| Featured Products this Week . |
|
|
| 1.0 mm Flexible Cable Assemblies from DC to 110 GHz | |
RF Cable Assembly
from HASCO Components
|
| The Littlebend HLB055-WP-WP Series from HASCO Components are Flexible Cable Assemblies that operate from DC to 110 GHz. They have 1.0mm connectors and are designed for demanding microwave interconnect requirements. These cable assemblies ensure excellent amplitude and phase stability, and are well-suited for dense microwave packaging applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port USB Vector Network Analyzer from 100 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The C2209 from Copper Mountain Technologies is a 2-port modular vector network analyzer that operates from 100 kHz to 9 GHz. The VNA can measure all S-parameters - S11, S21, S12, S44 and can be controlled using any Windows PC or laptop. It has a dynamic range of up to 162 dB (1Hz IF BW), directivity of 46 dB and sweep speeds of as low as 10 microseconds per point. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF Spectrum Analyzer from 450 MHz to 40 GHz for 5G FR1/FR2 | |
RF Spectrum Analyzer
from EXFO Inc
|
| The 5GPro Spectrum Analyzer from EXFO is a Dual-band RF Spectrum Analyzer that operates at the two frequency bands, 450 MHz to 6 GHz (5G FR1 - Low & Mid-band) and 24.25 to 40 GHz (5G FR2 - mmWave). The spectrum analyzer offers real-time spectrum analysis (RTFA) for quick characterization of wireless signals and detection of intermittent interference. |
| |
Download Datasheet
Product Details | |
|
|
|
| Square Air Core Inductors from 330 to 500 nH | |
RF Inductor
from Coilcraft
|
| The 2929SQ Series from Coilcraft are Square Air Core Inductors with inductance values from 330 to 500 nH. They do not use a magnetic core which enables high Q and the low losses for high-frequency applications. These inductors have a Q factor of up to 180 at 50 MHz and can handle current up to 4.7 A. |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-GHz/S-Band/ISM Low-Power Half-Duplex LoRa Transceiver | |
RF Module
from Semtech
|
| The LR1121 from Semtech is a LoRa Transceiver that operates from 150 – 960 MHz (sub-GHz), 1.9 to 2.1 GHz (S-Band), and 2.4 GHz (ISM). It is a LoRa/(G)FSK half-duplex RF transceiver that provides multi-band LoRa and Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) communication. This transceiver is ideal for use in smart meters, building automation, agricultural sensors, smart cities, retail store sensors, asset tracking and a number of other applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 5G (SA) RedCap Modules | |
Cellular Module
from Fibocom
|
| The FG132-NA Series from Fibocom are 5G RedCap Modules that are backward compatible with LTE Cat 4 networks. They support a downlink data speed of 220 Mbps and an uplink data speed of 100 Mbps. These modules are compliant with 3GPP Release-17 and support 5G standalone architecture along with 5G slicing. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 8x8 Butler Matrix from 0.7 to 6 GHz | |
Butler Matrix
from Spectrum Control
|
| The 8401-8-5 from Spectrum Control is an 8x8 Butler Matrix that operates from 0.7 to 6 GHz. It can handle an input power of 5 W (~37 dBm), has an insertion loss of less than 16 dB, and provides a port-to-port isolation of 20 dB. This butler matrix is designed to transfer a signal reciprocally from any of the eight input ports to any of the eight output ports with an output phase accuracy of ±20° (at 5 GHz). |
| |
Download Datasheet
Product Details | |
|
|
|
| 40 W GaN Hybrid Power Amplifier Module from 3400 to 3800 MHz | |
RF Amplifier
from RFHIC
|
| The SDM37003-30H from RFHIC is a 2-Stage GaN Hybrid Power Amplifier Module that operates from 3400 to 3800 MHz. It delivers a saturated output power of 40 W with a power gain of 40 dB and a drain efficiency of 18%. This amplifier has been developed for 5G C-Band applications. It is internally matched to 50 ohms and requires a DC supply voltage of 48 V to operate. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1kW Solid-State Power Amplifier from 1 to 6 GHz for EMC Testing | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The Model 1000S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW output power of up to 1000 W with a small signal gain of 66 dB. This SSPA has spurious levels of -73 dBc and harmonic distortion of -30 dBc. The low spurious levels and high linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. |
| |
Download Datasheet
Product Details | |
|
|
|
| Distributed Low Noise Amplifier from DC to 18 GHz | |
RF Amplifier
from Marki Microwave
|
| The ADM-8344 from Marki Microwave is a Distributed Low Noise Amplifier that operates from DC to 18 GHz. It provides a small signal gain of 18 dB with a noise figure of less than 3.2 dB and has a P1dB of 18 dBm. The amplifier has a reverse isolation of 40 dB with excellent return losses. It requires a DC supply from 4 to 8 V and consumes 130 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Silicon-on-Insulator SPDT Switch Die from DC to 40 GHz | |
RF Switch
from Otava, Inc
