| Products Featured at EuMW 2023 . |
|
|
|
|
|
|
|
|
|
|
|
|
| 4-Channel Vector Signal Generator from 9 kHz to 8.5 GHz | |
Signal Generator
from Keysight Technologies
|
| The N5186A MXG from Keysight Technologies is a 4-channel Vector Signal Generator with a frequency range from 9 kHz to 8.5 GHz. It delivers an output power of up to +27 dBm with a phase noise of -147 dBc/Hz (at 10 kHz offset) and has a frequency resolution of 1 x 10-5 Hz. This signal generator is capable of generating signals with a modulation bandwidth of 960 MHz. |
| |
Download Datasheet |
Product Details | |
|
|
|
| mmWave Antenna Array for Automotive Radar System Testing | |
RF Test Set
from Rohde & Schwarz
|
| The R&S®QAT100 from Rohde & Schwarz is a mmWave Antenna Array for automotive radar testing system that operates from 76 to 81 GHz. It has an electronically steerable frontend that enables realistic target generation. The antenna array has up to 2 x 96 individually switchable transmit antennas and can simulate up to 8 completely independent objects. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Single/Multi-Channel Vector Signal Generators from 10 MHz to 40 GHz | |
Signal Generator
from AnaPico
|
| The APVSGXX from AnaPico are Single/Multi-Channel Vector Signal Generators with a frequency range from 10 MHz to 40 GHz. They are available with up to 4 channels, deliver an output power from +13 to +19 dBm, and have an SSB phase noise of -115 dBc/Hz (at 20 kHz offset, 20 GHz frequency). These signal generators have an RF modulation bandwidth of 400 MHz and an image sideband rejection of -85 dBc. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Modular Microwave Signal Generator from 100 kHz to 40 GHz | |
Signal Generator
from Tabor Electronics
|
| The LSX4091D from Tabor Electronics is a Microwave Signal Generator with a frequency range of 100 kHz to 40 GHz. It provides an output power of 15 dBm with a phase noise of -118 dBc/Hz (at 10 kHz offset, 1GHz frequency) and a frequency resolution of 0.001 Hz. This generator has a switching speed of 20 µs (in-band) and supports FM, AM, Phase modulation, and optional pulse modulation. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
| 24-Way High Density SMPM Cryogenic Cable Assemblies from DC to 40 GHz | |
RF Cable Assembly
from IntelliConnect
|
| The C447-ZZZ-101G from IntelliConnect is a 24-Way High-Density SMPM Cable Assembly that operates from DC to 40 GHz. This assembly has been developed for quantum computing applications and in the development of large-scale high-qubit machines where there is a requirement of microwave cable assemblies for control and readout lines to the quantum processor. The number of channels can be customized based on the requirement. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Flexible Microwave Cable Assembly from DC to 50 GHz | |
RF Cable Assembly
from HUBER+SUHNER
|
| The SUCOFLEX 550E from HUBER+SUHNER is a Flexible Microwave Cable Assembly that operates from DC to 50 GHz. It is available with 2.4 mm connectors and is designed to provide an ideal solution for precise measurements in critical laboratory conditions. This 50-ohm cable assembly delivers phase stable and low-loss performance and has a unique design that ensures zero spring back for efficient handling during measurement. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 110 GHz RF Cables with 1.63 mm Outer Diameter | |
RF Cable
from Insulated Wire
|
| The 047 Series from Insulated Wire are RF Cables that operate up to 110 GHz. They provide a shielding effectiveness of more than 90 dB (up to 18 GHz), have a velocity of propagation of 71%, and have a time delay of 1.43 ns/ft. These cables have a static bend radius of 5.1 mm and a dynamic bend radius of 9.5 mm. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Ultra-Low Noise Amplifier from 1 to 6 GHz for Space Applications | |
RF Amplifier
from Teledyne e2v HiRel Electronics
|
| The TDLNA002093SEP from Teledyne e2v HiRel Electronics is a low noise amplifier developed for high-reliability space and radar applications. The LNA operates from 1 to 6 GHz and provides 21 dB of gain with a noise figure 0.37 dB and has a P1dB of 19 dBm. The device utilizes application-specific biasing and can be biased over a VDD range of 2.7 to 5.0 volts and an IDDQ range of 30 mA to 100 mA. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Single Junction Coaxial Circulators from 10 MHz to 20 GHz | |
RF & Microwave Circulator
from UIY Inc.
