| Featured Products this Week . |
|
|
| 6 GHz Flame-Retardant Flexible Low-Loss RF Cable | |
RF Cable
from HUBER+SUHNER
|
| The SPUMA_400-RS-FR from HUBER+SUHNER is a Flexible RF Cable that operates up to 6 GHz. It has been developed using rotary swaging technology and provides easy handling and installation due to its flexibility. This cable is an alternative to LMR coaxial cables (from Times Microwave Systems) and uses halogen-free materials with low loss and VSWR optimization. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fixed Attenuator GaAs MMICs from DC to 110 GHz | |
Fixed Attenuator
from Marki Microwave
|
| The ATNXX-00110CH Series from Marki Microwave are Fixed Attenuator GaAs MMICs that operate from DC to 110 GHz. They are available in attenuation values from 0 to 10 dB (in 1 dB steps). These 50-ohm attenuators can handle an input power of up to 2 W and have an insertion loss of less than 10 dB. They are designed to protect test equipment and prevent signal over-loading in various RF systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1.5 kW Solid-State Power Amplifier from 10 kHz to 250 MHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2080E-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 10 kHz to 250 MHz. It delivers a saturated output power of 1500 W with a power gain of more than 62 dB. This Class A/AB linear amplifier has built-in protection circuits and provides extensive monitoring parameters for all modulations, standards, forward/reflected power (in Watts & dBm), VSWR, voltage, current, and temperature for optimum reliability & ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W Class AB Solid-State Amplifier from 6 to 18 GHz | |
RF Amplifier
from Ophir RF
|
| The MODEL 4147 from Ophir RF is a Solid-State Amplifier that operates from 6 to 18 GHz. It delivers an output power of 200 W (from 6 to 17 GHz) with a small signal gain of more than 53 dB. This amplifier utilizes Class AB linear power devices that provide low harmonics, high gain, and excellent stability. It has spurious emissions of -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by MPG Solutions | | |
|
|
| Direct IQ Modulator Core Module from 400 MHz to 6 GHz | |
Modulator
from SignalCore
|
| The SC5413A from SignalCore is a Direct IQ Modulator Core Module that operates from 400 MHz to 6 GHz. It upconverts analog In-phase (I) and Quadrature (Q) IF baseband/IF input (from DC to 160 MHz) directly to RF. The DC-coupled differential IQ pair can be driven by any dual-channel baseband source such as a dual-channel arbitrary waveform generator. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Direction Finding and Spectrum Monitoring System from 9 kHz to 18 GHz | |
Direction Finding System
from CRFS
|
| The RFeye Array 300 Series from CRFS is an intermediate-sized spectrum monitoring and direction-finding system for vehicle-mounted deployment or fixed installations. The Array 300 uses a unique multi-layer approach that is more sophisticated and versatile than traditional direction finding. High-performance spiral directional antenna modules are optimized for different frequency bands and arranged in multiple orientations. |
| |
Download Datasheet
Product Details | |
|
|
|
| DPDT Reflective Antenna Tuning Switch from 0.1 to 6 GHz | |
RF Switch
from Skyworks Solutions
|
| The SKY13438-374LF from Skyworks is a Reflective DPDT Antenna Tuning Switch that operates from 0.1 to 6 GHz. It has a switching speed of less than 160 ns and provides more than 34 dB of isolation. This switch provides high linearity performance, low insertion loss, and high isolation in both frequency bands (2.4 GHz and 6 GHz), and its switching is controlled by two voltage inputs (V1 and V2). |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB Directional Coupler from 18 to 40 GHz | |
Directional Coupler
from MECA
|
| The 765-20-29.000 from MECA is a 5G ready millimeter-wave coupler that operates from 18 to 40 GHz. Available with a coupling value of 20 dB, this coupler has an insertion loss of 1.3 dB and a directivity of over 12 dB. It can handle an average power of up to 20 watts and has a VSWR of 1.80:1. The 765-20-29.000 is available in a module with 2.92mm female connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz/mmWave 5G Multi-Band Vector Transceiver | |
Base Station Simulator
from Keysight Technologies
|
| The S9130A from Keysight Technologies is a 5G Multi-Band Vector Transceiver for frequencies from 380 MHz to 8/12 GHz and 24.25 to 43.5 GHz. It leverages Keysight’s proven PXI vector transceiver platform to provide a compact test system with excellent EVM and ACLR performance for manufacturing and design verification tests. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount GPS SAW Filter for the L1-Band | |
