|
 New Amplifiers for Cellular, Military and Test & Measurement |
|
|  | 4G Amplifier Module from Triquint The TQP9059S is a matched multimode multiband Power Amplifier Module that supports Quad-band GSM/EDGE, W/CDMA & LTE Bands. The GSM PA output power is controlled by a Vramp input from the transceiver in GMSK modes, while for 8PSK operation Vramp is used to optimize current consumption and linearity. The 2-Gain state WCDMA PA operates in LPM and HPM to maximize talk time over the entire range of operating conditions. Download Datasheet | Product Details
|
| | |
|
|  | Cellular Amplifier from Mini Circuits The ZX60-P105LN+ is a high dynamic range amplifier that operates from 40 to 2600 MHz. It provides a gain of 15 dB ± 0.25 dB over its operation band and has a noise figure of under 1.9 dB. The amplifier has a high IP3 of 39 dBm and is unconditionally stable. It is ideal for wireless infrastructure, portable wireless devices, CATV and LTE applications. Download Datasheet | Product Details
|
| | |
|
|  | LTE Amplifier from Parsec Technologies, Inc. The PT683-3 from Parsec Technologies is a GaAs Low Noise Amplifier which operates from 450 to 2000 MHz. It provides a gain of 24 dB, an OIP3 of 32.85 dBm and a noise figure of 0.82 dB. This GaAs based amplifier has an active bias-enable pin that provides external feedback for maximum design flexibility. It is ideally suited for GSM/CDMA based Femto/Picocell, telematics, and wearable applications. Download Datasheet | Product Details
|
| | |
|
|  | GaN Amplifier from RFHIC The TG1000-10 from RFHIC is a GaN hybrid power amplifier which operates from 100 to 1000 MHz. It provides 38 dbm of power(P1dB) with a gain of 15 dB and an efficiency of 55%. It requires a 28 V supply and is ideal for radio systems, TRS, rf sub-systems and base station applications. The TG1000-10 is housed in a surface mount package which measures 15 x 10 x 5.4 mm. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from MACOM The MAAM-011117 is a broadband amplifier solution for CPE Front End applications. It Operates over a 50-2700 MHz frequency range and incorporates a power-down function in order to minimize power consumption during stand-by mode. The MAAM-011117 is packaged in an 8 lead 2mm x 2mm plastic package that incorporates a number of off-chip components resulting in a highly integrated solution for space constrained front-ends. Download Datasheet | Product Details
|
| | |
|
|
|  | RF Amplifier from Miteq The AMF-2F-00020050-20-28P from Miteq is a low noise, wideband amplifier that operates from 20 to 500 MHz. This LNA has a 28 dBm P1dB, 35 dB of gain and a noise figure of under 2 dB. It requires a 15 V supply and draws 500 mA of current. The AMF-2F-00020050-20-28P is available in a compact coaxial aluminum alloy module that provides excellent thermal performance in addition to being very small and lightweight. Download Datasheet | Product Details
|
| | |
|
|  | GaN Amplifier from Hittite The HMC1087 is an 8 W Gallium Nitride (GaN) MMIC Power Amplifier which operates between 2 and 20 GHz with a small signal gain of 11 dB. The Amplifier provides 39 dBm of saturated power, a 45 dBm OIP3 and 29 dBm output power per tone. It requires a 28 V DC supply and draws 850 mA of current. It is matched to 50 Ohms at the input and output. It is ideal for use in Test Instrumentation, general communications and radar applications. Download Datasheet | Product Details
|
| | |
|
|  | Military & Aerospace Amplifier from RF-Lambda The RFLUPA01050 is a wideband medium power amplifier than operates from 10 to 500 MHz. It has an input power limit of 18 dBm, a P1dB of 2 W and 20 dB of Gain. The amplifier has requires a 15 V supply and draws 600 mA of current. The RFLUPA01050 can operate at a temperature from -40 to 85 Degrees C (Forced cooling might be required), it can withstand up to 30G of shock and vibration of 16.2 g RMS . It is ideal for Wireless Infrastructure, Aerospace and Military Applications. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Planar Monolithics Industries The PA-40-17D521D5-5R0-36-12-292FF from PMI is a power amplifier which operates from 15.7 to 21.5 GHz. It provides up to 36 dBm of power(P1dB), a gain of 40 dB with a flatness of 1.75 dB and a noise figure of 5 dB. It has spurious of -60 dBc and requires a 9 to 12 V DC supply. The amplifier has SMA-Female connectors and is housed in a module which measures 2.6" x 2.0" x 0.5". Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier System from AR Modular RF The AR-50 from AR Modular is a portable, automatic band switching, low noise amplifier which operates from 30 to 512 MHz. It provides up to 50 W of power with a gain of 12 dB and a noise figure of 2 dB. It is ideal for for multi-band VHF/UHF tactical radio equipment employing legacy, proprietary and emerging waveforms. Download Datasheet | Product Details
|
| | |
|
|  | RF Amplifier from Ophir RF The 5303133-001 from Ophir RF is a solid state, power amplifier module which operates from 20 to 1000 MHz. It provides up to 100 W of saturated power, a gain of 50 dB with a flatness of 2.5 dB and requires 24 to 32 V of DC supply. It has spurious of -60 dBc and harmonics of -20 dBc. It is ideal for wireless / communication, test & measurement, military and radar applications. Download Datasheet | Product Details
|
| | |
|
|
|  | RF Amplifier System from Giga-tronics The Giga-tronics GT-1000B is a high power, linear microwave power amplifier for multi-octave bands that operates from 100 MHz to 20 GHz with 40 dB Gain. The amplifier has an output power of 5 to 10 W. This power amplifier is ideal for EMC, Wireless Communications and Defense EW applications. The GT-1000B incorporates the CAP Wireless patented Spatium spatial combining architecture solid-state amplifier. Download Datasheet | Product Details
|
| | |
|
|  | Test & Measurement Amplifier from Rohde & Schwarz The R&S BBA150 is a new family of broadband amplifiers that operate from 0.8 to 3 GHz, 0.8 to 6 GHz and 2.5 to 6 GHz. They provide an output power from 15 to 200 W based on the selected configuration and have a gain of over 45 dB. The amplifiers are available in both Single Band and Double Band configurations. Download Datasheet | Product Details
|
| | |
|
|  | Pre-Amplifier from Aaronia AG The UBBV-NF 25 is a Broadband Preamplifier that operates from 1 to 50 MHz. It is ideally used as a preamplifier for spectrum analyzers (can be used with any brand of spectrum analyzers including those from Aaronia). It has a gain of 25 dB and an output power of 15 dBm. The amplifier requires a 10 V DC supply and can provide an output power of up to 15 dBm. It has a 100 kohm SMA Female input and a 50 Ohm SMA Male output with a USB 2 Interface. Download Datasheet | Product Details
|
| | |
|
