| New RF and Microwave Products this Week . |
|
|
| 63 W GaN Power Amplifier from 3.4 to 3.8 GHz for 5G mMIMO Applications | |
RF Amplifier
from Mitsubishi Electric US, Inc.
|
| The MGFS48G38MB from Mitsubishi Electric is a GaN Power Amplifier that operates from 3.4 to 3.8 GHz. It delivers a saturated output power of more than 63 W with a gain of over 28 dB and a power-added efficiency (PAE) of 43%. This power amplifier has an epitaxial growth layer structure that offers high efficiency and low distortion characteristics even when used in 5G environments. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount Module with Integrated Switch and LNA from 1.4 to 4.2 GHz | |
Front End Module
from MACOM
|
| The MAMF-011150 from MACOM is a High-Power Switch-LNA Front End Module that operates from 1.4 to 4.2 GHz. It has an integrated high-power PIN-diode SPDT switch, 2-stage low noise amplifier (LNA), DC converter, power management chip, and a PIN driver on a single integrated circuit (IC). The integrated LNA provides a gain of 37 dB with a noise figure of 1.1 dB and has a P1dB of 19 dBm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Real-Time Spectrum Analyzer with GNSS Capabilities | |
RF Spectrum Analyzer
from ThinkRF
|
| The R5750 from thinkRF is a Real-Time Spectrum Analyzer with built-in GPS for mobile wireless situational awareness applications. With built-in GPS capabilities, this Real-Time Spectrum Analyzer enables engineers in the field to conduct in-depth analysis of complex waveforms while knowing the location and time of each measurement. |
| |
Download Datasheet
Product Details | |
|
|
|
| Economy USB Based Tracking Generator from 100 kHz to 12.4 GHz | |
Signal Generator
from Signal Hound
|
| The USB-TG124A from Signal Hound is a USB-based tracking generator that operates from 100 kHz to 12.4 GHz. It works with the USB-SA124A spectrum analyzers to measure filters, attenuators, amplifiers and other components to carry out scalar network analyzer measurements. The tracking generator has an amplitude range from -30 to -12 dBm and an absolute accuracy of 2 dB with a scanning rate up to 700 points/sec. |
| |
Download Datasheet
Product Details | |
|
|
|
| Compact USB VNA from 9 kHz to 6.5 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5065 is a compact 2 port VNA that operates up to 6.5 GHz. It can be controlled using a software application which runs on a Windows PC, laptop, or tablet, connecting to the measurement hardware via USB interface. The application can be installed on multiple computers, making it easy to share the use of the analyzer measurement module. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Copper Mountain Technologies | | | |
|
|
| 2 kW CW/Pulsed LDMOS Power Transistor from 1 to 400 MHz | |
RF Transistor
from Ampleon
|
| The ART2K0TFES from Ampleon is a LDMOS Power Transistor that operates from 1 to 400 MHz. It delivers a CW/pulsed output power of 2 kW with a power gain from 27 to 29 dB and has a drain efficiency of up to 73%. This transistor is based on Advanced Rugged Technology (ART) and can support a wide range of ISM, broadcast, and communication applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 20 W, WR-28 Waveguide Junction Circulator from 26.5 to 40 GHz | |
Waveguide Circulator
from ERAVANT
|
| The SNF-28-C5 from Eravant is a Waveguide Junction Circulator that operates from 26.5 to 40 GHz. This Ka-Band isolator can handle a CW forward power of up to 20 W, provides an isolation of 15 dB, and has an insertion loss of less than 0.7 dB. It offers a much shorter insertion length for system integration compared to a Faraday isolator. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Pass Filter Die with Passband from DC to 10 GHz | |
Low Pass RF Filter
from AmpliTech
|
