| New RF and Microwave Products this Week . |
|
|
| Portable, USB-Powered Real-time Spectrum Analyzer from 100 kHz to 14.5 GHz | |
RF Spectrum Analyzer
from Signal Hound
|
| The SP145 from Signal Hound is a Real-time Spectrum Analyzer with a frequency range from 100 kHz to 14.5 GHz. It has a sweep speed of 200 GHz/s, a streaming bandwidth of 40 MHz, and a display noise average (DANL) of -160 dBm. This RTSA is ideal for use in general-purpose RF test and measurement, phase noise characterization, EVM measurements, airborne RF measurement systems, spectrum monitoring and many other applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Versatile, Multi-Channel Software-Defined Radio from 30 MHz to 6 GHz | |
Software Defined Radio
from Epiq Solutions
|
| The Sidekiq™ NV800 from Epiq Solutions is a Software-Defined Radio (SDR) that operates from 30 MHz to 6 GHz (can be extended to 18 GHz). It consists of a dedicated RF transmitter with 8 RF receivers, each with a bandwidth of 50 MHz, for a total bandwidth of 400 MHz. This SDR is suitable for spectrum monitoring, wireless detection, direction finding, geolocation, SIGINT, C5ISR, counter-UAS, and other mission-critical applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Thin-Film RF Attenuators Chips from DC to 8 GHz | |
Fixed Attenuator
from Spectrum Control
|
| The KPA1020S from Spectrum Control are RF Attenuators that operate from DC to 8 GHz. They are available in attenuation values from 1 to 20 dB with an attenuation accuracy of ±2 dB. These 50-ohm thin-film attenuators are designed to reduce the signal power uniformly at different frequencies, temperatures, and power levels. |
| |
Download Datasheet
Product Details | |
|
|
|
| 218 W GaN TWTA-Replacement Spatial Combining Amplifier from 2 to 18 GHz | |
RF Amplifier
from Qorvo
|
| The QPB0220N from Qorvo is a GaN Solid-State Spatial Combining Amplifier that operates from 2 to 18 GHz. It delivers a saturated output power of 218.8 W (~53.4 dBm) with a small signal gain of 16 dB and a power-added efficiency (PAE) of 19.5%. This power amplifier is based on Qorvo’s patented and field-proven Spatium combining technology that provides excellent performance in a light, rugged, compact module, thereby reducing the total cost of ownership compared to alternative technologies. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3.6 W InGaP HBT Power Amplifier from 663 to 716 MHz | |
RF Amplifier
from Guerrilla RF
|
| The GRF5606 from Guerrilla RF is a Two-Stage InGaP HBT Power Amplifier that operates from 663 to 716 MHz. It delivers an output P1dB of 3.6 W (~35.6 dBm) with a small signal gain of 27.5 dB. The amplifier exhibits exceptionally native linearity, making it ideal for transmitter applications that typically do not employ digital pre-distortion correction schemes. This power amplifier has a rugged design that offers resilience to mismatched loads. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.5 kW Solid-State Power Amplifier from 10 kHz to 250 MHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2080E-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 10 kHz to 250 MHz. It delivers a saturated output power of 1500 W with a power gain of more than 62 dB. This Class A/AB linear amplifier has built-in protection circuits and provides extensive monitoring parameters for all modulations, standards, forward/reflected power (in Watts & dBm), VSWR, voltage, current, and temperature for optimum reliability & ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Masach | | 1/2 Piece Drawn Seamless EMI/RFI Shields | | The MS110-10 Series from Masach are Drawn-Seamless EMI/RFI Shields for high-frequency RF applications. They are available in 1 or 2-piece configurations made with tin-plated steel or nickel-silver material. The Nickel-Silver series have high corrosion resistance and are used in sensitive-harsh environments in a variety of industries such as medical devices, aerospace, automotive, etc. Click here to learn more. | | | |
|
|
| 40 GHz Multiport Contact for Military Avionics and EW Applications | |
RF Connector
from Times Microwave Systems
|
| The M8M™ Multiport Contact from Times Microwaves System that operates up to 40 GHz. It is designed for advanced military avionics and electronic warfare (EW) applications that require extremely restricted space constraints and rising operating frequencies. This contact has a unique construction and is ideal for high-vibration and harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| GaN-Based Waveguide Low Noise Amplifier from 90 to 96 GHz | |
RF Amplifier
from AT Microwave
|
| The AT-LNA-9096-1605GNT from AT Microwave is a GaN Low Noise Amplifier that operates from 90 to 96 GHz. It delivers a gain of 15 dB with a noise figure of less than 6 dB and a saturated output power of 18 dBm. This LNA requires a DC supply from 8 to 12 V and consumes 60 mA of current. It can be used both as a general driver and a low noise amplifier (LNA). |
| |
Download Datasheet
Product Details | |
|
|
|
| 15.7 GHz Ku-Band Low-Phase Noise, Phase-Locked DRO | |
PLDRO
from Nanowave Technologies
|
| The NWO1570-12-02 from NANOWAVE Technologies is a 15.7 GHz Ku-Band Phase-Locked DRO Source. It has a phase noise of -150 dBc/Hz (at 1 MHz offset) and -170 dBc/Hz (at 10 MHz). This DRO source uses Nanowave’s proprietary HMIC process that uses chip and wire integration for lower insertion loss and improved heat dissipation necessary to achieve ultra-low phase noise over operational temperature ranges from 25°C to 70°C. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Test Application Software for FR1/FR2 5G Including RedCap and NTN | |
RF Test Set
from Keysight Technologies
|
