| Featured Products this Week . |
|
|
| High-Performance Remote Wideband Recorder & Receiver from 9 kHz to 18 GHz | |
RF Spectrum Recording and Playback System
from CRFS
|
| The RFeye SenS Remote 100-18 from CRFS is a Remote Spectrum Receiver with I/Q Recording that operates from 9 kHz to 18 GHz. The system uses a powerful COTS processor for secure rack-mounted recording and can be positioned in fixed, unmanned locations such as on a mast or tower. It is ideal for use as a true detect-to-analysis EW/SIGINT solution for use cases ranging from border security to EMCON training. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Loss Passive RF Crossover from DC to 2.7 GHz | |
RF Crossover
from Qorvo
|
| The TQQ7399 from Qorvo is a Passive RF Crossover that operates from DC to 2700 MHz. It can handle a CW input power of up to +20 dBm and has an insertion loss of 0.15 dB. This RoHS-compliant crossover is fully-matched to 50 ohms on all the ports and exhibits low loss. It is available in a surface-mount package that measures 3.00 x 3.00 x 1.02 mm and is ideal for RF bypass paths, microwave radio, test and measurement, scientific measurements, and general-purpose wireless applications. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| ColorConnect Precision In-Series Adapters | |
In Series RF Adapter
from Maury Microwave
|
| ColorConnect Precision Adapters from Maury Microwave have been designed for lab and field use where quality, performance, ease-of-identification and ease-of-use are critical. They are the first commercially available adapters to follow the proposed IEEE high-frequency connector/adapter color convention. |
| |
Download Datasheet
Product Details | |
|
|
|
| mm-Wave Directional Coupler from 6 to 40 GHz | |
Directional Coupler
from MECA
|
| The 765-20-23.000 from MECA is a 5G-ready mm-wave Directional Coupler that operates from 6 to 40 GHz (Covering the C to V Band). It has a coupling value of 20 dB and can handle up to 20 watts of average power. The coupler has an insertion loss of less than 1.3 dB and directivity of more than 12 dB. It is available in a module with 2.92mm (F) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| E-Band Waveguide Low Noise Amplifier from 71 to 86 GHz | |
RF Amplifier
from Mini Circuits
|
| The WVA-71863LNX+ from Mini-Circuits is a Low Noise Amplifier that operates from 71 to 86 GHz. It provides 39 dB of gain with a noise figure of less than 5 dB and has a saturated output power of 18.5 dBm. This amplifier incorporates several DC-protection features such as over-voltage, reverse voltage, and in-rush current protection to protect from damage in case of unexpected spikes in voltage during operation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1.5 kW Solid-State Power Amplifier from 10 kHz to 250 MHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2080E-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 10 kHz to 250 MHz. It delivers a saturated output power of 1500 W with a power gain of more than 62 dB. This Class A/AB linear amplifier has built-in protection circuits and provides extensive monitoring parameters for all modulations standards, forward/reflected power (in Watts & dBm), VSWR, voltage, current, and temperature for optimum reliability & ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W RF Attenuator from DC to 400 MHz | |
Fixed Attenuator
from Inmet by Spectrum Control
|
| The Model TPA100 from Inmet by Spectrum Control is a Thick Film RF Attenuator that operates from DC to 400 MHz. It is available in 1, 2, 3, 4, 6, 10, and 20 dB attenuation configurations and has an accuracy of ±0.5 dB. The attenuator can handle an input power of up to 100 W and is designed to uniformly reduce the power of the RF signal while generating only a small reflection, even under maximum power conditions. |
| |
Download Datasheet
Product Details | |
|
|
|
| 60 GHz RADAR Sensor for 1D to 3D Sensing | |
Radar Sensor
from Socionext
|
| The SC1240AR3 from Socionext is a RADAR Sensor that operates from 57.1 to 63.9 GHz. It has a built-in range-finding and 3D angle-calculating signal processing circuit. The sensor is suited for 1D to 3D sensing and has 1 Tx and 2 x 2 Rx antennas which detect azimuth/elevation angle, velocity, and distance. |
| |
Download Datasheet
Product Details | |
|
|
|
| High-Accuracy USB Power Meter from 4 kHz to 6 GHz | |
RF Power Meter
from Raditeq B.V.
