| New RF and Microwave Products this Week . |
|
|
| E-Band Waveguide Power Amplifier from 71 to 86 GHz | |
RF Amplifier
from Mini Circuits
|
| The WVA-71863HP+ from Mini-Circuits is a Power Amplifier that operates from 71 to 86 GHz. It delivers a saturated output power of 24.5 dBm (0.28 W) with a gain of 39 dB and a gain flatness of ±1.5 dB. This amplifier incorporates several DC-protection features such as over-voltage, reverse voltage, and in-rush current protection to protect from damage in case of unexpected spikes in voltage during operation. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Bit, 360° SOI Phase Shifter from 8 to 11.5 GHz | |
Digital Phase Shifter
from Qorvo
|
| The QPC2110 from Qorvo is an SOI 6-bit Phase Shifter that operates from 8 to 11.5 GHz. It provides phase coverage of 360° with an LSB (least significant bit) of 5.625°. This bi-directional phase shifter has an insertion loss of 5.5 dB with an RMS amplitude error of less than 0.4 dB and an RMS phase error of less than 3 dB. This phase shifter has a switching speed of up to 91 ns and requires a control voltage of 0/+3.3V. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-coaxial Cable Assemblies from DC to 75 GHz | |
RF Cable Assembly
from Huber+Suhner
|
| The MXPM70 from Huber+Suhner are Multicoaxial Cable Assemblies that operate from DC to 75 GHz. These cable assemblies offer a hassle-free experience with its user-friendly magnet mount connection, delivering performance, reliability, and value. They have a return loss of over 20 dB (DC-50 GHz) and a phase match of +/- 1 ps. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB Directional Coupler from 850 to 2150 MHz | |
Directional Coupler
from ETL Systems
|
| The ODU-4306 from ETL Systems is a Directional Coupler that operates from 850 to 2150 MHz. This 20 dB coupler has a directivity of 14 dB (coupled port) and has an insertion loss of 1.1 dB (through path). It can handle an input power of 5 W and has a current rating of up to 500 mA. The coupler is available in an IP67-rated module that measures 76.10 x 63.00 x 23.50 mm and has SMA or N-type connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Noise Amplifier from 6 to 20 GHz | |
RF Amplifier
from Marki Microwave
|
| The ADM-8556 from Marki Microwave is a Low Noise Amplifier that operates from 6 to 20 GHz. It provides a small signal gain of 24 dB with a noise figure of 1.3 dB and has a P1dB power of 16 dBm. This amplifier is ideal for applications requiring low power consumption and small form factors. It requires a DC supply of +3 V and consumes less than 86 mA of current. The LNA is available as a bare die or connectorized module. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Noise Rackmount Frequency Synthesizers from 5 MHz to 18 GHz | |
Frequency Synthesizer
from Quantic Wenzel (Wenzel Associates, Inc.)
