| New Cable & Connector Products . |
|
|
| 40 GHz Multiport Contact for Military Avionics and EW Applications | |
RF Connector
from Times Microwave Systems
|
| The M8M™ Multiport Contact from Times Microwaves System that operates up to 40 GHz. It is designed for advanced military avionics and electronic warfare (EW) applications that require extremely restricted space constraints and rising operating frequencies. This contact has a unique construction and is ideal for high-vibration and harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6 GHz Flame-Retardant Flexible Low-Loss RF Cable | |
RF Cable
from HUBER+SUHNER
|
| The SPUMA_400-RS-FR from HUBER+SUHNER is a Flexible RF Cable that operates up to 6 GHz. It has been developed using rotary swaging technology and provides easy handling and installation due to its flexibility. This cable is an alternative to LMR coaxial cables (from Times Microwave Systems) and uses halogen-free materials with low loss and VSWR optimization. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1.85 mm Field Replaceable RF Connectors from DC to 65 GHz | |
RF Connector
from San-tron
|
| The 5306 Series from San-tron are 1.85 mm Field Replaceable RF Connectors that operate from DC to 65 GHz. They can withstand a dielectric voltage of 500 VRMS and have a VSWR of less than 1.20:1. These connectors are available in 3/8 and 1/2-inch square, 2-hole 0.550” flange and 2-hole 0.625” flange configurations for 0.009” launch pin diameters. Other mounting options are available upon request. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Amplitude & Phase Stable Microwave/RF Cable Assemblies to 67 GHz | |
RF Cable Assembly
from Maury Microwave
|
| The Stability Plus™ from Maury Microwave are Phase-Stable Microwave/RF Cable Assemblies that operate up to 67 GHz. They offer excellent measurement repeatability even while flexing the cables and are lightweight which makes them suitable for daily use with VNA's, test instruments, bench-top testing and ATE systems. They follow the proposed IEEE high-frequency connector / adapter color convention to avoid and eliminate equipment damage due to improper mating of incompatible interconnects. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Maury Microwave | | |
|
|
| N-Type Double-Row Test Cable Assembly from DC to 40 GHz | |
RF Cable Assembly
from Samtec
|
| The BE40A from Samtec is a Double-Row RF Test Cable Assembly that operates from DC to 40 GHz. It supports up to 16 positions (per row) with stripline or microstrip transmission type options. This flexible cable assembly is available in lengths up to 1000 mm with a minimum bend radius of 3.175 mm and can withstand 1000 flex cycles. |
| |
Download Datasheet
Product Details | |
|
|
|
| MIL-STD-348B Standard 2.92 mm RF Connectors from DC to 40 GHz | |
RF Connector
from Hirose Electronic
|
| The 2.92 mm Series RF Connectors from Hirose Electronic operate from DC to 40 GHz. They conform to MIL-STD- 348B standards and provide excellent high-frequency performance with consistent mounting quality. The board receptacles of these connectors are screw-mounted instead of being soldered to the board and can be reused which reduces the mounting complexity. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.92 mm (F) Edge Launch PCB Connector from DC to 40 GHz | |
RF Connector
from P1dB Inc.
|
| The P1CO-29FEL-05/09-LP from P1dB RF & MW Components is a 2.92 mm (female) End Launch PCB Connector that operates from DC to 40 GHz. This 50-ohm low-profile connector has a straight orientation and offers the best electrical match when mated with Microstrip printed circuit boards. It is field replaceable (non-solder attachment to PCB) and measures 0.745 x 0.374 x 0.5 inches with a center contact pin diameter of 0.005 inches. |
| |
Download Datasheet
Product Details | |
|
|
|
| IP67/IP68-Rated Waterproof RF and Microwave Connectors | |
RF Connector
from IntelliConnect
|
| The Pisces Series are waterproof connectors from IntelliConnect that have been developed for use in mil-aerospace, SCADA, marine, medical, transportation, and oil and gas applications. These IP67 and IP68 rated connectors are sealed internally and are therefore waterproof when unmated. They are available in various connector formats that include: ABMS (Rugged MCX), N-Type, Push-Pull, TNC, and SMA. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 50 GHz mmWave Coaxial Cable Assemblies for VNA Connections | |
RF Cable Assembly
from Junkosha
|
| The 8 Series from Junkosha are mmWave Coaxial Cable Assemblies that operate up to 50 GHz. These VNA test assemblies exhibit phase stability of ± 4.5° and amplitude stability of ± 0.08 dB at 50 GHz in flexure alongside strong phase stability with temperature variations. They have an insertion loss of less than 6.2 dB and a VSWR of 1.43:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12 GHz Micro-Coax RF Connector | |
RF Connector
from I-PEX
|
| The MHF® 4L LK from I-PEX is a Coaxial RF Connector that operates up to 12 GHz. It is a Micro-coax connector that clicks into place seamlessly and is designed to keep signals connected through constant shock and vibration. This connector utilizes I-PEX’s patented locking mechanism for improved connection reliability and security and works with MHF 4/4L receptacles. |
| |
Download Datasheet
Product Details | |
|
|
|
| 75-Ohm Straight BNC-Jack to BNC-Plug Adapter for 4K UHD Video Applications | |
In Series RF Adapter
from Amphenol RF
|
| The 112532-12G from Amphenol RF is a BNC-Jack to BNC-Plug Adapter. This 75-ohm in-series adapter has a push-on straight bulkhead design. It is designed for 12 Gbps-SDI video applications and is optimized for 4K Ultra HD broadcast video, providing fully intact signal transmission on a single channel. The adapter has a Brass body with a Nickel finish and Phosphor Bronze contact with a Gold finish. |
| |
Download Datasheet
Product Details | |
|