| The AGM-008 from AmpliTech is a Low Pass Filter with a passband from DC to 10 GHz. It has a passband insertion loss of less than 1.5 dB, provides a rejection of 20 dB at 12.71 GHz and 40 dB at 13.85 GHz. This filter is available as a bare die that measures 1.00 x 0.750 x 0.100 mm and is ideal for communication systems, point-to-point radios, fiber optics, test equipment, wideband military and space applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| Electromagnetic Analysis Tool for Predicting Radar Cross Section | |
Software
from Remcom
|
| XGtd from Remcom is a Ray-Based EM Simulation Software for assessing the effects of a vehicle or vessel on antenna radiation, predicting coupling between antennas and predicting radar cross section (RCS). It incorporates techniques including Geometric Optics (GO), the Uniform Theory of Diffraction (UTD), Physical Optics (PO), and the Method of Equivalent Currents (MEC). |
| |
Download Datasheet
Product Details | |
|
|
|
| Temperature Variable Chip Attenuators from DC to 20 GHz | |
RF Variable Attenuator
from Smiths Interconnect
|
| The WTVA Series from Smiths Interconnect are Temperature Variable Chip Attenuators that operate from DC to 20 GHz. They are available in attenuation values from 2 to 7 dB with 1 dB increments and an accuracy of ± 0.5 dB. The attenuators have a Temperature Coefficient of Attenuation (TCA) from -0.003 to -0.007 dB/dB/°C. They can handle an average input power of 200 mW and have a VSWR of less than 1.70:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cost-effective, High-performance, Space-Qualified Master Crystal Oscillator | |
OCXO
from Safran Electronics & Defense
|
| The LNMO from Safran is a Space Qualified Crystal Oscillator with a frequency of 10 MHz (frequencies from 5 to 40 MHz available upon request). It produces an output signal of 7 dBm with an SSB phase noise of -140 dBc/Hz @ 1 kHz offset and frequency stability of ± 1x10-9 over a wide temperature range. The oscillator has a standard warm-up time of 10 minutes and a fast warm-up time of 5 minutes. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Copper Mountain Technologies | | |
|
|
| 100 MHz Sinewave TCXO for Timing Applications | |
TCXO
from Dynamic Engineers
|
| The TCXO1490BM-STR3-100MHz-A from Dynamic Engineers is a Temperature-Compensated Crystal Oscillator (TCXO) that operates at 100 MHz. It provides a sinewave output with an output power of 10 dBm and an SSB phase noise of -155 dBc/Hz (at 10 kHz offset). This TCXO has an operating temperature range of -40°C to +85°C and a frequency stability (vs operating temperature range) of ±0.28 ppm. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 x 8 Non-Blocking Switch Matrix from 350 MHz to 6 GHz | |
Switch Matrix
from JFW Industries
|
| The 50MS-426 from JFW Industries is an 8 x 8 Non-Blocking Solid-State Switch Matrix that operates from 350 to 6000 MHz. It can handle an input power of +30 dBm, has a switching speed of 10 ms, and has an insertion loss of 18.8 dB. This switch matrix provides an output-to-output isolation of 75 dB (set to different inputs), input-to-output isolation of 95 dB and input-to-input isolation of 75 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| 90° Hybrid Coupler from 150 to 520 MHz | |
90 Degree Hybrid Coupler
from MECA
|
| The 705S-0.335 from MECA is a 90° Hybrid Coupler that operates from 150 to 520 MHz. It provides more than 25 dB of isolation and has a frequency sensitivity of ±1.20 dB. This hybrid coupler can handle an average input power of 50 W and a peak input power of 3000 W. It is available in a module with passivated, stainless steel SMA (female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
| Waveguide VNA Calibration Kits from 2.6 to 50 GHz | |
VNA Calibration Kit
from Maury Microwave
|
| The Waveguide VNA Calibration Kits from Maury Microwave can be used at frequencies up to 50 GHz. Calibration of VNAs are extremely important to accurately determine one-port and two-port network characteristics of RF and microwave devices. Maury Microwave has developed a comprehensive line of waveguide VNA calibration kits that are available with WR284, WR229, WR 187, WR159, WR137, WR112, WR90, WR75, WR62, WR51, WR42, WR34, WR28, and WR22 waveguides. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Wi-Fi 6E + Bluetooth® 5.4 Module for Industrial IoT Applications | |