|
| The coaxial circulators from UIY operate from 10 MHz to 20 GHz. They have an insertion loss of below 1.2 dB, isolation of over 14 dB, and can handle up to 600 watts of forward power. These circulators are available in a module with N-type and SMA connectors as standard products and can also be ordered as a custom module. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 10 W Power Amplifier from 2 to 18 GHz | |
RF Amplifier
from Quantic PMI (Planar Monolithics)
|
| The PA-2G18G-43-5-40-SFF from Quantic PMI is a Power Amplifier that operates from 2 to 18 GHz. It delivers a saturated output power of 10 W (40 dBm) with a gain of more than 38 dB. This PA requires a DC supply of 22 V and consumes less than 3.3 A of current. It is available in a module that measures 1.30 x 1.80 x 0.88 inches and has removable SMA-female connectors. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Transceiver Module from 71 to 86 GHz for High-Power E-band Links | |
RF Transceiver
from Filtronic
|
| The Hercules II from Filtronic is an E-band Transceiver Module that operates from 71 to 76 (Tx) GHz and 81 to 86 GHz (Rx). It combines Filtronic’s Morpheus II transceiver and a Cerus SSPA module. Each Morpheus module contains all the transmit and receive functions necessary for the RF section of an E-band link and provides a simple connection to a high data rate full duplex modem. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| RF Balun Die from 3 to 18 GHz | |
Balun
from mmTron Inc
|
| The TMC810-1 from mmTron is an RF Balun that operates from 3 to 18 GHz. It converts a balanced signal to an unbalanced signal (and vice-versa) with a phase match of 1° and an amplitude balance of 0.4 dB. This 50-ohm balun is fabricated with high power, high Q GaAs process, and has a common mode rejection of 35 dB. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Wide Bandwidth RF Amplifier from 100 kHz to 100 GHz | |
RF Amplifier
from SHF Communication Technologies
|
| The SHF T850 C from SHF Communication Technologies is an RF Amplifier that operates from 100 kHz to 100 GHz. This amplifier provides a gain of more than 10 dB and has a maximum output eye amplitude of 2 V for linear operation. It has a distributed amplifier design that uses SHF’s monolithic microwave integrated circuit (MMIC) inside special carriers to achieve ultra-wide bandwidth. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 110 GHz Multilayer Capacitors from 10 to 220 nF | |
RF Capacitor
from KYOCERA AVX
|
| The UBC™ Series from KYOCERA AVX are Multilayer Capacitors (MLC) for frequencies from 7.2 kHz to 110 GHz. They have capacitance values from 10 to 220 nF and exhibit ultra-low insertion loss, flat frequency response, and excellent return loss. These capacitors have a rugged ceramic construction with an operating temperature range from -55°C to +125°C. |
| |
Download Datasheet |
Product Details | |
|
|
|
|
|
|
|
|
| Surface-Mount Bandpass Filter with Passband from 2 to 18 GHz | |
Band Pass Filter
from Knowles
|
| The B100MH0W from Knowles is a Band Pass Filter with a passband from 2 to 18 GHz. It has a passband insertion loss of less than 2 dB and provides up to 60 dB of rejection below the passband and 35 dB of rejection above the passband. This filter utilizes integrated Quasi-lumped planar custom designs and is pre-configured for wire bonding. |
| |
Download Datasheet |
Product Details | |
|
|
|
| Linearly-Polarized, Double-Ridged Horn Antenna from 14 to 110 GHz | |
Horn Antenna
from RF SPIN
|
| The DRH110 from RF SPIN is a Double-Ridged Horn Antenna that operates from 14 to 110 GHz. This linearly polarized antenna has an antenna factor from 44.3 to 53.5 dB/m and a VSWR of less than 2.1:1. It can handle a CW input power of 4 W and a peak input power of 8 W. The antenna exhibits low return loss over a wide operating bandwidth and is individually calibrated to cover the 5G frequency band. |
| |
Download Datasheet |
Product Details | |
|
|
|
| 3-Stage LDMOS Integrated Doherty MMIC from 4.7 to 5 GHz | |
RF Transistor
from Ampleon
|
| The B10G4750N12DL from Ampleon is a 3-Stage Integrated Doherty MMIC that operates from 4700 to 5000 MHz. It delivers a nominal output power of 12 W (at 3 dB gain compression) with a power gain of 30 dB and a drain efficiency of 32%. This MMIC is manufactured using Ampleon's state-of-the-art LDMOS technology and has independent control of the carrier and peaking bias. |
| |
Download Datasheet |
Product Details | |
|