|
| The Low-Noise Rackmount Frequency Synthesizers from Quantic Wenzel can be customized to have a frequency range from 5 MHz to 18 GHz. They have options for low, ultra-low, and golden phase noise performance and phase locking with an external reference. The synthesizers include low-noise voltage regulators and can be mounted with crystal oscillator(s) and/or RF modules within the chassis. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| Low Noise Amplifier from 10.7 to 12.8 GHz | |
RF Amplifier
from AmpliTech
|
| The APTW5-10701280-45K10-WR75-D6 from Amplitech is a Low Noise Amplifier that operates from 10.7 to 12.8 GHz. It provides a high gain of 42 dB (flatness of ± 0.5 dB) with a noise figure of less than 0.63 dB and has a noise temperature of 45 K. This LNA is fabricated using state-of-the-art GaAs pHEMT technology. It requires a supply voltage of 15 V and consumes up to 190 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Wi-Fi 7 + Bluetooth 5.4 Combo SoC for Mobile Handsets | |
Wireless SoC
from Broadcom
|
| The BCM4390 from Broadcom is a 2.4/5/6 GHz Wi-Fi 7 + Bluetooth 5.4 Combo SoC that has been optimized for mobile handset applications where high performance, low latency, low power consumption, and small solution size are the key requirements. This SoC includes a dual-band 2x2 IEEE 802.11be-compliant radio, a dual-core Bluetooth 5.4 radio, a dedicated scan core, and serial interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE-M/NB-IoT/EGPRS Module with 2G Fallback for Global Deployments | |
Cellular Module
from u-blox AG
|
| The LEXI-R422 from u-blox is an LTE-M/NB-IoT/EGPRS Module with a 2G fallback for global deployments. It supports 3GPP Release 13 LTE Cat M1/NB1 and 3GPP Release 14 LTE Cat M1/Cat NB2. This module offers LTE-M and NB-IoT coverage with 16 bands and software-based filtering configuration. It has a dynamic antenna tuning interface that optimizes the end-device antenna efficiency and overall RF performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 9 kHz to 18 GHz RF Receiver with 100 MHz Real-Time Bandwidth | |
RF Monitoring Receiver
from CRFS
|
| The RFeye Node 100-18 is an Intelligent Wideband Receiver that operates from 9 kHz to 18 GHz and has a tuning resolution of 1 Hz. It has an instantaneous bandwidth (IBW) of 100 MHz and quickly sweeps through the frequency range with less time to retune for faster sweep speeds and a higher probability of intercept. This spectrum monitoring and geolocation system is designed for remote deployment in distributed networks both indoors and outdoors, including hostile environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 100 W, Rugged CW/Pulsed GaN Solid-State Amplifier from 2 to 6 GHz | |
RF Amplifier
from RFTR Electronics
|
| The JA20006000P50 from RFTR Electronics is a Solid-State Amplifier Module that operates from 2 to 6 GHz. It delivers an output power of 100 W with a gain of 60 dB. This Class AB amplifier utilizes GaN-on-SiC transistors and is suitable for CW and pulsed waveforms. With a fast switching time of less than 4 µs (ON/OFF), this amplifier ensures power saving during pulsed applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| SP65T Absorptive PIN Diode Switch from 0.1 to 4 GHz | |
RF Switch
from American Microwave Corporation
|
| The MSN-65DT-051-DEC-MP from American Microwave Corporation is an SP65T Absorptive PIN Diode Switch that operates from 100 MHz to 4 GHz. It has an ON/OFF switching time of less than 150 ns, a rise/fall time of 50 ns, and provides isolation of more than 45 dB. This switch can handle a CW input power of up to +20 dBm and has an insertion loss of less than 15 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| E-Band Waveguide Power Amplifier from 81 to 86 GHz | |
RF Amplifier
from Filtronic
|
| The Taurus 16 from Filtronic is a High-Power Amplifier (PA) that operates in the E-Band from 81 to 86 GHz. It delivers a saturated output power of 6.3 W (~38 dBm) with a small signal gain of 21 dB and has a bandwidth of 5 GHz. This amplifier includes two Cerus 8 E-Band amplifier modules, and each module contains eight Filtronic’s GaAs pHEMT PA MMICs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Space-Qualified L1/L2 Band GPS Receiver for LEO and GEO Applications | |
GNSS Module
from General Dynamics Mission Systems
|
