| Featured Products this Week . |
|
|
| Real-Time Spectrum Analyzer with GNSS Capabilities | |
RF Spectrum Analyzer
from ThinkRF
|
| The R5750 from thinkRF is a Real-Time Spectrum Analyzer with built-in GPS for mobile wireless situational awareness applications. With built-in GPS capabilities, this Real-Time Spectrum Analyzer enables engineers in the field to conduct in-depth analysis of complex waveforms while knowing the location and time of each measurement. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Bias Chokes for High Current Bias Tee Applications | |
RF Inductor
from Coilcraft
|
| The 4310LC Series from Coilcraft are Bias Chokes that provide flat bandwidth with high impedance to 6 GHz. They have a Ferrite core and offer low DCR with excellent current handling. These bias chokes are available in surface-mount packages that measure 11.68 x 4.8 mm and are ideal for use in high-current bias tee applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 W Class-A Solid-State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 125S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers an output power of 150 W with a small signal gain of more than 55 dB. This class-A SSPA is a self-contained, broadband solution that has been designed for applications where a combination of instantaneous bandwidth, high gain, and linearity are required. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 W Solid State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2145B from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/Pulsed saturated output power of 30 W with a power gain of more than 44 dB. This amplifier has a 2-tone intermodulation (IMD) of -30 dBc, harmonics of -20 dB, and spurious emission of -60 dBc. It has a class A/AB linear design and built-in protection circuits with a forward RF Sample port. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 W TWT Amplifier from 5.850 to 6.425 GHz for Uplink Applications | |
SATCOM Amplifier System
from Comtech Xicom Technology
|
| The XTRT-750C from Comtech Xicom Technology is a C-Band TWT Power Amplifier that operates from 5.850 to 6.425 GHz. It delivers a Traveling Wave Tube (TWT) output power of 750 W with a large signal gain of more than 70 dB and a small signal gain of 75 dB. This amplifier incorporates high-efficiency, dual-stage collector TWTs and has integrated RF gain control, a solid-state pre-amplifier, RF filters, cooling, and monitoring and control (M&C) systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Way Power Divider with Inbuilt DC Block from 0.8 to 2.2 GHz | |
Power Divider
from MECA
|
| The DC804-2-1.500V from MECA is a 4-Way Power Divider/Combiner that operates from 0.8 to 2.2 GHz. It can handle an input power of up to 20 W, has an insertion loss of less than 0.8 dB, and provides an isolation of 27 dB. This power splitter has an inbuilt DC block with a DC voltage handling capacity of 50 V. It has an amplitude balance of ±0.2 dB and a phase balance of ±4°. |
| |
Download Datasheet
Product Details | |
|
|
| Upcoming Webinar: Sign up now! | | |
|
|
| 36-Channel Programmable Attenuator Assembly from 200 MHz to 6 GHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50PA-857 from JFW Industries is a Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It consists of 36 individually controlled solid-state programmable attenuators that provide an attenuation range from 0 to 63 dB in 1 dB steps with a switching speed of 3 µs. This attenuator assembly can handle an average input power of +27 dBm and has an insertion loss of less than 6.6 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Output Comb Generator from 10 MHz to 7 GHz for EMC Applications | |
Comb Generator
from AMCAD Engineering
|
| The HPR727A from AMCAD Engineering is a Comb Generator for input frequencies from 10 MHz to 7 GHz. It provides a dual differential output and can be used in single mode with the unused output terminated with a 50-ohm load. This generator is calibrated with 10 MHz input signal using a NIST traceable comb generator and can generate output harmonic signals up to 40 GHz with an input signal of 7 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2.4/5 GHz 2x2 Wi-Fi 5 + Bluetooth 5.3 Wireless SoC | |
Wireless SoC
from NXP Semiconductors
|
| The 88W8997 from NXP Semiconductors is a Dual-Band 2.4/5 GHz 2x2 Wi-Fi 5 and Bluetooth 5.3 Wireless SoC for multi-user (MU) MIMO links. This SoC uses various design enhancements and is fabricated using a low-power 28 nm process technology to reduce power consumption by up to 40% compared to existing solutions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 GHz, 256-QAM Front-End Module for 802.11ac Applications | |
