Product Details
Handover Test System
48x6 Full Fan-Out Handover Test System from 700 to 3000 MHz
Handover Test System  from JFW Industries

The 50PA-904 from JFW Industries is a 48x6 Handover Test System that operates from 700 to 3000 MHz. This handover test system has bi-directional ports and a full fan-out configuration i.e. every path has its own attenuator. Each path has an attenuation range from 0 to 95 dB in 1 dB steps, a power divider isolation of more than 21 dB, and a switching speed of 5 ms.
Download Datasheet Product Details
RF Switch
SP12T PIN Diode Switch from 100 MHz to 20 GHz
RF Switch  from Fairview Microwave

The FMSW2034 from Fairview Microwave is an Absorptive SP12T PIN Diode Switch that operates from 100 MHz to 20 GHz. It can handle up to 0.5 W of input power and has an insertion loss of less than 6 dB. This PIN diode switch provides more than 65 dB of isolation and has a switching time of less than 100 ns.
Download Datasheet Product Details
Horn Antenna
15 dBi Horn Antenna from 2 to 18 GHz
Horn Antenna  from NSI-MI Technologies

The ANT-BHA-2-18 from NSI-MI Technologies is a Horn Antenna that operates from 2 to 18 GHz. This dual-linearly polarized antenna provides a peak gain of 15 dBi and has a VSWR of less than 2.5:1. It can handle an input power of up to 25 W and provides port-to-port isolation of 25 dB. The antenna is designed to maintain a consistent radiation pattern and VSWR across the complete frequency bandwidth.
Download Datasheet Product Details
RF Inductor
Low Profile Wire-wound Ferrite Chip Inductors from 20 to 560 nH
RF Inductor  from Coilcraft

The 0402FL Series from Coilcraft are Wire-wound Ferrite Chip Inductors with inductance values from 20 to 560 nH. These chip inductors have a low profile of 0.55 mm, which is 10% lower than competitive inductors. They were developed for cellular applications for use either as filter elements, as one-pole filters, or as RF chokes in the cellular bands, and are great for use in mobile and infrastructure equipment.
Download Datasheet Product Details
Low Noise Block
Military Standard Low Noise Block from 19.2 – 22.2 GHz
Low Noise Block  from ACORDE

The ACLNBS-Ka-Ex-V3 from ACORDE is a Ka-Band Low Noise Block that down-converts an input frequency from 19.2 – 22.2 GHz (RF) to an output frequency from 950 – 2000 MHz (IF). It provides 60 dB of gain with a noise figure of less than 1.5 dB and more than 45 dB of image rejection. This LNB has in-band spurious levels of -60 dBc and phase noise of -95 dBc at 100 kHz offset.
Download Datasheet Product Details
Power Divider
4-Way Resistive Power Divider from 6 to 40 GHz
Power Divider  from MECA

The 804-3-23.000 from MECA is a 4-way resistive power divider that operates from 6 to 40 GHz. The divider can handle up to 30 Watts of power, has an insertion loss of less than 2.6 dB, more than 14 dB of isolation, and a VSWR of less than 1.80:1. It is available in a module with 2.92 mm female connectors.
Download Datasheet Product Details
RF Spectrum Analyzer
Handheld Spectrum Analyzer from 16 to 26.5 GHz
RF Spectrum Analyzer  from SAF Tehnika

The J0SSAP53 from SAF is a Compact Handheld Spectrum Analyzer that operates from 6 to 20 GHz. It supports continuous and manual sweep functions and has a real-time bandwidth of up to 1 MHz. The analyzer has a frequency resolution of 100 kHz and an amplitude accuracy of ±1 dBm.
Download Datasheet Product Details
Direction Finding System
6 GHz Mobile Direction Finding System
Direction Finding System  from Rohde & Schwarz

The R&S®DDF550 from Rohde & Schwarz is a Direction Finding System that can be used to find signals up to 6 GHz. It has a real-time bandwidth of 80 MHz and has excellent DF scan speed as well as high DF accuracy, sensitivity and immunity to reflections. The direction finder has active/passive switchable antennas that allow users to select higher sensitivity (active) or higher immunity to strong signals (passive).
Download Datasheet Product Details
Between Series RF Adapter
1.0 mm to 1.85 mm RF Adapters from DC to 67 GHz
Between Series RF Adapter  from Jyebao

