| New RF and Microwave Products this Week . |
|
|
|
|
|
|
|
| USB/Ethernet Controlled mmWave Signal Generator from 10 MHz to 30 GHz | |
Signal Generator
from Mini Circuits
|
| The SSG-30GHP-RC from Mini-Circuits is an mm-Wave Signal Generator with a frequency range from 10 MHz to 30 GHz. It delivers an output power of up to +27 dBm with a phase noise of -130 dBc/Hz (at 10 kHz offset) and has a frequency resolution of 0.2 Hz. This signal generator can be used for the characterization of high-power millimeter wave components and systems. It provides a reliable high-power signal, which reduces the need for external amplification and gain control. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact, Low Cost, Low Noise GPS/GNSS Disciplined Rubidium Oscillator | |
GPS/GNSS Disciplined Oscillator
from Safran Electronics & Defense
|
| The LNRClok-1500 from Safran is compact, smart, low cost, low noise GPS/GNSS-disciplined Rubidium oscillator (GPSDO) with an optional integrated GPS / GNSS receiver. This 10 MHz Disciplined Rubidium Oscillator delivers a sine wave output with a phase noise of -145 dBc/Hz at 1 kHz offset, has harmonics of less than -40 dBc and spurious levels of below -80 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Sponsored by Advanced Test Equipment Corporation | | | |
|
|
| Bluetooth 5.2 SoC for Ultra-Compact RF Modules | |
Wireless SoC
from Nordic Semiconductor
|
| The nRF52805 from Nordic Semiconductor is a Bluetooth 5.2 System-on-Chip (SoC) which is designed for small two-layer PCB designs. This SoC has been developed for cost-constrained applications and is the perfect choice for applications such as beacons, disposable medical devices, sensors, styluses, and presenters. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount 180°, 1:2 RF Balun from 10 MHz to 9 GHz | |
Balun
from Marki Microwave
|
| The BALE-0009SMG from Marki Microwave is an RF Balun that operates from 10 MHz to 9 GHz. It has an impedance ratio of 1:2 (balanced to unbalanced transformer) and transforms 50 ohm to 100 ohm differential outputs. This balun can handle an input power of up to 1 W, has an insertion loss of 4.5 dB (as a mode converter) and a nominal phase shift of 180°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 75 W Solid State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 75S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers an output power of more than 75 W with a small signal gain of 54 dB. This Class A SSPA has spurious levels of -73 dBc and harmonic distortion of -30 dBc. The low level of spurious signals and linearity make it ideal for use in 5G testing applications and as a driver in testing wireless and communication components and subsystems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W RF Amplifier System from 26.5 to 40 GHz | |
RF Amplifier
from Maury Microwave
|
| The MPA-26G5-40G-40 from Maury Microwave is an RF Amplifier System that operates from 26.5 to 40 GHz. It delivers a saturated output power of more than 40 W with a gain of higher than 43 dB. The amplifier can handle up to 0 dBm of input power and has a VSWR of less than 2:1. It uses state-of-the-art GaN transistors and has integrated protection circuitry. |
| |
Download Datasheet
Product Details | |
|
|
|
| Surface-Mount Noise Source from 200 kHz to 5 GHz | |
Noise Source
from Noisecom
|
| The NC520 from Noisecom is a Noise Source that operates from 200 kHz to 5 GHz. It produces white gaussian noise with an output power of more than 25 dB ENR (-143 dBm/Hz) and has a crest factor of 5:1. This noise source contains all bias circuits and requires no external components. It has extremely flat output power versus frequency characteristic which is insensitive to temperature and voltage variations. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
| Sponsored by Advanced Test Equipment Corporation | | |
|
|
| Detector Log Video Amplifier from 8 to 10 GHz | |
DLVA
from Quantic PMI (Planar Monolithics)
|
| The DLVA-8G10G-75-50-SFF from Quantic PMI (Planar Monolithics) is a Detector Log Video Amplifier (DLVA) that operates from 8 to 10 GHz. It has a dynamic range from -75 to 0 dBm and a tangential signal sensitivity (TSS) of -78 dBm. This DLVA has a log linearity of ±1.8 dB and a log slope of 50 mV/dB. It has a rise time of 30 ns, a fall time of 150 ns, and a recovery time of 500 ns (for 10 µs pulse width). |
| |
Download Datasheet
Product Details | |
|
|
|
| Man-Portable Interference Hunting and RF Monitoring Receiver from 9 kHz to 18 GHz | |
RF Monitoring Receiver
from CRFS
|
| The RFeye StormCase from CRFS is a man-portable integrated system designed for easy mobile spectrum monitoring from a fully autonomous and ruggedized stand-alone unit that operates from 9 kHz to 18 GHz. It incorporates an RFeye Node 100-8 or 100-18, internal and external antenna ports, high-performance hot-swappable rechargeable MIL-SPEC battery and integrated 512 GB SSD memory for high-volume data collection during mobile field operations. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3-Way GaAs Power Divider MMIC from 6 to 18 GHz | |
Power Divider
from Sainty-Tech Communications Limited
|
| The BW1649 from Sainty-Tech Communications Limited is a 3-Way GaAs Power Divider MMIC that operates from 6 to 18 GHz. It can handle an input power of up to 33 dBm, provides an isolation of 22 dB and has an insertion loss of less than 1.5 dB. This in-phase (0°) power divider has a return loss of 20 dB (input) and a phase balance of 2 degrees. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Way Power Divider/Combiner from 0.698 to 2.7 GHz | |
