| New RF and Microwave Products this Week . |
|
|
| E-Band Waveguide Low Noise Amplifier from 71 to 86 GHz | |
RF Amplifier
from Mini Circuits
|
| The WVA-71863LNX+ from Mini-Circuits is a Low Noise Amplifier that operates from 71 to 86 GHz. It provides 39 dB of gain with a noise figure of less than 5 dB and has a saturated output power of 18.5 dBm. This amplifier incorporates several DC-protection features such as over-voltage, reverse voltage, and in-rush current protection to protect from damage in case of unexpected spikes in voltage during operation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Single Layer Binary Capacitors with Multiple Dielectric Options | |
RF Capacitor
from Quantic Eulex
|
| The XD Series from Quantic Eulex are a type of single layer binary capacitors. Quantic Eulex has developed and patented a ceramic capacitor with a similar form factor as a traditional single-layer capacitor but with a 10-fold increase in capacitance. The patented structure allows for a reduced thickness between the electrodes of the device meaning increased capacitance values for a given dielectric and component size. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 2800 W GaN Pulsed Power Amplifier from 2.7 to 3.1 GHz | |
RF Amplifier
from RFHIC
|
| The RRP27312k5-30 from RFHIC is a GaN Pulse Power Amplifier that operates from 2.7 to 3.1 GHz. It provides an output pulse power of 2800 W with a gain of 30 dB (±0.5 dB, max) and has a high efficiency of 40%. This HEMT amplifier has a duty cycle of 5%, a pulse width of from 1 to 100 µs and a rise/fall time of less than 100 ns. It has been designed for radar applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 750 W Solid State Amplifier System from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 750S1G6C from AR RF/Microwave Instrumentation is a Solid-State Amplifier System that operates from 1 to 6 GHz. This class A amplifier delivers a saturated output power of more than 750 W from 1 to 4.2 GHz and 500 W from 4.2 to 6 GHz. It is immune to input overdrive above 0 dBm (up to 13 dBm), power supply faults, over-temperature, and has protection against other failure conditions as well. This amplifier is ideal for test and measurement applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Digi-Key | | TE Connectivity's Trigger Antennas | | TE's innovative Trigger family of multiport/multiband antennas for transportation, aftermarket fleet, public safety, and IoT applications, incorporation of both vertically/horizontally-polarized cellular radiating elements has been shown to provide improved signal-received power. Click here to learn more. | | | |
|
|
| 4 kW Class AB Pulsed Solid-State Power Amplifier from 1 to 2.5 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2074P-4KW from Exodus Advanced Communications is a Solid-State Power Amplifier (SSPA) that operates from 1.0 to 2.5 GHz. It delivers a pulsed output power of more than 4 kW with a power gain of 66 dB. This SSPA is based on the Class AB linear advanced technology design that delivers high efficiency with unprecedented reliability and ruggedness. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered Programmable SP4T Switch from 100 to 8000 MHz | |
RF Switch
from Vaunix
|
| The LSW-802P4T from Vaunix is a USB Powered Programmable SP4T Solid-State Absorptive Switch that operates from 100 to 8000 MHz. It is easily programmable for fast switching or sequenced switching directly from a Windows Graphical User Interface (GUI) or the WebUI. The switch has an insertion loss of less than 5.25 dB and provides an isolation of 65 dB. It can handle an input power of up to 35 dBm and has a VSWR of less than 1.5:1. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Phase and Amplitude Stable Flexible Coaxial Cables from DC to 50 GHz | |
RF Cable Assembly
from HASCO Components
|
| The Littlebend™ HLB098 Series from HASCO Components are Flexible Coaxial Cables that operates from DC to 50 GHz. They are extremely flexible and are designed for demanding microwave interconnect applications and system designs requiring dense packaging. These cables can replace Right Angle connectors with minimal performance degradation due to its tight bend radius. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ultra Low Phase Noise OCXOs from 80 to 120 MHz | |
OCXO
from NEL Frequency Controls
|
| The O-CS8 Series from NEL Frequency Controls are Oven Controlled Crystal Oscillators (OCXO) that operate from 80 to 120 MHz. They provide a sine wave output with an amplitude of +15 dBm and a SSB phase noise of -178 dBc/Hz @ 100 kHz offset. These oscillators are designed using an SC-cut crystal and have an operating temperature range from 0° to 70°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8-Bit Digital Phase Shifter from 0.03 to 2.0 GHz | |
Digital Phase Shifter
from Quantic PMI (Planar Monolithics)
|
| The PS-30M2G-8B-SFF from Quantic PMI is a Digital Phase Shifter that operates from 0.03 to 2 GHz. It has a phase shift range of 360° with 512 discrete values of phase providing an LSB of 1.40625°. This phase shifter has an amplitude error of ±1.0 dB and a phase shift error of ±10°. It has 8-bit TTL control bits with a switching speed of less than 500 ns and has an insertion loss of less than 13 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
| 10 MHz to 26 GHz Real-Time Phase Noise Analyzer | |