Front End Module
from Microchip Technology
|
| The LX5589H from Microchip Technology is a 5 GHz 802.11ac Front-End Module (FEM). It has been designed to reduce the system footprint, bill of materials, and manufacturing cost. This module integrates a highly linear power amplifier (PA), log power detector, low noise amplifier (LNA) with bypass capability, and an SPDT Tx/Rx antenna switch. It supports 256-QAM modulation and operates over a channel bandwidth of 80 MHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Power Bluetooth 5.4, LE Audio, Thread, and Matter SoC | |
Wireless SoC
from Nordic Semiconductor
|
| The nRF54H20 from Nordic Semiconductor is a Multiprotocol SoC that supports Bluetooth Low Energy, LE Audio, Bluetooth mesh, Thread, and Matter protocols. This SoC supports all Bluetooth 5.4 features and is designed to support upcoming Bluetooth specifications. It has multiple Arm Cortex-M33 processors clocked up to 320 MHz, and multiple RISC-V coprocessors with each processor that brings optimized for a specific type of workload. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W Space-Qualified Isolator from 7 to 9 GHz | |
RF & Microwave Isolator
from Smiths Interconnect
|
| The I7090/B from Smiths Interconnect is a Space-Qualified Isolator that operates from 7 to 9 GHz. It can handle a forward/reverse CW input power of 20 W, provides more than 19 dB of isolation, and has an insertion loss of less than 0.5 dB. The isolator is designed to be used in space-critical missions including launch and payload deployment and feature CVD terminations produced by Smiths Interconnect. |
| |
Download Datasheet
Product Details | |
|
|
|
| Switchable Fixed Frequency Synthesizer from 11 to 12 GHz | |
Frequency Synthesizer
from EM Research
|
| The EXP-12000-02 from EM Research is a Switchable Fixed Frequency Synthesizer for frequencies from 11000 MHz to 12000 MHz. It delivers an output power of more than +13 dBm, has a phase noise of less than -100 dBc/Hz (at 10 kHz offset), and has a switching speed of 10 ms. This synthesizer is capable of alternating between various frequencies between 11 and 12 GHz, offering a fixed and switchable solution in a single package. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Rackmount RF Shield Test Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-8724 from RF Electronics is an RF Shield Test Box that is designed for the frequency range from 20 MHz to 12 GHz. It has a thick RF-absorbing foam that deadens standing waves and reflections. This test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| L-Band 8x8 Butler Matrix for Beamforming Applications | |
Butler Matrix
from TRM Microwave
|
| The BM88701 from TRM Microwave is an 8x8 Butler Matrix that operates in the L Band. It has integrated phasing networks and is capable of handling a broad range of antenna patterns. The multi-layer architecture of this butler matrix coupled with both microstrip, and coaxial technologies provides extremely low loss and high-power handling capability. |
| |
Download Datasheet
Product Details | |
|
|
|
| SWD RF Switch Connector from DC to 6 GHz for Direct PCB Attachment | |
RF Connector
from Linx Technologies
|
| The CONSWD001-SMD from Linx Technologies is an SWD RF Switch Connector that operates from DC to 6 GHz. It can handle an input power of 2 W and can withstand a dielectric voltage of 300 V (RMS). This connector provides more than 56 dB of isolation and has an insertion loss of less than 1.5 dB. It has a steel center contact and supports direct PCB attachment and reflow- or hand-solder assembly. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount Reflective SPDT Switch from 9 kHz to 67 GHz | |
RF Switch
from MACOM
|
| The MASW-011151 from MACOM is a Reflective SPDT Switch that operates from 9 kHz to 67 GHz. It can handle an input power of up to 27.5 dBm, has an insertion loss of less than 1.5 dB, and more than 50 dB of isolation. This switch is manufactured on a Silicon-on-Insulator (SOI) process and has input and output return losses of 16 dB in the thru path. |
| |
Download Datasheet
Product Details | |
|
|
|
| 32 dB Directional Coupler from 800 to 4200 MHz | |
Directional Coupler
from Innovative Power Products
|
| The IPP-8078 from Innovative Power Products is a Directional Coupler that operates from 800 to 4200 MHz. It has a coupling value of 32 dB with directivity of 18 dB. The coupler can handle an input power of up to 150 W and has an insertion loss of less than 0.30 dB. It is available in a surface-mount package that measures 25.40 x 12.70 x 4.039 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