|
| The RadiPower® RPR4006R from Raditeq is a USB Power Meter that operates from 4 kHz to 6 GHz. It combines excellent RMS measurement accuracy over a large dynamic range with high measurement speed. This power meter has a dynamic range of up to 80 dB, a resolution of 0.01 dB and a measurement speed of 5 MS/s (supports dBm and Watt measuring units). |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Quad-Ridged Feed Antenna from 0.5 to 1.5 GHz | |
Feed Horn
from NSI-MI Technologies
|
| The ANT-QRF-0.5-1.5 from NSI-MI Technologies is a Quad-Ridged Feed Antenna that operates from 0.5 to 1.5 GHz. This dual-linear polarized antenna provides a gain of 22.4 dBi, port-to-port isolation of 28 dB and has a VSWR of 2.1:1. It has an aluminium housing that measures 45.9 x 38.2 x 38.2 cm and has N-type (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 GHz FBAR Integrated Front End Module for Wi-Fi 7 Applications | |
Front End Module
from Broadcom
|
| The AFEM-W750 from Broadcom is a 5 GHz Wi-Fi 7 FBAR Integrated Front End Module (FiFEM). The FEM consists of a power amplifier (PA), a high-gain low-noise amplifier (LNA), a transmit/receive (T/R) switch, and a 5 GHz FBAR Band-Pass filter (UNII-1 to UNII-3) for coexistence with 6 GHz Wi-Fi. It provides an output power of +25 dBm and a 6 GHz coexistence rejection of 50 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Bluetooth 5.1 Low Energy Module with Improved Interference Mitigation | |
RF Module
from Panasonic Industry Europe
|
| The PAN1782 from Panasonic is a Bluetooth v5.1 Low Energy (LE) Module. It is based on the Nordic nRF52833 single-chip controller which features a 64 MHz ARM Cortex-M4, 128-bit AES/ECB/CCM/AAR co-processor, embedded 512 kB flash memory and 128 kB internal RAM. The module supports angle of arrival (AOA) & angle of departure (AOD) direction-finding Bluetooth features. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 1x8 Ganged SMT PCB Connectors from DC to 50 GHz | |
RF Connector
from HUBER+SUHNER
|
| The 1x8A_81_MXP Series from HUBER+SUHNER are 1x8 Ganged SMT PCB Connectors that operate from DC to 50 GHz. They have a return loss of 20 dB (from DC to 22.5 GHz) and can withstand 500 mating cycles. These connectors have a Copper Beryllium center contact, BZ4 outer contact and brass body. They have an operating temperature range of -55°C to +85°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Top-Side Cooled RF Power Amplifiers for 5G Infrastructure from 3300 to 3670 MHz | |
RF Amplifier
from NXP Semiconductors
|
| The A5M34TG140-TC from NXP Semiconductors is a Doherty Power Amplifier Module that operates from 3300 to 3670 MHz. It is based on NXP's new top-side cooling technology that helps radio designers create thinner, lighter 5G radio units while reducing design and manufacturing complexities. This 8 W module series is designed for massive MIMO radios covering 3.3 GHz to 3.8 GHz — typically 32T32R (200 W) or 64T64R (320 W) radios. |
| |
Download Datasheet
Product Details | |
|
|
|
| Hermetically-Sealed InGaP VCO MMIC from 13.32 to 15.20 GHz | |
Voltage Controlled Oscillator
from Teledyne e2v HiRel Electronics
|
| The TDVCO015 from Teledyne e2V Hirel Electronics is an InGaP Voltage Controlled Oscillator (VCO) MMIC with a frequency range of 13.32 to 15.20 GHz. It provides an output power of +10 dBm with a phase noise of -115 dBc/Hz. This Heterojunction Bipolar Transistor (HBT) VCO has a monolithic structure and integrates resonators, negative resistance devices, and varactor diodes. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Hermetically-Sealed LVPECL Crystal Oscillator from 50 to 250 MHz | |
General Crystal Oscillator
from IQD Frequency Products
|
| The IQXO-439-25 from IQD Frequency Products is a Crystal Oscillator that operates from 50 to 250 MHz. It provides an LVPECL output with a frequency stability of ±100 ppm and a phase jitter of less than 0.5 ps (RMS). This oscillator has a start-up time of less than 10 ms and a rise/fall time of 0.6 ns. It requires a DC supply of 2.5 V and consumes less than 57 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| 12x12 MIMO Sector Antenna from 2.2 - 2.5 / 4.4 - 4.5 GHz | |
Antenna
from Southwest Antennas
|
| The 1009-076 from Southwest Antennas is a 12x12 Sector Antenna that operates from 2200 – 2500 MHz and 4400 – 4500 MHz. It has a 45° slant left and slant right polarization design which provides superior transmit and receive polarization diversity. This antenna has a horizontal beamwidth of 360° and a vertical beamwidth from 5 to 11°. |
| |
Download Datasheet
Product Details | |
|
