PREV 10 Aug, 2023 NEXT

Latest Wireless Infrastructure News & Products

10 Aug, 2023 Newsletter - everything RF

Top Wireless Infra news and products. View it in your browser

 
Wireless Infra Update
Date: 10 Aug, 2023
 
Sponsored by Rohde & Schwarz
 
 
Latest Wireless Infrastructure News
News
L-com Introduces Advanced Line of Remote-Electrical-Tilt Antennas for Optimal Wireless Signal Coverage

L-COM

News
University of Utah Using Pixus' Weatherproof Software Defined Radios to Evaluate its Wireless Infra Deployments

Pixus Technologies

News
Cambium Networks Enables Wibernet to Provide 200 Mbps 5G Fixed Wireless Connections in Cape Town

Cambium Networks

News
Microlab Introduces New Series of Passive Modular Carrier Combiners for Neutral Host DAS/D-RAN Architectures

Microlab

News
Peraso and Jaguar Wave Introduce Breakthrough 60 GHz Wireless Access Solutions

Peraso Technologies, Inc

News
Fairview Microwave Introduces Wi-Fi 6E Antennas for Long-range, Point-to-Point Connections

Fairview Microwave

News
Ericsson and MediaTek Achieve New Uplink Speed Record for Fixed Wireless Access Technology

Ericsson

News
MIT Professor Muriel Médard and JMA Launch Groundbreaking 5G Research Partnership

JMA Wireless

News
T-Mobile Rolls Out Four-Carrier Aggregation on 5G SA Networks with Data Rates up to 3.3 Gbps

T-Mobile

News
Galtronics Expands into the European Market with its Patented Multibeam Antennas

Galtronics USA, Inc

News
RadioWaves Launches 6 GHz Point-to-Point Antennas for Enhanced Wi-Fi 6E and Wi-Fi 7

RadioWaves

News
Optical Zonu Joins Forces with Former EMCORE Resellers to Bridge Market Gap

Optical Zonu

Sponsored by Rohde & Schwarz
R&S®PVT360A Performance Vector Tester
R&S®PVT360A Performance Vector Tester – Minimal footprint, ultimate performance
The R&S®PVT360A is a VSG/VSA single-box vector tester optimized for FR1 base station, small cell and RF component in production and characterization environments. It has everything needed to activate a frequency range up to 8 GHz, a bandwidth extension of 500 MHz and the second TRX. Click here to learn more.
Interesting White Papers & Articles
Analysis and Simulation of Broadband and Cross-band PIM in Base Station Antennas - CommScope
Surge Protection Considerations and Solutions for Citizens Band Radio Service Networks - PolyPhaser
Taking Wireless Infrastructure Systems Design from 3G to 5G and Beyond - MathWorks
Wi-Fi 6E and Future-Proofing Wireless Infrastructure - Arista Networks, Inc
Channel Sounding in Sub-Terahertz Bands for Application in 6G Communications - Anritsu
More Whitepapers
Upcoming Event
Event Image
EuMW 2023
Date: 17 to 22 September, 2023
Location: Messe Berlin Hub27, Berlin, Germany
More Events
New Wireless Infra Products .
Multiplexer
50/75-Ohm L-Band Multiplexer from 850 to 2150 MHz
Multiplexer  from ETL Systems

The SCP-4101 from ETL Systems is an L-Band Multiplexer that operates from 850 to 2150 MHz. This multiplexer has three ports – common port, L-Band port and 10 MHz port – and multiplexes the L-band and 10 MHz ports. It can handle an input power of up to 5 W, has an insertion loss of less than 0.9 dB and provides more than 30 dB of isolation at the 10 MHz port.
Download Datasheet Product Details
RF Over Fiber Module
RF Over Fiber 5G - DAS Extension System from 0.5 to 6000 MHz
RF Over Fiber Module  from RFOptic