| The S8711A UXM 5G Test Application from Keysight is a software interface for the UXM One Box Tester to analyze 5G NR chipsets and devices. It is an interactive real-time testing tool that covers the full chipset and device development workflow from early prototype testing through integration and verification. This software allows users to fully control the network environment and validate customized testing campaigns through RF performance and functional KPI. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 30 W, Class-A Solid-State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 30S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a CW output power of more than 30 W with a small signal gain from 46 to 50 dB. This Class-A SSPA provides protection from input overdrive beyond 0 dBm as well as protection from various failure conditions including over-temperature and power supply faults. |
| |
Download Datasheet
Product Details | |
|
|
|
| High Power High Linearity SP4T Switch from DC to 4.2 GHz | |
RF Switch
from MACOM
|
| The MASW-011127 from MACOM is an SP4T Switch that operates from DC to 4.3 GHz. It has an insertion loss of less than 0.8 dB and provides up to 60 dB of isolation. The switch can handle up to 43 dBm of power and has a settling time of 0.9 µs.It has integrated control circuitry with 1.8 V logic and does not require external matching components. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Balun Die from 3 to 18 GHz | |
Balun
from mmTron Inc
|
| The TMC810-1 from mmTron is an RF Balun that operates from 3 to 18 GHz. It converts a balanced signal to an unbalanced signal (and vice-versa) with a phase match of 1° and an amplitude balance of 0.4 dB. This 50-ohm balun is fabricated with high power, high Q GaAs process, and has a common mode rejection of 35 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 dB Fixed Attenuator from DC to 50 GHz | |
Fixed Attenuator
from MECA
|
| The 669-20-1 from MECA is a Fixed Attenuator that operates from DC to 50 GHz. It provides an attenuation of 20 dB with an accuracy of ±0.5 to ±2 dB. The attenuator can handle an average input power of up to 0.5 W and has a VSWR of less than 1.75:1. It is available as a connectorized module that measures 1.12 x 0.312 inches and has 2.4mm (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Non-Hygroscopic Polystyrene Absorber from 80 MHz to 40 GHz | |
Microwave Absorber
from ETS-Lindgren
|
| The DuraSorb DS-750 from ETS-Lindgren is a Polystyrene Absorber for frequencies from 80 MHz to 40 GHz. It can handle an input CW incident plane wave power of 250 V/m or a CW power of 600 V/m for 5 minutes with a 10-minute cool-down period. This absorber is manufactured by injecting uniformly loaded lossy materials in predetermined geometric shapes to produce the desired performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ferrite-Based Junction Isolator from 64 to 71 GHz | |
Waveguide Isolator
from HXI
|
| The HMI12-387-67.5-7.0 from HXI is an RF Isolator that operates from 64 to 71 GHz. It provides an isolation of 16 dB and has an insertion loss of 0.7 dB. This ferrite-based junction isolator can handle an input power of 1.5 W and has a VSWR of 1.44:1. It is available in a module with a WR-12 waveguide interface and is ideal for testing applications of integrated circuits and modules in unlicensed bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| TVAC RF Isolator from 10.7 to 14.8 GHz | |
RF & Microwave Isolator
from DiTom Microwave
|
| The DVI1014 from DiTom Microwave is a TVAC RF Isolator that operates from 10.7 to 14.8 GHz. It provides an isolation of more than 20 dB and has an insertion loss of less than 0.3 dB. This isolator can handle an average input power of 10 W, peak input power of 50 W, and reflective power of 2 W. It is available as a module with low outgassing that measures 0.455 x 0.500 x 0.700 inches and has SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rackmount RF Shield Test Box from 20 MHz to 12 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-8724 from RF Electronics is an RF Shield Test Box that is designed for the frequency range from 20 MHz to 12 GHz. It has a thick RF-absorbing foam that deadens standing waves and reflections. This test box has shielded power filters for powering devices placed inside the box while blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Airborne, Electronically Steerable SATCOM Antenna from 10.7 to 14.5 GHz | |
SATCOM Antenna
from Get SAT Ltd
|
| The Lesa Blade Ku Aero from Get SAT is an Airborne SATCOM Antenna that operates from 10.7 to 12.75 GHz (Rx) and 13.75 to 14.5 GHz (Tx). This low-profile fully electronically steerable antenna (ESA) has no moving parts and is ideal for integration on any aviation platform. It is designed for in-flight connectivity with a short acquisition time and allows for high dynamic tracking. |
| |
Download Datasheet
Product Details | |
|
|
|
| 360° Programmable Voltage Controlled Phase Shifters from 1 to 8 GHz | |
Analog Phase Shifter
from Fairview Microwave
|
| The FM82P200X Series from Fairview Microwave are Voltage Controlled Phase Shifters that operate from 1 to 8 GHz. They can handle an input power of up to 1 W (30 dBm) and provide phase shift up to 360°. These 5-bit or 6-bit phase shifters can be programmed using analog and TTL interfaces. They are available as a rugged military-grade module that has been designed to meet environmental test conditions for altitude, vibration, humidity, and shock. |
| |
Download Datasheet
Product Details | |
|
|
|
| 75-Ohm Straight BNC-Jack to BNC-Plug Adapter for 4K UHD Video Applications | |
In Series RF Adapter
from Amphenol RF
|
| The 112532-12G from Amphenol RF is a BNC-Jack to BNC-Plug Adapter. This 75-ohm in-series adapter has a push-on straight bulkhead design. It is designed for 12 Gbps-SDI video applications and is optimized for 4K Ultra HD broadcast video, providing fully intact signal transmission on a single channel. The adapter has a Brass body with a Nickel finish and Phosphor Bronze contact with a Gold finish. |
| |
Download Datasheet
Product Details | |
|