The ADS 1.0-1.85-1.25 Series from Jyebao are 1.0 mm to 1.85 mm Adapters that operate from DC to 67 GHz. They have an insertion loss of 0.05 x vf (GHz) dB and a VSWR of less than 1.25:1. These adapters can handle up to 150 Vrms and have a dielectric withstanding voltage of 500 V. They are available in stainless steel 1.0 mm to 1.85 mm plug to plug, plug to jack, jack to plug and jack to jack connector configurations.
Download Datasheet Product Details
RF Module
2.4 GHz Proprietary/Bluetooth LE 5.1 Radio Module
RF Module  from Wurth Elektronik

The Setebos-I from Wurth Elektronik is a 2.4 GHz Radio Module with configurable Proprietary/Bluetooth LE 5.1 modes. It uses the nRF52840 SoC from Nordic Semiconductors and can work as a Thyone-I module (proprietary mode) or a Proteus-III module (BLE 5.1 mode). The module delivers an RF bitrate of up to 2 Mbps and has a line-of-sight range of 600 m.
Download Datasheet Product Details
GNSS Module
GPS/QZSS Receiver Module for Broad-Market Applications
GNSS Module  from OriginGPS

The ORG4472 from OriginGPS is a GPS Receiver Module for GPS and QZSS constellations with SBAS (WAAS, EGNOS, MSAS) support. It is a miniature multi-channel receiver that continuously tracks all satellites in view and provides accurate positioning data in standard NMEA format. The internal ARM CPU core and sophisticated firmware keep GPS payload off the host and allow integration in low resources embedded solutions.
Download Datasheet Product Details
RF Amplifier
MMIC Low Noise Amplifier from 10 to 30 GHz
RF Amplifier  from Mini Circuits

The PMA3-34GLN+ from Mini-Circuits is a Low Noise MMIC Amplifier that operates from 10 to 30 GHz. It provides more than 18 dB of gain with a noise figure of less than 2.4 dB and has a P1dB of 11 dBm. This LNA provides a unique combination of high gain and low noise figure over a very broad bandwidth making it ideal for use as a first stage driver amplifier in receiver applications.
Download Datasheet Product Details
Fixed Attenuator
Surface-Mount Fixed Attenuators from DC to 26.5 GHz
Fixed Attenuator  from SemiGen

The 01311 Series from SemiGen are Fixed Attenuators that operate from DC to 26.5 GHz. They are available with attenuation values from 1 to 20 dB with an accuracy of ±0.3 dB. These thin-film attenuators are made of Fused Silica (quartz) dielectric substrates. This technology provides full edge wrap metal for SMT installation with a complete grounded backside for ease in attachment, eliminating the need for additional ground bonding.
Download Datasheet Product Details
RFID Tag
RFID Inlay for Case, Pallet, and Asset Tracking Applications
RFID Tag  from Zebra

The ZBR2000 from Zebra is an RFID Inlay that operates from 865-868 MHz (ETSI) and 902-928 (FCC). It has a read range of up to 17 meters in free space. This inlay has a read sensitivity of up to -23 dBm and a write sensitivity of up to -18 dBm. The inlay is based on NXP’s UCODE 8 chip and has an EPC memory of 128 bits and a TID memory of 96 bits (48 bit unique).
Download Datasheet Product Details
Base Station Antenna
8-Port Base Station Antenna from 698 – 960/1695 – 2690 MHz
Base Station Antenna  from CellMax Technologies

The 12086x from CellMax is an 8-Port Base Station Antenna that operates from 698 – 960 MHz and 1695 – 2690 MHz. This cross-polarized antenna provides more than 18.5 dBi of gain and offers more spectrum and higher capacity to the subscribers located at the cell edge (indoor or physical cell edge). It has a horizontal beamwidth of 65°, a front-to-back ratio of more than 25 dB, and passive intermodulation @ 2x20 W of -155 dBc.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. We provide the latest news, information on new product releases, upcoming events, white papers, articles and much more.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]