The RFoF-6GHz from RFOptic is an RF Over Fiber 5G - DAS extension system that operates from 0.5 to 6000 MHz. It has been developed to overcome the loss caused by coaxial infrastructure in terms of EVM and ACLR over a wide range of signal levels over long distances. The 5G system consists of an outdoor enclosure which is situated on the roof close to the antenna and an indoor unit connected by optical fibers.
Download Datasheet Product Details
Band Pass Filter
2-Channel Interference Mitigation Bandpass Filter from 3700 to 3980 MHz
Band Pass Filter  from Kaelus

The KA-6008-8433 from Kaelus is an Interference Mitigation Bandpass Filter with tuneable passbands from 3700 – 3760 MHz (Position 1) and 3700 – 3980 MHz (Position 2). In Position 1, it mitigates interference in the satellite communication band (3820-3980 MHz) while allowing it to pass through the 3700-3760 MHz spectrum (A1, A2, and A3 blocks).
Download Datasheet Product Details
RAN Radio Unit
5G Open-Radio Unit for O-RAN Deployments
RAN Radio Unit  from AmpliTech

The A1001-RU-1 from AmpliTech is a 5G Open-Radio Unit (O-RU) for n78 band from 3.55 to 3.7 GHz. It utilizes GaN power amplifiers along with 64 phased array elements for digital beamforming. This O-RU consists of three main parts: the first is the Radio Frequency Processing Unit (RFPU) which includes the antennas, high power amplifiers, low noise amplifiers, duplexers, and other functions.
Download Datasheet Product Details
Microwave Backhaul Radio Links
10 Gbps Point-to-Point FDD Microwave Link 71 to 86 GHz
Microwave Backhaul Radio Links  from RACOM

The RAy3-80 from RACOM is a Point-to-Point (PtP) Microwave Link that operates in the E-band from 71 to 86 GHz. It supports channel bandwidths of up to 2000 MHz and delivers a data rate of up to 10 Gbps (in each direction). This microwave link supports FDD duplex traffic with flexible duplex spacing and 2PSK, 4PSK, 8PSK, 16QAM, 32QAM, 64QAM, and 128QAM modulation schemes.
Download Datasheet Product Details
Microwave Backhaul Radio Links
LTE Bands 42/43/48 6T6R MIMO CBRS Radios
Microwave Backhaul Radio Links  from BLiNQ Networks

The FW-600 Band 42/43/48 Series from BlinQ are CBRS Radios that operate in the TDD LTE Bands 42, 43, and 48. They have a channel bandwidth of 10/20 MHz and support up to 6T6R MIMO configurations (several MIMO configurations possible ). These radios comply with 3GPP Release 10 (software upgrade to Release 13) and support up to 288 user equipment per base unit.
Download Datasheet Product Details
Sponsored by Rohde & Schwarz
R&S®CMX500 radio communication tester
5G Testing In One Box With The R&S®CMX500
The future of 5G testing is here: The R&S®CMX500 radio communication tester is the future-proof solution for 5G NR testing with unmatched testing capabilities and an intuitive, flexible web-based user interface. Click here to learn more.
RF Repeaters
2x2 MIMO Smart Repeater from 3.3 to 4 GHz for 5G-NR Applications
RF Repeaters  from Airgain

The Lighthouse™ Smart Repeater from Airgain operates from 3300 to 4000 MHz covering 5G NR Band n77. This high-power outdoor smart repeater is compliant with 3GPP TS 38.106 and can extend cell coverage by improving uplink and downlink signal power and offers a flexible design with unique smart features.
Download Datasheet Product Details
RF Repeaters
Digital Repeater from 136 – 174/380 – 512 MHz for Public Safety Applications
RF Repeaters  from Advanced RF Technologies