Band Pass Filter
from Qorvo
|
| The QPQ1060 from Qorvo is a SAW Filter Module for the GPS L1 band that has a passband from 1559.92 to 1590.92 MHz. It has a bandwidth of 31 MHz, an insertion loss of less than 2 dB, and provides an out-of-band attenuation of up to 46 dB. This band pass filter is designed for the rejection of unwanted GPS signals, with excellent power handling capability for low-power transmitters, and does not require any external matching. |
| |
Download Datasheet
Product Details | |
|
|
|
| Waveguide Bandpass Filter with Passband from 47 to 57 GHz | |
Waveguide Filter
from AT Microwave
|
| The AT-BPF-4757-15A from AT Microwave is a V-Band Waveguide Bandpass Filter with a passband from 47 to 57 GHz. It has a passband insertion loss of less than 1.5 dB and provides a rejection of more than 30 dB above and below the passband. This filter is available in a gold-plated brass module that measures 37.59 x 18.80 mm with WR-15 waveguide input/output interfaces and UG-385/U type anti-clocking flange. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5G Open-Radio Unit for O-RAN Deployments | |
RAN Radio Unit
from AmpliTech
|
| The A1001-RU-1 from AmpliTech is a 5G Open-Radio Unit (O-RU) for n78 band from 3.55 to 3.7 GHz. It utilizes GaN power amplifiers along with 64 phased array elements for digital beamforming. This O-RU consists of three main parts: the first is the Radio Frequency Processing Unit (RFPU) which includes the antennas, high power amplifiers, low noise amplifiers, duplexers, and other functions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 dB Direction Coupler from 850 to 2450 MHz | |
Directional Coupler
from ETL Systems
|
| The ODU-436005 from ETL Systems is a Directional Coupler that operates from 850 to 2450 MHz. This 10 dB coupler provides a directivity of more than 14 dB and has an insertion loss of less than 1.5 dB. It can handle an input power of up to 5 W and has a return loss (thru line) of 14 dB. The coupler can withstand a DC voltage of up to 35 V (on any RF port) and has a DC pass current of 3 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 15 dBm Power Amplifier Module from 200 MHz to 67.5 GHz | |
RF Amplifier
from Millimeter Wave Systems
|
| The 200974-01 from Millimeter Wave Systems is a Power Amplifier Module that operates from 200 MHz to 67.5 GHz. It provides a saturated power output of 15 dBm (at 50 GHz) with a gain of more than 25 dB. This amplifier requires a DC supply from 8 to 12 V, consumes less than 330 mA of current, and uses an EMI suppressing feed thru and ground turret terminals to connect DC. |
| |
Download Datasheet
Product Details | |
|
|
|
| GNSS Modules for GPS, GLONASS, BDS, Galileo, and QZSS Constellations | |
GNSS Module
from Quectel
|
| The LC76G Series from Quectel are GNSS Modules that support GPS, GLONASS, BDS, Galileo, and QZSS constellations. They have a cold start of 15 s, a warm start of 2 s, and a hot start of 2 s. These GNSS modules have an acquisition sensitivity of -147 dBm, tracking sensitivity of -166 dBm, and reacquisition sensitivity of -159 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 200 W GaN SSPA from 7.9 to 8.4 GHz for SATCOM Applications | |
SATCOM Amplifier System
from TTI
|
| The GaN X SSPA from TTi is a GaN-Based Solid-State Power Amplifier (SSPA) that operates from 7.9 to 8.4 GHz. It delivers a saturated output power of 200 W (~53 dBm) with more than 60 dB of gain. This amplifier has excellent linearity for maximum useable output power to provide customized linearisation independent of the modulation method used. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5-Channel GPS Anti-Jam System for Ground and Marine Applications | |
GNSS Anti-Jamming Solution
from Mayflower Communications
|
| The NavGuard 501® SAGE from Mayflower Communications is a GPS Anti-Jam System. It has a 5-channel design and provides simultaneous dual frequency (L1 and L2) GPS protection. This system utilizes a 3.5-inch diameter FRPA footprint and offers an affordable SWaP-C alternative over larger and more expensive existing anti-jam systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz, 7 Gbps Wi-Fi 6E Point-to-Multipoint Backhaul Radio for Dense Environment | |
Microwave Backhaul Radio Links
from Mimosa
|
| The A6 from Mimosa is a Point-to-Multipoint Backhaul Radio that operates from 5150 to 6425 MHz for Wi-Fi 6E applications. It supports 20, 40, 80, and 160 MHz channels, 8x8 multi-user MIMO, and delivers a data rate of up to 7 Gbps (UL/DL). This access point utilizes BPSK-1024QAM, OFDMA, and other PHY layer technologies to ensure sufficient AP capacity to handle large populations in dense urban/rural environments. |
| |
Download Datasheet
Product Details | |
|
