| New Aerospace & Defense Products . |
|
|
| Miniature Programmable Transceiver from 400 MHz to 16 GHz | |
Software Defined Radio
from Cubic Nuvotronics, Inc.
|
| The Multiband Miniature Transceiver (MMT) from Cubic operates in the UHF, L, S, C, and Ku bands from 400 MHz to 16 GHz. It provides the basis for the two-way transport of video and IP data between airborne platforms and land or maritime users. This radio supports programmable waveforms and has been tested for interoperability with U.S. standard CDL and bandwidth-efficient CDL waveforms. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4-Channel Monitoring Receiver from 20 to 520 MHz for EW/SIGINT Applications | |
RF Monitoring Receiver
from Novator Solutions
|
| The HUGIN 304DF from Novator Solutions is an RF Monitoring Receiver that operates from 20 to 520 MHz (optional range of 0.5 to 6 GHz). It has a two-stage superheterodyne Rx architecture with 4 receiver channels with an instantaneous bandwidth of 80 MHz each. This receiver also has 60 audio channels and 4 IQ channels (a total of 64 DDRs) enabling simultaneous monitoring, listening, and recording of analog clear voice Push to Talk (PTT) communication using FM, AM, or SSB modulation. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Performance Remote Wideband Recorder & Receiver from 9 kHz to 18 GHz | |
RF Spectrum Recording and Playback System
from CRFS
|
| The RFeye SenS Remote 100-18 from CRFS is a Remote Spectrum Receiver with I/Q Recording that operates from 9 kHz to 18 GHz. It combines the RF and edge-processing capabilities of the RFeye Node 100-18 together with the high-speed recording feature of the RFeye SenS family. This recorder can perform all the functions of a standard RFeye Node but with the addition of full-rate wideband I/Q streaming (100 MHz IBW). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
| Download everything RF's Digital Magazine | | |
|
|
|
|
|
|
|
| Surface-Mount Switched Filter Bank MMICs from 6 to 18 GHz | |
Switched Filter Bank
from Linwave Technology
|
| The LW48-797 Series from Linwave Technology are Hybrid Switched Filter Bank MMICs that operate from 6 to 18 GHz. They have integrated LNA, limiter, and GaAs switches with ports fully matched to 50 ohms. These MMICs have a switching speed of less than 100 ns and provide 14 dB of gain (in switched paths) and 50 dB of rejection. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| IP67/IP68-Rated Waterproof RF and Microwave Connectors | |
RF Connector
from IntelliConnect
|
| The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA. |
| |
Download Datasheet
Product Details | |
|
|
|
| Military-Grade SAW Bandpass Filter with Passband from 902 to 928 MHz | |
Band Pass Filter
from Southwest Antennas
|
| The 1080-210 from Southwest Antennas is a Standalone SAW Bandpass Filter with a passband from 902 to 928 MHz. It has a passband insertion loss of less than 3.5 dB and provides an out-of-band rejection of -40 dBc (at 880 MHz). This filter has been designed to be installed in-line into a system when additional RF filtering is required to improve the system performance and is suitable for operation in congested, high-interference RF environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, Multiband Vehicular-Mounted Antenna from 225 to 2000 MHz | |
Antenna
from ARA
|
| The ARA-252 from ARA is a Multiband Vehicular-Mounted Antenna that operates from 225 to 2000 MHz. It provides a gain of 2 dBi and has a VSWR of 2.0:1. This 50-ohm single-port antenna can handle an input power of up to 125 W and does not require any tuning or ground plane for operation. It is an environmentally qualified, Commercial Off the Shelf (COTS), TRL-8 (Technology Readiness Level) antenna and bolts to a standard universal antenna mount, or a NATO standard 4.5-inch bolt circle found on most military vehicles. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| High-Speed TTL Threshold Detector from 2 to 18 GHz | |
RF Detector
from Quantic PMI (Planar Monolithics)
|
| The TD-30T-218-FC-HS-ROHS from Quantic PMI (Planar Monolithics) is a High-Speed Threshold Detector that operates from 2 to 18 GHz. It has a dynamic range from -20 dBm to +5 dBm, a response time of less than 100 ns and provides a TTL output. This detector uses an integrated solder pin to adjust the threshold level at the output. It requires a DC supply of 12 V and consumes less than 100 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W Ka-Band GaN Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Qorvo
|
| The QPB2040N from Qorvo is a Solid-State Amplifier that operates in the Ka-Band from 18 to 40 GHz. It delivers a saturated output power of 50 dBm (100 W) with a power gain of 11 dB and has a power-added efficiency of 9.8%. This GaN amplifier is based on Qorvo’s patented and field-proven Spatium combining technology that provides unprecedented Solid-State Power Amplifier (SSPA) performance in a rugged, compact, and lightweight package. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Block Downconverter from 27 - 29.5 GHz for Professional/Military Applications | |
Low Noise Block
from ACORDE
|
| The ACCVR-KaL-E29-V4 from ACORDE is a Block Downconverter (BDC) that converts input frequencies from 27 - 29.5 GHz to output frequencies from 950 - 2450 MHz. It provides a gain of 30 dB with a noise figure of less than 15 dB and has a phase noise of -125 dBc/Hz (@1 MHz offset). This downconverter provides an image rejection of more than 45 dB, has an output P1dB of 10 dBm, and in-band spurious emission of better than -50 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