The PSR-VU-9537-U from ADRF is a Digital Repeater that operates in the VHF/UHF bands from 136 – 174 MHz and 380 – 512 MHz. It utilizes digital filtering technology (DSP) to eliminate adjacent channel interference to allow band selectivity and simultaneously supports 1 wide band and up to 8 non-contiguous narrow bands in each of the VHF and UHF bands.
Download Datasheet Product Details
RF Tapper
300 W, 20 dB Wideband RF Tappers from 340 to 5850 MHz
RF Tapper  from Comba Telecom

The CO-FSxx-OMD300C(I) Series from Comba are Wideband RF Tappers that operate from 340 to 5850 MHz covering Public Safety Band (UHF, 700/800), CBRS and LTE-U/LTE-LAA frequencies. They have a coupling coefficient from 5 to 20 dB with a coupled loss of less than 1.8 dB and a VSWR of less than 1.4:1.
Download Datasheet Product Details
Fixed Attenuator
100 W, 10 dB Fixed Attenuator from 0.698 to 2.7 GHz
Fixed Attenuator  from MECA

The LPA100-10-11WWP from MECA is a Fixed Attenuator that operates from 0.698 to 2.7 GHz. It provides an attenuation of 10 dB with an accuracy of ±1 dB and has a PIM of -161 dBc (2x20 W tones). This low PIM attenuator can handle an average input power of up to 100 W and a peak input power of 1.5 kW. It is available as a connectorized module that measures 11.10 x 4.75 x 3.13 inches with 7/16 DIN (male/female) connectors.
Download Datasheet Product Details
RF Surge Protector
HEMP and LEMP Protection Coaxial Surge Protector from 30 to 500 MHz
RF Surge Protector  from NexTek, LLC.

The FPHNFNFJBF0-B from NexTek is a Surge Protector that operates from 30 to 500 MHz. It has been designed to dramatically reduce the electrical energy from high-speed HEMP, electrostatic discharge (ESD), and lightning activity. This surge protector can handle a LEMP surge of up to 30 kA, a LEMP multi-strike (10x) of 20 kA, and a HEMP surge (250x) of 5 kA.
Download Datasheet Product Details
Base Station Antenna
8-Port Base Station Antenna from 617 – 894/1710 – 2690 MHz
Base Station Antenna  from Alpha Wireless

The AW3864-E-F from Alpha Wireless is an 8-Port Base Station Antenna that operates from 617 to 894 MHz (4-ports) and 1710 to 2690 MHz (4-ports). This linearly polarized antenna provides up to 18.3 dBi of gain and has a VSWR of less than 1.5:1. It has an azimuth beamwidth of up to 68° and an elevation beamwidth of 8°.
Download Datasheet Product Details
Base Station Antenna
12-Port MIMO Panel Antenna from 3300 to 4000 MHz
Base Station Antenna  from Galtronics USA, Inc

The GP1712-07770 from Galtronics is a 12-Port MIMO Panel Antenna that operates in the C-Band from 3300-3500 MHz, 3500-3700 MHz, and 3700-4000 MHz. This ±45° polarized antenna provides a gain of up to 21.2 dBi and has a VSWR of 1.50:1. It provides an azimuth beamwidth from 10.6° to 11.7° and an elevation beamwidth from 12.8° to 13.5°.
Download Datasheet Product Details
Base Station Antenna
8-Port, 65° Base Station Antenna from 698 to 2690 MHz
Base Station Antenna  from CellMax Technologies

The 12091v from CellMax is a Base Station Antenna that operates from 698 to 960 (Low Band) MHz and 1695 to 2690 MHz (High Band). This cross-polarized antenna provides a gain of 17 dB and has a VSWR of 1.5:1. It has an azimuth beamwidth of 65°, an elevation beamwidth from 3.2° to 11.0° and supports electrical down-tilt from 2 to 10°.
Download Datasheet Product Details
Base Station Antenna
8-Port Single-Sector MIMO Panel Antenna from 1695 to 4200 MHz
Base Station Antenna  from Galtronics USA, Inc