Power Divider
from MECA
|
| The 806-12-1.700V from MECA is a 6-Way Power Divider/Combiner that operates from 0.698 to 2.7 GHz. It can handle an input power of up to 40 W, provides an isolation of 23 dB and has an insertion loss of 0.8 dB. This power divider/combiner has a VSWR of 1.30:1, an amplitude balance of ±0.2 dB and a phase balance of ±6°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 500 W Directional Couplers from 0.4 to 13 GHz | |
Directional Coupler
from RD Microwaves
|
| The C1-A60E from RD Microwaves are Directional Couplers that operate from 0.4 to 13 GHz. These couplers are available in coupling values of 5, 8, 10, 15, 20, and 30 dB with directivity of up to 20 dB and have an insertion loss of less than 4 dB. The directional couplers can handle an average input power of 500 W, a peak input power of 1 kW and have a PIM of -160 dBc (2x43 dBm carrier). |
| |
Download Datasheet
Product Details | |
|
|
|
| 300 W, 20 dB Wideband RF Tappers from 340 to 5850 MHz | |
RF Tapper
from Comba Telecom
|
| The CO-FSxx-OMD300C(I) Series from Comba are Wideband RF Tappers that operate from 340 to 5850 MHz covering Public Safety Band (UHF, 700/800), CBRS and LTE-U/LTE-LAA frequencies. They have a coupling coefficient from 5 to 20 dB with a coupled loss of less than 1.8 dB and a VSWR of less than 1.4:1. These tappers can handle a peak input power of 3000 W, an average input power of 300 W and has a PIM of less than -161 dBc (at 2x43 dBm). |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G Massive IoT SiP Module for LTE-M/NB-IoT Platforms | |
Cellular Module
from Skyworks Solutions
|
| The SKY66431-11 from Skyworks is a Multi-Band Multi-Chip System-in Package (SiP) for 5G Massive IoT (LTE-M/NB-IoT) platforms. It integrates the entire RF front end, transceiver, power management, crystals, memory, MCU, and baseband modem for an LTE multi-band radio. This SiP has been optimized for LTE-M/NB-IoT half-duplex operation (HD-FDD). It can deliver a downlink data rate of up to 300 Kbps (LTE-M) and an uplink data rate of up to 1.1 Mbps (LTE-M). |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 kHz to 20 GHz Spectrum Analyzer with 10GbE Ethernet Interface | |
RF Spectrum Analyzer
from Signal Hound
|
| The SM200C from Signal Hound is a Spectrum Analyzer and Monitoring Receiver that operates from 100 KHz to 20 GHz with a 10 Gigabit Ethernet SFP+ port to enable communication with a PC over long distances using a fiber optic cable. This high-performance device provides 160 MHz of instantaneous bandwidth I/Q streaming over 10GbE. It has a sweep rate of 1 THz/sec at a resolution bandwidth (RBW) of 30 kHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| EMI Test Receiver from 1 Hz to 44 GHz for EMC Compliance Testing | |
EMI Receiver
from Keysight Technologies
|
| The N9048B from Keysight Technologies is a standards-compliant EMI test receiver equipped with an RF pre-selector and LNA designs. It has been developed to shorten the overall test time and easily perform gapless signal capture and analysis with real-time scan (RTS) capabilities. This EMI Test Receiver and diagnostic signal analyzer operate from 1 Hz to 44 GHz. |
| |
Download Datasheet
Product Details | |
|
|
|
| Absorptive SP2T PIN Diode Switch from 30 to 90 GHz | |
RF Switch
from RF-Lambda
|
| The RFSP2TA3090G from RF Lambda is an Absorptive SP2T PIN Diode Switch that operates from 30 to 90 GHz. It has a switching speed of 250 ns and provides an isolation of 30 dB. This switch can handle an input power of up to 15 W and has an insertion loss of less than 11 dB. It has a fast-switching speed over the operating frequency band and has a built-in TTL-compatible driver. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W IP67-Rated Triplexer from 617 to 4200 MHz | |
Triplexer
from Microlab
|
| The BK-3008E from Microlab is a Triplexer that operates from 617-960 MHz, 1695-2690 MHz, and 3400-4200 MHz. It has been designed to allow efficient combining or splitting of the standard cellular bands and shared bands such as CBRS and C-Band for use in small cell or D-RAN infrastructure. This triplexer can handle an input power of 250 W per port, provides an isolation of 46 dB, and has an insertion loss of less than 0.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ku-Band Block-up Converters from 12.75 to 14.5 GHz | |
Block Up Converter
from Amkom Design Group Inc
|
| The ASKU (S, L, D) Series from Amkom Inc. are Ku-Band Block-up Converters that convert an input IF frequency from 950 - 1450 MHz or 950 - 1700 MHz to an output RF frequency from 12.75 - 14.5 GHz with 11.80 GHz, 13.05 GHz or 12.80 GHz local oscillators.These BUCs deliver a saturated output power of 20 W (43 dBm) and a linear power of 16 W (42 dBm) with a gain of 70 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 8-Port Narrow Beam Panel Antenna from 3400 to 3800 MHz | |
Base Station Antenna
from Alpha Wireless
|
| The AW3946-E-F from Alpha Wireless is an 8-Port Panel Antenna that operates from 3400 to 3800 MHz. This ±45° slant linear polarized antenna provides a gain of 19.7 dBi and has a VSWR of less than 1.5:1. It has an azimuth beamwidth of 33° (±3°) with an azimuth beam squint of less than 3 degrees° and an elevation beamwidth of 6.5° (±0.5°) with an electrical downtilt from T0° - T10°. |
| |
Download Datasheet
Product Details | |
|
