1. everything RF
  2. RF Newsletters
more
PREV 27 July, 2022 NEXT

New RF and Microwave Products this Week

27 July, 2022 Newsletter - everything RF

New products this week. View it in your browser

 
Weekly Edition
Date: 27 July, 2022
 
Sponsored by APITech
 
 
New RF and Microwave Products this Week
RF Amplifier
10 W GaN Amplifier MMIC from 37.5 to 42.5 GHz
RF Amplifier  from Qorvo

The QPA4246D from Qorvo is a Power Amplifier that operates from 37.5 to 42.5 GHz. It delivers a saturated output power of 10 W (~40 dBm) with a small signal gain of 16 dB and power-added efficiency (PAE) of 17%. This MMIC amplifier is fabricated on Qorvo’s production 0.15 um GaN-on-SiC process (QGaN15). It requires a DC supply of 24 V and consumes 280 mA of current.
Download Datasheet Product Details
Cryogenic Infrared (IR) Filters
Cryogenic Infrared (IR) Filters for Quantum Computing
Cryogenic Infrared (IR) Filters  from Quantum Microwave

The QMC-CRYOIRF Filters from Quantum Microwave have been developed for Quantum Computing coaxial lines to eliminate high frequency noise above the Qubit Frequency Ranges. The low frequency versions to pass DC to 700 MHz and high frequency models to pass DC to 6 GHz. They are capable of operating at temperatures of 10 mK. The filters have very low attenuation in the passband and very high attenuation above the passband. They are used in superconducting Quantum Computers.
Download Datasheet Product Details
RF Test Set
Scanning Receiver Supports sub-8 GHz and mmWave Frequency Bands
RF Test Set  from PCTEL

The Gflex® from PCTEL is a Scanning Receiver for multi-operator 2G/3G/4G/5G testing. It supports frequencies from 10 MHz to 8 GHz (Sub-8 GHz) and 24.26 – 44 GHz/47.2 – 48.2 GHz (mmWave) to measure up to 120 5G channels. This receiver supports every 5G band defined in the 3GPP release 17 specification and can measure the entire 100 MHz 5G bandwidth.
Download Datasheet Product Details
RF Spectrum Analyzer
Real-Time Spectrum Analyzers for 5G mmWave Networks
RF Spectrum Analyzer  from ThinkRF

The R5750 from thinkRF is a Real-Time Spectrum Analyzer with a frequency range from 9 kHz to 27 GHz with real-time bandwidth of 0.1 Mhz / 10 MHz / 40 MHz / 100 MHz. These Analyzers have reduced SWaP requirements & networkability which is ideal for 5G network testing that often requires multiple analyzers to capture signals over a geographic area.
Download Datasheet Product Details
Vector Network Analyzer
1-Port USB Vector Network Analyzer from 1 MHz to 18 GHz
Vector Network Analyzer  from Copper Mountain Technologies

The R180 from CMT is a handheld 1-Port VNA that provides lab grade performance from 1 MHz to 18 GHz. This 1-Port VNA (Cable and Antenna Analyzer) can connect directly to the DUT, as a result of which it has excellent measurement accuracy by eliminating the practical limitation of test cables. The R180 can be controlled and powered through a USB-C port or through an external 5 VDC power supply.
Download Datasheet Product Details
Phase Noise Analyzer
10 MHz to 6 GHz (Optional to 24 GHz) Real-Time Phase Noise Analyzer
Phase Noise Analyzer  from Holzworth Instrumentation

The HA7062C from Holzworth is a real-time fully integrated phase noise analysis system that operates from 10 MHz to 6 GHz. It provides accuracy, high reliability, automation and flexibility with extremely fast measurement speeds to reduce the product development time and/or optimize ATE manufacturing throughput.
Download Datasheet Product Details
Sponsored by APITech
APITech
APITech’s GPS LNA maximizes out-of-band rejection, minimizes system noise in a small footprint
GPS LNA leverages core competencies in low-loss filters, amplifiers & mechanical design. Options include GPS band config., gain level, supply voltage w/multiple outputs & connectors. Designed for EW, satellite & marine navigation, and survey mapping. Click here to learn more.
RF Test Set
Test System to Verify RF Parameters of 5G NR Devices
RF Test Set  from Keysight Technologies

The S8714A from Keysight Technologies is a 5G Test Solution that can verify the RF performance of 5G NSA and SA devices with built-in 3GPP test cases. It automatically configures parameters according to 3GPP TS 38.521 for measurement and also allows quick modification of parameters essential for RF testing such as channel, band, and bandwidth.
Download Datasheet Product Details
Fixed Attenuator
30 dB Low-PIM RF Attenuator from 400 MHz to 13 GHz
Fixed Attenuator  from RD Microwaves