The GP2408-B7057 from Galtronics is an 8-Port MIMO Panel Antenna that operates in the C-Band from 1695-2690 MHz and 3300-4200 MHz. This ±45° polarized antenna provides a gain of up to 16.7 dBi and has a VSWR of 1.50:1. It has an azimuth beamwidth from 22 to 28°, an elevation beamwidth of up to 28° and a front-to-back ratio of 35 dB.
Download Datasheet Product Details
Base Station Antenna
16-Port Base Station Antenna from 698 to 3980 MHz for 4G/5G Applications
Base Station Antenna  from JMA Wireless

The NWAV™ MX16FRO645-xx from JMA is a 16-Port Antenna that operates from 698 to 3980 MHz. This ±45° polarized antenna provides a gain of up to 19 dBi and has a VSWR of less than 1.5:1. It has a horizontal beam width of up to 45°, a vertical beamwidth from 7.8 to 11.5° and an electrical down-tilt range of 2-14°.
Download Datasheet Product Details
Base Station Antenna
12-Port Base Station Antenna from 698 to 2690 MHz
Base Station Antenna  from Amphenol Antenna Solutions

The 5798400R-C from Amphenol Antenna Solutions is a 12-Port Base Station Antenna that operates from 698 – 960 MHz, 1427 – 2180 MHz, and 2490 – 2690 MHz. It provides a gain of 15.5 dBi and has a VSWR of less than 1.5:1. This cross-polarized antenna has an azimuth beamwidth of 65°, an elevation beamwidth of up to 11.5° and allows an electrical down-tilt from 2° to 12°.
Download Datasheet Product Details
Base Station Antenna
10-Port Multi-Band Stadium Sector Antenna from 694 to 3800 MHz
Base Station Antenna  from CommScope

The RVVSS-50M-F from CommScope is a 10-Port Multi-Band Sector Antenna that operates from 694-960 MHz, 1695-2690 MHz, and 3300-3800 MHz. This ±45° polarized antenna provides a gain of 12.1 dBi and has a VSWR of 1.5:1. It has a horizontal and vertical beamwidth of 57° with rectangular patterns and sharp cut-off for covering a section of the crowd in stadiums.
Download Datasheet Product Details
Microwave Backhaul Radio Links
1.5 Gbps 4x4 MIMO Point-to-Point/Point-to-Multipoint Radio from 5.15 to 5.85 GHz
Microwave Backhaul Radio Links  from Proxim

The Stratum X5 from Proxim is a Point-to-Point/Point-to-Multipoint (PtP/PtMP) Radio that operates from 5.15 to 5.85 GHz. It supports channel sizes of 20 MHz, 40 MHz, and 80 MHz (80 +80 MHz, and 160 MHz via future upgrades), 2x2, and 4x4 MIMO and delivers a data rate of more than 1.5 Gbps. This radio utilizes a BPSK/1024-QAM and OFDM modulation scheme with maximum throughput and uses antenna diversity to improve radio stability in harsh environments.
Download Datasheet Product Details
Base Station Antenna
6-Port Base Station Antenna from 698 – 894/1695 – 2180 MHz
Base Station Antenna  from JMA Wireless

The MX06FHG665-HG from JMA is a 6-Port Base Station Antenna that operates from 698 to 894 MHz and 1695 to 2180 MHz. This ±45° cross-polarized antenna provides an average gain of up to 19.3 dBi and has a VSWR of less than 1.5:1. It has a horizontal beamwidth of 65°, a vertical beamwidth from 5.2° to 14° and an electrical downtilt range from 0 to 12°.
Download Datasheet Product Details
About everything RF
everything RF keeps users up to date with the RF & Microwave Industry. This newsletter covers the wireless infrastructure sector. We have added the latest news, information on new products and some interesting white papers.
To unsubscribe please click here[Sender_Name]
[Sender_Address], [Sender_City], [Sender_State], [Sender_Zip]