Phase Noise Analyzer
from Holzworth Instrumentation
|
| The HA7062D from Holzworth is a real time phase noise analysis system that operates from 10 MHz to 26 GHz (optional to 40 GHz). It provides measurement offsets from 0.1 Hz to 100 MHz. The analyzer is available in a fully shielded, fan-less 1U chassis that completely eliminates ground loops and troublesome microphonics for uncompromised performance and repeatability. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Sub-Octave Switch Filter Bank from 2 MHz to 8 GHz | |
Switched Filter Bank
from ATEK MIDAS
|
| The ATEK950P6 from ATEK MIDAS is a Sub-Octave Switch Filter Bank that operates from 2 to 8000 MHz. It consists of an SP8T switch followed by 7 fixed frequency bandpass filters and then another SP8T switch. This switch filter bank a switching speed of 150 ns and an insertion loss of less than 6 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flexible Microwave PXI Switching Module up to 26.5 GHz | |
PXI RF Switch
from Pickering Interfaces
|
| The 40-890-004 from Pickering Interfaces is a Flexible PXI Switching Module that operates up to 26.5 GHz. It consists of two terminated SP6T switches and a single SPDT relay, and can be externally cabled to create a SP12T multiplexer for frequency ranges where a dedicated 12:1 multiplexer is not available. This PXI switching module has an insertion loss of 0.6 dB and provides an isolation of 80 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Microwave Upconverter + Downconverter from 37 to 50 GHz for mmWave 5G Radios | |
RF Up-down Converter
from Analog Devices
|
| The ADMV1139A from Analog Devices is a Silicon-on-Insulator (SOI), Microwave, Upconverter, and Downconverter that operates from 37 to 50 GHz. It integrates an upconverter (transmitter), a downconverter (receiver), and a LO chain with a 4x multiplier in one chip. This up/down converter has an on-chip RF switch to combine transmit and receive RF ports together for time division duplex (TDD) applications. It is ideal for mmWave 5G radios, radar, electronic warfare systems, instrumentation, and point-to-point microwave radio applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G-NR Low-Noise Diversity Receive Module from 3.3 to 4.2 GHz | |
Front End Module
from Skyworks Solutions
|
| The SKY53761-11 from Skyworks is a 5G-NR Diversity Receive Module that operates in the n77/78 bands from 3.3 to 4.2 GHz. It utilizes the latest advanced SOI process technologies to achieve exceptional high-bandwidth, low-noise figure (NF) LNA performance. This module has integrated multi-mode, variable gain LNA that works with all 5G chipsets. |
| |
Download Datasheet
Product Details | |
|
|
|
| Active GPS/BeiDou/GLONASS Timing Antenna from 1559 to 1607 MHz | |
GPS/GNSS Antenna
from PolyPhaser
|
| The PPANGPS1016 from PolyPhaser is an Active GPS/GNSS Timing Antenna that operates from 1559 to 1607 MHz. This right-hand circular polarized (RHCP) antenna filters and amplifies GNSS L1, GLONASS G1, and BeiDou B1 global positioning signals received from satellite constellations. It has an integrated low-noise amplifier (LNA) that provides a gain of 31 dBi with a noise figure of 1.5 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 325 W Antenna-Mount Power Amplifiers from 27 to 31 GHz | |
SATCOM Amplifier System
from Comtech Xicom Technology
|
| The XTD-750KaL from ComTech are Antenna-Mount High Power Amplifiers that operate from 27 to 31 GHz. They deliver a CW output power of 325 W (~55.1 dBm) with a small signal gain of more than 70 dB. These amplifiers have spurious levels and harmonics of -60 dBc. They are designed to offer compactness, low-cost installation, and a long life. |
| |
Download Datasheet
Product Details | |
|
|
|
| Battery-Powered Class A/B Bidirectional Amplifier from 768 to 869 MHz | |
RF Amplifier
from Westell Technologies
|
| The CS40-734834-CAN from Westell Technologies is a Bidirectional Amplifier (BDA) that operates from 798 – 824 MHz (uplink) and 768-776 MHz/851-869 MHz (downlink). It delivers an output power of 2.5 W (~34 dBm) with a gain of 75 dB and has a noise figure of less than 7 dB. This amplifier represents the next revolution in public safety DAS designs, offering the most flexible platform available on the market. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-Beam Lens Antenna for Base-Station Applications from 698 MHz to 4.2 GHz | |
Base Station Antenna
from MatSing
|
| The MS-MBA-4.4.2-F2-H2-L2 from Matsing is a Multi-Beam Tri-Band Base-Station Antenna that operates from 698-960 MHz, 1695-2690 MHz and 3.3-4.2 GHz. This antenna has a patented spherical lens design that provides up to 19 dBi of gain and has a horizontal coverage of 120°. It is ±45° dual slant polarized and has 2 beams for the 698-960 MHz band and 4 beams each for 1695-2690 MHz and 3.3 – 4.2 GHz bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| LTE/CBRS Wireless Radio from 3.4 to 3.8 GHz | |
Microwave Backhaul Radio Links
from BLiNQ Networks
|
| The FW-300i from Blinq Networks is an Integrated Wireless Solution that operates in LTE bands 42/43 from 3.40-3.80 GHz and LTE band 48 (CBRS) from 3.55-3.70 GHz. It is a tri-sector and tri-carrier Long-Term Evolution (LTE) Evolved Node B (eNB) that is easy to set up, fits anywhere, and provides incredible network capacity. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
