| Featured Products this Week . |
|
|
| USB-Powered Real-Time Spectrum Analyzer from 9 kHz to 6 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The BB60D from Signal Hound is a Spectrum Analyzer that operates from 9 kHz to 6 GHz. It streams 140 MB/sec of digitized RF signals to a PC over the USB 3.0 interface, providing an instantaneous bandwidth of 27 MHz, and sweeping at speeds of 24 GHz/sec. This analyzer performs spectrum analysis using the proprietary application programming interface (API) which can execute up to 1.2 million FFT spectrums or 320 million FFT points every second, delivering real-time spectrum data. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| USB Controlled Programmable Attenuator from 200 to 8000 MHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50P-2111 from JFW Industries is a Bi-Directional, Solid-State Programmable Attenuator that operates from 200 to 8000 MHz. It has an attenuation range from 0 to 95 dB with a step size of 1 dB (1, 2, 4, 8, 16 and 32 dB step options available). The attenuator has an insertion loss of less than 7 dB and a typical switching speed of 0.7 µs. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 5 GHz Integrated Front-End Module for Wi-Fi 5 Applications | |
Front End Module
from Qorvo
|
| The QPF4518 from Qorvo is a 5 GHz Integrated Front End Module (FEM) that is designed for Wi-Fi 5 applications. It consists of a 5 GHz power amplifier (PA), a single pole two-throw switch (SP2T), and a bypassable low-noise amplifier (LNA). The receive path of this module is pinned out so that external filtering can be added in the optimal position. This FEM has integrated die level filtering for 2nd and 3rd harmonics as well as 2.4 GHz rejection for DBDC operation. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Copper Mountain Technologies | | |
|
|
| Coexistence BAW Filter for Wi-Fi 6E/7 Applications | |
Band Pass Filter
from Akoustis
|
| The A10655 from Akoustis is a Coexistence BAW Filter that is designed for Wi-Fi 6E and Wi-Fi 7 applications. It can cover the 5 GHz U-NII-1 thru U-NII-3 bands and 6 GHz U-NII-5 thru 8 bands. This filter has a passband of 665 MHz and exhibits high-power handling capabilities necessary for the demanding requirements of Wi-Fi 6E and 7 standards. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| AEC-Q100-Qualified Automotive-Grade Precision GNSS Chips | |
GNSS System on Chip
from u-blox AG
|
| The UBX-M8030 from u-blox are Precision GNSS Chips that have been designed to provide good sensitivity and fast acquisition times for GNSS systems. They can receive concurrent signals from up to three GNSS systems (GPS/Galileo with either BeiDou or GLONASS). They can support the capability to simultaneously receive signals from more than one constellation to allow for high positioning accuracy in urban canyons, even with weak signals and high dynamic conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| Detector Log Video Amplifier (DLVA) from 2 to 18 GHz | |
DLVA
from Crane Aerospace & Electronics
|
| The STDLVA-90001 from Crane Aerospace and Electronics is a Detector Log Video Amplifier (DLVA) that operates from 2 to 18 GHz. It features a dual detector amplified design with a unique amplification and summing technique. The amplifier has an operating dynamic range from -67 to +5 dBm with ± 1.5 dB linearity and a maximum tangential signal sensitivity (TSS) of -67 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4-Port Sector Antenna from 5.2 to 5.8 GHz for MIMO Applications | |
Base Station Antenna
from ITELITE
|
| The PRO-SEC-XL5018DPX2 from ITELITE is a 4-Port Sector Antenna that operates from 5.2 to 5.8 GHz. This horizontal/vertically-polarized antenna provides a gain of 18 dBi (per port), has a front-to-back ratio of more than 30 dB, and a VSWR of less than 2:1. It has a horizontal beamwidth of 90° and a vertical beamwidth of 6°. This antenna provides a port-to-port isolation of better than 33 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 400 W TWT Power Amplifier from 12.75 to 14.50 GHz | |
SATCOM Amplifier System
from ND SatCom GmbH
|
| The HPA 4412A from ND SATCOM is a Power Amplifier that operates from 12.75 to 14.50 GHz. It delivers a TWT output power of more than 400 W with a small signal gain of more than 72 dB. This amplifier has an AM/PM conversion of 6°/dB (at rated output power) and provides a harmonic output suppression of -80 dBc (at rated power). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Basic Spectrum Analyzer from 9 kHz to 4 GHz for Essential RF Applications | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The N9321C from Keysight is a Basic Spectrum Analyzer (BSA) that operates from 9 kHz to 4 GHz. It has an analysis bandwidth of up to 1 MHz, a phase noise of -90 dBc/Hz (@10 kHz offset), and a DANL of -152 dBm (@1 GHz). This BSA is built to address essential applications and offers proven test efficiency, best-in-class usability, and flexibility to adapt to new requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| StabilityFlex 12" SMA Cable Assembly from DC to 26.5 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The StabilityFlex™ SF-SMA-MM-12-LP from Maury Microwave is an SMA Male Cable Assembly the operates from DC to 26.5 GHz. It follows the proposed IEEE high-frequency connector/adapter color convention to offer clear indications of compatibility and intermatability. This low-profile cable assembly is part of the ColorConnect™ family which makes it easier to avoid and eliminate damaged equipment, degraded equipment reliability, degraded performance, and lengthy maintenance times due to improper mating (and attempted mating) of incompatible interconnects. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5 W, WPC Qi 1.2.4 Monolithic Wireless Power Transmitter | |
Wireless Charging Transmitter
from STMicroelectronics
|
| The STWBC86 from STMicroelectronics is a Monolithic Wireless Power Transmitter that is compatible with the WPC Qi 1.2.4 specification. It delivers an output power of 5 W and supports robust ASK & FSK communication. This wireless power transmitter has a 32-bit, 64 MHz ARM Cortex micro-controller, 8 KB SRAM, 10-bit A/D converter, and on-chip current sense. |
| |
Download Datasheet
Product Details | |
|
|
|
| Whipless Multiband Cellular Antenna from 600 to 2700 MHz | |
Antenna
from PCTEL
|
| The BMLPVDB700/2500 from PCTEL is a Multiband Cellular Antenna that operates from 600-960 MHz, 1710-2170 MHz, and 2300-2700 MHz. This linearly polarized antenna provides a gain of 1.2 dBi with an efficiency of more than 50% and has a VSWR of less than 2.0:1. It can handle an input power of up to 2.5 W and uses PTFE and air dielectric to minimize insertion losses and maximize radiated power. |
| |
Download Datasheet
Product Details | |
|