RF Module
from Laird Connectivity
|
| The Sona™ IF573 from Laird Connectivity is a Wi-Fi 6E + Bluetooth® 5.4 Combo Module that is optimized for low-power mobile devices. It is based on Infineon’s AIROC™ CYW55573 chipset and supports IEEE 802.11ax tri-band (2.4/5/6 GHz) 2x2 MIMO with PHY data rates up to 1.2 Gbps (for 5/6 GHz). This module is pre-calibrated and integrates the complete transmit/receive RF paths including bandpass filter, diplexer, switches, reference crystal oscillator, and power management units (PMU). |
| |
Download Datasheet
Product Details | |
|
|
|
| Sub-6 GHz 5G-NR Module for Industrial IoT and eMBB Applications | |
Cellular Module
from Quectel
|
| The RM521F-GL from Quectel is a 5G NR Sub-6 GHz Module that has been optimized for IoT/eMBB applications. It is based on the 3GPP Release 16 technology, supporting both 5G NSA and SA modes. This module is industrial-grade and is ideal for industrial and commercial applications. It covers nearly all the mainstream carriers worldwide for both 5G and LTE-A. |
| |
Download Datasheet
Product Details | |
|
|
|
| 3GPP Rel-17 5G-NR Chipset from 600 to 7125 MHz for Global Deployment | |
Cellular Module
from Sequans Communications
|
| The Taurus from Sequans is a 5G-NR Chipset that operates from 600 to 7125 MHz. It is compliant with 3GPP Release-17 and supports both standalone and non-standalone 5G, along with carrier aggregation for worldwide deployment. This chipset delivers a 5G broadband speed of 2 Gbps and is designed for broadband IoT applications combining a highly optimized sub-6 GHz (FR1) modem with a powerful system-on-chip (SoC) with dual-core APU for smart edge applications and integrated routers. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Cost, Beam-steering RF Module from 57 to 71 GHz for FWA Applications | |
RF Module
from Sivers Semiconductors
|
| The BFM06017 from Sivers Semiconductors is a Low-Cost RF Module that operates from 57 to 71 GHz. It supports 1D beam-steering (±45° steering in azimuth) and is optimized for high-performance FWA applications and for unlicensed 5G spectrum (802.11ad and 5G NR-U, TDD). This module has a 16+16 Tx/Rx array and enables up to 256 QAM SC with an integrated synthesizer to support a throughput of 10 Gbit/s. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 325 W Antenna-Mount Power Amplifiers from 27 to 31 GHz | |
SATCOM Amplifier System
from Comtech Xicom Technology
|
| The XTD-750KaL from ComTech are Antenna-Mount High Power Amplifiers that operate from 27 to 31 GHz. They deliver a CW output power of 325 W (~55.1 dBm) with a small signal gain of more than 70 dB. These amplifiers have spurious levels and harmonics of -60 dBc. They are designed to offer compactness, low-cost installation, and a long life. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2.4 GHz Surface-Mount Ceramic Antenna | |
Antenna
from Antenova
|
| The Abdita (SRCW090) from Antenova is a 2.4 GHz Surface-Mount Ceramic Antenna. This linearly polarized antenna provides a peak gain of 2.8 dBi with an efficiency of up to 60%. It is simple to integrate into a design and operates on various ground plane sizes. The antenna is resistant to de-tuning effects and can work well in different environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5G/NB-IoT Flexible Printed Circuit (FPC) Antenna from 617 to 5850 MHz | |
Antenna
from KYOCERA AVX
|
| The 9001815F0 from KYOCERA AVX is a 5G and NB-IoT Flexible Printed Circuit (FPC) Embedded Antenna that operates from 617 to 960 MHz, 1415 to 2690 MHz, 3400 to 3800 MHz and 5150 to 5850 MHz. This linearly polarized antenna provides a gain of up to 4.81 dBi with efficiency from 35 to 60%. It has an omnidirectional radiation pattern and supports 2G/3G/4G/5G, LTE CAT-M, NB-IoT, SigFox, LoRa, and cellular LPWA technologies. |
| |
Download Datasheet
Product Details | |
|