The AT-A69 from RD Microwaves is a Low-PIM RF Attenuator that operates from 400 MHz to 13 GHz. It is available in attenuation options of 10, 20, and 30 dB with an attenuation accuracy of ±1.4 dB. This attenuator can handle an input power of 250 W and has a PIM better than -160 dBc (2x43 dBm @ 1900 MHz). It is available in a module with N-type (female) input and output connectors.
Download Datasheet Product Details
RF Duplexer
10 W Helical Duplexer from 225 – 242 / 248 – 270 MHz
RF Duplexer  from ChengDu Leader Microwave Technology

The LDX-225/248-2S from ChengDu Leader Microwave Technology is a Helical Duplexer that operates from 225 to 242 MHz (Rx) and 248 to 270 MHz (Tx). It can handle an input power of up to 10 W, has an insertion loss of less than 2.5 dB, and provides more than 50 dB of rejection. This duplexer is available in a module that measures 140 x 90 x 37 mm with SMA-female connectors.
Download Datasheet Product Details
RF & Microwave Circulator
Coaxial Circulators from 10 MHz to 20 GHz
RF & Microwave Circulator  from UIY Inc.

The coaxial circulators from UIY operate from 10 MHz to 20 GHz. They have an insertion loss of below 1.2 dB, isolation of over 14 dB, and can handle up to 600 watts of forward power. These circulators are available in a module with N-type / SMA connectors as standard and can also be customized on order. They are suitable for Military, Space & Commercial applications.
Download Datasheet Product Details
GNSS Module
Low-Power Multi-Constellation GNSS Antenna Module
GNSS Module  from u-blox AG

The SAM-M10Q from u-blox is a GNSS Patch Antenna Module that supports the concurrent reception of four GNSS Constellations (GPS, GLONASS, Galileo, and BeiDou). It provides exceptional sensitivity and fast acquisition times for all L1 GNSS systems. This module has a front-end SAW filter and an integrated LNA to ensure excellent out-band jamming immunity.
Download Datasheet Product Details
V2X Module
5G NR Sub-6 GHz + C-V2X Modules for Automotive Applications
V2X Module  from Quectel

The AG55xQ Series from Quectel are 5G NR Sub-6 GHz + C-V2X Modules that are designed for automotive applications. They adopt 3GPP Rel-15 technology and support both 5G NR NSA and SA modes. These modules are based on the AEC-Q100 qualified Qualcomm SA515M chipset and deliver a downlink data rate of up to 2.4 Gbps (5G NSA), 1.6 Gbps (LTE-A), and an uplink data rate of up to 550 Mbps (5G NSA), 200 Mbps (LTE-A).
Download Datasheet Product Details
Sponsored by APITech
 
 
Wireless SoC
Highly-Integrated 2.4 GHz Bluetooth® 5.2 Low Energy SoC
Wireless SoC  from Renesas

The DA14701 from Renesas is a 2.4 GHz Bluetooth 5.2 SoC that supports Bluetooth® low energy as well as other 2.4 GHz protocols. This SoC integrates advanced power management functionality, a Graphics Processing Unit (GPU) for advanced graphics processing, a cryptographic security engine, analog, and digital peripherals, a dedicated sensor node controller, and a software configurable protocol engine with a radio that is compliant with the Bluetooth® 5.2 low energy standard.
Download Datasheet Product Details
RF Shielded Test Enclosure
RF Shield Test Box from 20 MHz to 12 GHz
RF Shielded Test Enclosure  from RF Electronics

The HDRF-1070-C from RF Electronics is an RF Shield Test Box for frequencies from 20 MHz to 12 GHz. It has thick RF absorbing foam which deadens standing waves and reflections and provides shielding of more than 90 dB across the frequency range. This test box is equipped with shielded power filters for power connection in the box while still blocking all wireless signals.
Download Datasheet Product Details
TCXO
26 MHz CMOS TCXO for Emergency Beacon Applications
TCXO  from Dynamic Engineers

The TCXO5300BT-CS-26MHz-A from Dynamic Engineers is a TCXO with an operating frequency of 26 MHz. It provides a CMOS output with a phase noise of -155 dBc/Hz @100KHz offset and has frequency stability of ±0.2 ppm over its operating temperature range from -40°C to +55°C. The oscillator requires a DC supply of 3.3 V and consumes a steady current of less than 3.2 mA.
Download Datasheet Product Details
Microwave Generator
1.6 kW GaN SSPA Based Microwave Generator from 2.4 to 2.5 GHz
Microwave Generator  from RFHIC

The RIM251K6-20G from RFHIC is a GaN SSPA based Microwave Generator that operates from 2400 to 2500 MHz. It delivers an adjustable output power from 100 to 1600 W with an efficiency of up to 55%. The generator uses GaN-on-SiC HEMT transistors that provide excellent thermal stability and efficiency for high-power applications.
Download Datasheet Product Details
Receiver
VHF Omni Ranging/Instrument Landing System (VOR/ILS) Receiver
Receiver  from Collins Aerospace