|
| The OTSW100 from Otava is an SPDT Switch that operates from DC to 40 GHz. It has a switching time of 175 ns and a settling time of 500 ns with a control voltage requirement of +/- 2.5 V. This voltage-controlled switch provides an isolation of more than 35 dB and has an insertion of less than 1.5 dB. It uses Silicon-on-Insulator (SOI) technology and is available as a bare die that measures 2.546 x 2.161 mm. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low Noise Amplifier from 10 MHz to 20 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PLNA-30-10M20-SFF-DCSMA from Quantic PMI (Planar Monolithics) is a Low Noise Amplifier (LNA) that operates from 10 MHz to 20 GHz. It provides more than 26 dB of gain with a noise figure of less than 3.3 dB and has an output P1dB of +14 dBm. This LNA has a reverse isolation of more than 35 dB and a VSWR of less than 2.4:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| RF-over-Fiber Link from 45 to 3000 MHz with up to 60 Km Range | |
RF Over Fiber Module
from Rover Instruments
|
| The ROF4 from Rover Instruments is an RF-over-Fiber Link that operates from 45 to 3000 MHz. It provides an RF gain of 30 dB and has a noise figure of less than 10 dB in Tx and Rx modes. In the optical Tx mode, it is equipped with a DFB single mode laser and supports wavelengths of 1310/1550 nm and a transmission distance of up to 60 Km (1310 nm). |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5 GHz High-Integrated Wi-Fi 6 + Bluetooth LE 5.2 Combo Module | |
RF Module
from NXP Semiconductors
|
| The IW611 from NXP Semiconductors is a 2.4/5 GHz Wi-Fi 6 and Bluetooth Low Energy 5.2 Module. For Wi-Fi operation, it has channel bandwidths of up to 80 MHz and includes support for uplink/downlink MU-MIMO and OFDMA. This module also includes features such as Target Wake Time (TWT), dual carrier modulation, extended range, and 802.11az accurate ranging. |
| |
Download Datasheet
Product Details | |
|
|
|
| Modular Anechoic Chamber for Shielding up to 40 GHz | |
Anechoic Chamber
from Antenna Systems Solutions S.L
|
| The ASYSHIELD from Antenna Systems Solutions is an Anechoic Chamber. It provides an average shielding effectiveness of up to 60 dB before the installation of the absorbers (can be extended up to 80 dB). The shielded enclosure consists of shielding panels made of two sheets of galvanized steel and the enclosure has excellent resistance to corrosion. |
| |
Download Datasheet
Product Details | |
|
|
|
| 50 W, Fixed Attenuators from DC to 18 GHz | |
Fixed Attenuator
from JFW Industries
|
| The 50HFFA-XXX-50/18 from JFW Industries are Fixed Attenuators that operate from DC to 18 GHz. They are available in attenuation values from 1 to 40 dB (in 1 dB increments). These attenuators can handle an average input power of 50 W, a peak input power of 1 kW, and a reverse power of 20 W. They are available in modules that measure 4.13 (L) x 2.52 (Dia.) inches. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount Noise Source from 200 kHz to 5 GHz | |
Noise Source
from Noisecom
|
| The NC520 from Noisecom is a Noise Source that operates from 200 kHz to 5 GHz. It produces white gaussian noise with an output power of more than 25 dB ENR (-143 dBm/Hz) and has a crest factor of 5:1. This noise source contains all bias circuits and requires no external components. It has extremely flat output power versus frequency characteristic which is insensitive to temperature and voltage variations. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Noise, High-Speed DAC Interface IC from 3 to 16 GHz | |
RF Amplifier
from mmTron Inc
|
| The TMC160 from mmTron is a DAC Interface IC that operates from 3 to 16 GHz. It amplifies and converts the differential output of a high-speed DAC to a clean, low-noise, single-ended signal to drive the RF chain of a transmitter. This IC integrates anti-alias lowpass filtering, low noise amplification, and a balun that converts the differential DAC output to a single-ended 50-ohm output compatible with traditional RF signal chains. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 100 W, Qi 1.2.4/1.3 Compliant Inductive Wireless Power Receiver | |
Wireless Charging Receiver
from STMicroelectronics
|
| The STWLC99JR from STMicroelectronics is an Inductive Wireless Power Receiver that can handle up to 100 W of power. It can also operate as a wireless transmitter (TX mode) delivering an output power of up to 25 W (coil-dependent). This wireless power receiver is Qi 1.2.4 and 1.3 compliant and has an integrated low RDS-ON synchronous rectifier with over 98% efficiency. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 25 W, 4:1 RF Transformer from 30 to 1000 MHz | |
Balun
from Innovative Power Products
|
| The IPP-5027 from Innovative Power Products is a Single-Ended 4:1 Impedance Transformer that operates from 30 to 1000 MHz. It can handle an input power of up to 25 W, has an insertion loss of less than 0.75 dB, and a main line VSWR of 1.45:1. This transformer has an impedance of 50 ohms at port 1 and 12.5-ohms at port 2. |
| |
Download Datasheet
Product Details | |
|