| The Sentinel® M-Code GPS Receiver from General Dynamics provides PPS position, velocity, and time information for LEO and GEO satellites (with an option for MEO and HEO). It has 32 channels (can go up to 64 channels) with support for C/A, P(Y), and Modernized M-Code (L2C optional) civil signals. This receiver operates in the L1 and L2 bands, has a dual antenna configuration, and allows any channel to be assigned to either antenna. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Up/Down Frequency Converter Module from 6 to 20 GHz | |
RF Up-down Converter
from TMYTEK
|
| The UDM0620 from TMYTEK is an Up/Down Converter with an RF frequency from 6 to 20 GHz and an IF frequency from 1 to 10 GHz. It has a built-in LO frequency from 6 to 20 GHz with an LO resolution of 1 MHz and has an LO leakage of better than -25 dBm. This converter has a conversion loss of 10 dB and a noise figure of 13 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cost-Effective Signal Analyzer from 100 kHz to 26.5 GHz | |
RF Spectrum Analyzer
from Saluki Technology
|
| The CSA2026 from Saluki Technology is a Signal Analyzer for the frequency range from 100 kHz to 26.5 GHz. It can test signal power, frequency, phase, P-1, TOI, OBW, channel power, spurious, ACPR, CCDF, SEM, EVM, and other indicators. This analyzer has normal, peak, sample, negative peak, log power average, RMS average, and voltage average trace detectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 Gbps Point-to-Point FDD Microwave Link 71 to 86 GHz | |
Microwave Backhaul Radio Links
from RACOM
|
| The RAy3-80 from RACOM is a Point-to-Point (PtP) Microwave Link that operates in the E-band from 71 to 86 GHz. It supports channel bandwidths of up to 2000 MHz and delivers a data rate of up to 10 Gbps (in each direction). This microwave link supports FDD duplex traffic with flexible duplex spacing and 2PSK, 4PSK, 8PSK, 16QAM, 32QAM, 64QAM, and 128QAM modulation schemes. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-Millimeter-Wave Low-Noise Gain Block from 220 to 325 GHz | |
RF Amplifier
from Northrop Grumman
|
| The MGA2101 from Northrop Grumman is a Low-Noise Gain Block that operates from 220 to 325 GHz. It provides a linear gain of 13 dB with a noise figure of 5 dB and delivers an output power of 1 mW. This unconditionally stable gain block requires a bias voltage of 1.75 V and consumes 24 mA of current. It is available in a module that measures 1.00 x 0.75 x 1.00 inches and has standard WR3.4 waveguide interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| MIL-STD-348B Standard 2.92 mm RF Connectors from DC to 40 GHz | |
RF Connector
from Hirose Electronic
|
| The 2.92 mm Series RF Connectors from Hirose Electronic operate from DC to 40 GHz. They conform to MIL-STD- 348B standards and provide excellent high-frequency performance with consistent mounting quality. The board receptacles of these connectors are screw-mounted instead of being soldered to the board and can be reused which reduces the mounting complexity. |
| |
Download Datasheet
Product Details | |
|
|
|
| Integrated UHF RFID Reader for Automatic Vehicle Identification | |
RFID Reader
from ID Tech Solutions Pvt. Ltd.
|
| The IDT 87 from ID Tech Solutions is an Integrated UHF RFID Reader that has been designed for automatic vehicle identification applications. It integrates an RFID reader and a circularly polarized antenna within the same enclosure. This reader delivers a programmable output power from 0 to 30 dBm and can detect tags at a distance of up to 18 m (also depending on the tag and environment). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Omnidirectional Antennas for Wi-Fi 7/Bluetooth Applications | |
Antenna
from PCTEL
|
| The MHOTB Series from PCTEL is a 2.4/5/6 GHz Base Station Antenna for Wi-Fi 7, Bluetooth, and BLE applications. These linearly polarized antennas provide peak gain of 7 dBi and have a VSWR of less than 2.5:1. They have an omnidirectional radiation pattern and are suitable for broadband access applications. The antennas are available in IP67-rated, UV-resistant fiberglass housing that measures 3.18 (Dia.) x 26.72 (H) cm and have N-type (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wi-Fi 6E/7 Point-to-Point Antennas from 4950 to 7125 MHz | |
Antenna
from Radio Waves
|
| The CXPDX-6RSP Series from RadioWaves are Wi-Fi 6E/7 Point-to-Point Antennas that operate from 4950 to 7125 MHz. They deliver a gain of up to 34 dBi and have a half-power beamwidth of up to 9 degrees (horizontal/vertical). These dual-polarized antennas have a front-to-back ratio (F/B) of up to 40 dB, return loss of -7.4 dB and a VSWR of 2.5:1. They have 2x2 MIMO functionality with 2-port options. |
| |
Download Datasheet
Product Details | |
|
