PREV
3 February, 2016
NEXT
New RF & Microwave Products this Week
3 Feb, 2016 - everything RF Newsletter| Sponsored by Inmet (API Technologies) | | | | | | | | |
|
|
| New RF & Microwave Products this week |
|
|
| | 100 Watt Reflective SPDT Switch for Cellular Applications | RF Switch from MACOM | | The MASW-011060 from MACOM is a high power PIN diode SPDT switch that operates from 0.5 GHz to 6 GHz with high linearity in common anode configuration. It has an insertion loss of 0.5 dB at 4 GHz, an isolation of 35 dB at 4 GHz and can handle up to 100 W of CW power at a base plate temperature of 85 degree C. This switch is ideal for broadband, MIL-COM, IED, and cellular applications that require higher CW and pulsed power operation. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | GNSS Front-end Low-Noise Amplifier | RF Amplifier from Skyworks | | The SKY65605-21 from Skyworks is a MMIC front-end LNA that operates from 1.559 GHz to 1.606 GHz. It has been designed for BeiDou Satellite Navigation Systems/GPS/GNSS receiver applications. The amplifier provides high linearity, a small signal gain of up to 19 dB, low noise figure of under 0.6 dB and an input compression point (P1dB) of -14.5 dBm. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 100 kHz to 26 GHz High-Power Signal Generator | Signal Generator from AnaPico | | The APSIN26TP is a fast-switching, low phase noise signal generator that operates from 100 kHz up to 26 GHz. It provides up to 26 dBm of power, with a SSB phase noise of -115 dBc/Hz with a 20 kHz offset. This is a reliable and powerful alternative to expensive high-end microwave signal generators, where compact size, high output power, and excellent microwave performance at an attractive cost is required. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| Sponsored by Inmet (API Technologies) | | | | | | | | |
|
|
| | 200 kHz to 60 MHz Bias Tee | Bias Tee from UMCC | | The BT-H060-LS is a Bias Tees from UMCC that operate from 200KHz to 60MHz. It has a low insertion loss of 0.15 dB, an isolation of over 40 dB and a VSWR of 1.20:1 though the band. It has a bias voltage of up to 50 V and a bias current of up to 850 mA. The BT-H060-LS can handle up to 50 W of RF power and is available with SMA Female Connectors for the RF/DC ports and solder pin for the bias connection. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 6.265 GHz Frequency Synthesizer for Radar Applications | Frequency Synthesizer from Z-COMM | | The SFS6265A-LF is a 6265 Hz fixed frequency synthesizer with an external 100 MHz reference oscillator that operates in the C Band. The synthesized signal can have a power level of up to 3 dBm, harmonics of -20 dBc and spurious suppression of -65 dBc. The synthesizer requires a supply of 5 Vdc while drawing 35 mA of current, PLL voltage of 3 Vdc while drawing 11mA of current. | | | | Product Details |
|
| | | |
|
|
| | 5 MHz to 67 GHz Broadband Balun | Balun from HYPERLABS Inc. | | The HL9407 is a broadband balun that operates from 5 MHz to 67 GHz. This RoHS-compliant balun has 1.85 mm connectors, and is ideal for applications such as 40+ Gbps communications systems, modulator drivers, high-speed analog-to-digital converters, and single-ended to differential data conversion. It is bidirectional, so it can also be used as a high-performance signal combiner. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 136 MHz to 2000 MHz RF Filter | High Pass Filter from Anatech Electronics | | The AE136H9874 from Anatech Electronics is a high pass filter with a passband from 136 MHz to 2000 MHz. The filter has an insertion loss of less than 1 dB, return loss over 14 dB with rejection of more than 50 dB. It can handle up to 50 W of power and is matched to 50 Ohms. The AE136H9874 is available with Type N female connectors in a module that measures 3.82 x 2.00 x 1.50 inches. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| | 43 GHz Spectrum/Signal Analyzer Family | RF Spectrum Analyzer from Anritsu | | The MS2830A is a spectrum/signal analyzer from Anritsu that is available in 3.6 GHz, 6 GHz, 13.5 GHz, 26.5 and 43 GHz frequency configurations. They are compatible with Anritsu’s External Mixer MA27xxC series, enabling millimeter-wave spectrum analysis to 325 GHz. The analyzers have excellent dynamic range, a DANL of -153 dBm, IP3 of 15 dBm with ±0.3dB level accuracy and a SSB phase noise of -118 dBc/Hz. | | | | Download Datasheet | Product Details |
|
| | | |
|
|
| About everything RF | | everything RF is a product discovery platform for RF & Microwave products/Services. We list over 100,000 Products from more than 200 Companies across 200 Categories in our database and enable engineers to search for them using our customized parametric search tool. |
|
|
|