The AN/ARN-147(V) from Collins Aerospace is a Receiver System that combines all VHF Omni Ranging/Instrument Landing System (VOR/ILS) functions into one system. It operates from 108 to 117.95 MHz and has a militarized VHF navigation receiver that provides optional internal MIL-STD-1553B capability.
Download Datasheet Product Details
RF Amplifier
100 W Rack-Mount Solid-State Power Amplifier from 26.5 to 40 GHz
RF Amplifier  from Exodus Advanced Communications

The AMP4066A-1LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 26.5 to 40 GHz. It delivers a CW/pulsed saturated output power of 100 W with a power gain of more than 50 dB. This Class A/AB linear design amplifier is equipped with built-in protection circuits to prevent short-circuit-related damages and provides extensive monitoring of parameters such as VSWR, power (Watts and dBm), voltage, current, and temperature.
Download Datasheet Product Details
RF Amplifier
500 W Solid-State Amplifier from 0.7 to 6 GHz
RF Amplifier  from AR RF/Microwave Instrumentation

The 500S1G6A from AR RF/Microwave Instrumentation is a Solid-State Amplifier that operates from 0.7 to 6 GHz. It delivers an output power of more than 500 W (when used with a sweep generator) with a gain of over 57 dB. The amplifier has low levels of spurious signals and high linearity, making it suitable for use as a driver amplifier in testing wireless and communication components and subsystems. It is also suitable for EMC Test applications where undistorted modulation envelopes are required.
Download Datasheet Product Details
Digital Attenuator
95 dB Programmable Solid-State Attenuator from 200 MHz to 8 GHz
Digital Attenuator  from JFW Industries

The 50P-2109 from JFW Industries is a Solid-State Programmable Attenuator that operates from 200 MHz to 8 GHz. It can provide attenuation from 0 to 95 dB in 1 dB steps and has a switching speed of less than 1 µs. The attenuator can be controlled via TTL logic - Low for Thru Path (+0 to +0.8 Vdc) and High for Attenuation (+2 to +5 Vdc). It can handle an input power of up to 25 dBm and has an insertion loss of less than 7 dB. The attenuator requires a DC supply of 5 V and consumes 2 mA of current.
Download Datasheet Product Details
RF Inductor
Wire-Wound Ceramic Chip Inductors from 0.45 to 24 nH
RF Inductor  from Coilcraft

The 016008C Series from Coilcraft are Ceramic Chip Inductors with inductance values from 0.45 to 24 nH. These wire-wound inductors have a DC resistance of less than 1550 mOhms and can handle up to 550 mA of RMS current @ 25°C. They have a higher Q-factor than their thin-film counterparts, making them suitable for high-frequency applications in cell phones, wearable devices, and LTE or 5G IoT networks
Download Datasheet Product Details
RF Connector
Black Chrome-Finished SMA Cable Connectors from DC to 18 GHz
RF Connector  from SV Microwave

The Black Chrome SMA Connectors from SV Microwave are Cable Connectors that operate from DC to 18 GHz. They are designed for 0.085-inch cables and can withstand an RMS dielectric voltage of 1000 V. These SMA connectors have a non-reflective black chrome finish and are ideal for military, aerospace, field communications equipment, and panel mounting applications.
Download Datasheet Product Details
VSAT Terminal
Motorized Manpack Antenna Terminals from 7.25 to 31 GHz
VSAT Terminal  from ReQuTech AB

The PICO120 Series from Requtech are Motorized Manpack Antenna Terminals that operate in the X, Ku, and Ka-bands from 7.25 to 31 GHz. These linearly/circularly polarized antennas provide a Tx gain of up to 49.6 dBi and an Rx gain of more than 38 dBi. The system comprises of an antenna system, control unit, and choice of hard or soft casing along with feed chain filters, polarizers, and related microwave parts.
Download Datasheet Product Details
RF Spectrum Analyzer
Wi-Fi 6/6E Spectrum Analyzer Supports 2.4/5/6 GHz Bands
RF Spectrum Analyzer  from Oscium

The WiPry Clarity from Oscium is a company spectrum analyzer for Wi-Fi 6/6E Applications. It has a tri-band Omni-directional antenna and supports frequencies from 2.4-2.5 GHz, 5.145-5.860 GHz & 5.925-7.125 GHz. This spectrum analyzer includes features such as grade channeling and play/record which is helpful in capturing intermittent issues.
Download Datasheet Product Details
Antenna
2.4/5 GHz Wi-Fi Band Switched Beam Antenna
Antenna  from COJOT

The SBA2456DB from Cojot is a Dual-Band Switched Beam Antenna that operates in the 2.4/5 GHz Wi-Fi bands from 2400-2500 MHz and 5000-6000 MHz. This vertically polarized antenna provides 14 dBi of gain and has a VSWR of less than 2.5:1. It has a 3 dB beamwidth of up to 45° in the H-plane and 30° in the E-plane.
Download Datasheet Product Details
About everything RF
everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]