| New RF and Microwave Products this Week . |
|
|
| Low Phase-Noise Gain Block from 0.05 to 10 GHz | |
RF Amplifier
from Mini Circuits
|
| The ZX60-123LPN+ from Mini-Circuits is a Low Phase-Noise Gain Block that operates from 0.05 to 10 GHz. It provides a gain of 16 dB (gain flatness of ±0.9 dB) and has an output P1dB power of up to 16.9 dBm. This gain block has a directivity (isolation-gain) of 11.9 dB (@ 10 GHz), an additive phase noise of -168 dBc/Hz (at 10 kHz offset), and a noise figure of less than 5.8 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| mmWave Silicon SPDT Switch from 100 MHz to 45 GHz | |
RF Switch
from Analog Devices
|
| The ADRF5022 from Analog Devices is a Silicon SPDT Switch that operates from 100 MHz to 45 GHz. It has an ON/OFF switching time of 20 ns, with an insertion loss of less than 2.3 dB and up to 60 dB of isolation. This non-reflective switch can handle up to 30 dBm of RF input power via the through path, 24 dBm via the terminated path, and 30 dBm for the hot switching at the common RF port. It requires a dual DC supply of +3.3 V and -3.3 V and consumes less than 510 µA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low Power Bluetooth 5.4 SoC with Support for Mesh, Thread and Matter Protocols | |
Wireless SoC
from Nordic Semiconductor
|
| The nRF54L15 from Nordic Semiconductor is a Multiprotocol Bluetooth 5.4 Systems-on-Chip (SoC) with support for Bluetooth (LE) Low Energy, Bluetooth mesh, Thread, and Matter protocols. It provides a Tx power of up to 8 dBm and has an Rx sensitivity of -98 dBm. It delivers a data rate of 1 Mbps in Bluetooth (LE) mode and also includes a new 4 Mbps data rate option for 2.4 GHz proprietary protocols, with improved throughput, efficiency, and latency. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1024-QAM 2.4/5/6 GHz Wi-Fi 6/6E and Bluetooth 5.3 Combo Chip | |
RF Module
from Infineon Technologies
|
| The AIROC CYW55571 from Infineon Technologies is a 2.4/5/6 GHz Wi-Fi 6/6E (802.11ax) + Bluetooth 5.3 Combo Chip. It supports 1024-QAM modulation and delivers a data rate of up to 600 Mbps over a channel bandwidth of 20/40/80 MHz. This combo chip has been designed to offer exceptional high-quality audio/video streaming and seamless connectivity experiences in congested network environments and significantly reduce latency by operating in the 6 GHz spectrum. |
| |
Download Datasheet
Product Details | |
|
|
|
| Multi-Orbit, Low-Profile Hybrid-GEO-LEO Terminal for Military Applications | |
Electronically Steerable Antenna
from Kymeta
|
| The Osprey™ u8 from Kymeta is a Hybrid-GEO-LEO (HGL) Terminal that can be mounted on various military vehicles and vessels. It provides multi-orbit capability for mission-critical operations while on the move. This flat-panel terminal leverages the OneWeb Low Earth Orbit (LEO) network and combines the flexibility and reliability of GEO satellites with LTE for network redundancy in contested environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Channel Direction Finding and Spectrum Monitoring System from 9 kHz to 18 GHz | |
Direction Finding System
from CRFS
|
| The RFeye Array 300 Series from CRFS is an intermediate-sized spectrum monitoring and direction-finding system for vehicle-mounted deployment or fixed installations. The Array 300 uses a unique multi-layer approach that is more sophisticated and versatile than traditional direction finding. High-performance spiral directional antenna modules are optimized for different frequency bands and arranged in multiple orientations. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Copper Mountain Technologies | | | |
|
|
| USB Programmable Signal Generator from 6 to 18 GHz | |
Signal Generator
from Vaunix
|
| The LMS-183CX from Vaunix is a USB Programmable RF Signal Generator that operates from 6 to 18 GHz. It has a resolution of 100 Hz and switching time of 0.02 ms. The signal generator provides calibrated power control from -70 dBm to 10 dBm (80 dB dynamic range) in 0.5 dB steps. It has a phase noise of better than -130 dBc/Hz at 6 GHz, spurious levels of lower than -55 dBc and harmonics of less than -35 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| 16x64 Non-Blocking Solid-State Switch Matrix from 20 MHz to 6 GHz | |
RF Distribution System
from Mu-Del Electronics
|
| The 16MDMS-2600-64NB/49 from Mu-Del Electronics is a 16x64 Non-Blocking Solid-State Switch Matrix that operates from 20 MHz to 6 GHz. It has 16 inputs and 64 outputs making it ideal for a wide range of applications. The switch matrix provides 45 dB of isolation and unity gain with a flatness of +/-3 dB. It can be controlled via a touch screen / remote interface. |
| |
Product Details | |
|
|
|
| mm-Wave Directional Coupler from 6 to 40 GHz | |
Directional Coupler
from MECA
|
| The 765-20-23.000 from MECA is a 5G-ready mm-wave Directional Coupler that operates from 6 to 40 GHz (Covering the C to V-Band). It has a coupling value of 20 dB and can handle up to 20 watts of average power. The coupler has an insertion loss of less than 1.3 dB and directivity of more than 12 dB. It is available in a module with 2.92mm (F) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 40 GHz Analog Signal Generators for Microwave and mmWave Testing | |
Signal Generator
from SIGLENT
|
| The SSG6000A Series from Siglent are Analog Signal Generators with a frequency range up to 13.6/20/40 GHz. Their output amplitude level can be set from -130 dBm to +24 dBm with an amplitude resolution of 0.01 dB and phase noise of -135 dBc/Hz (at 20 kHz offset, 1 GHz frequency). These signal generators support AM and pulse modulation, pulse sequence generator, power meter control and other functions. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by Copper Mountain Technologies | | |
|
|
| 200 W Space-Qualified GaN Solid-State Power Amplifier from 20 to 1000 MHz | |
RF Amplifier
from Aethercomm
|
| The SSPA 0.020-1.000-200 from Aethercomm is a GaN Solid-State Power Amplifier (SSPA) that operates from 20 to 1000 MHz. It delivers a saturated output power of 200 W with a small signal gain of 60 dB and a power-added efficiency (PAE) from 45 to 55%. This SSPA includes broadband GaN MMICs and discrete devices that can be tuned to operate in bands of up to 2.5 GHz and can cover the GPS L1, L2, and L5 bands. |
| |
Download Datasheet
Product Details | |
|
|
|
| 6-Channel SPST Signal Relay from DC to 3 GHz | |
RF Switch
from Menlo Micro
|
| The MM1205 from Menlo Micro is a 6-channel SPST Signal Relay that operates from DC to 3 GHz. This switch allows users to implement different signal topologies such as dual SP3T, triple SP2T, or a 2 x 3 matrix. It can handle a CW input power of up to 25 W (per channel) and a peak input power of less than 200 W per channel. Each channel provides low ON-state contact resistance and insertion loss and high OFF-state isolation. |
| |
Download Datasheet
Product Details | |
|
|
|
| mmWave LO Driver Amplifier from 45 to 95 GHz | |
RF Amplifier
from Marki Microwave
|
| The AMM-0001M from Marki Microwave is an mmWave LO Driver Amplifier that operates from 45 to 95 GHz. It delivers a saturated output power of more than 15 dBm with a small signal gain of up to 11 dB and has reverse isolation of 55 dB. This amplifier requires a DC supply of 3.5 V and consumes 350 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rackmount RF Shielded Test Enclosure from 20 MHz to 6 GHz | |
RF Shielded Test Enclosure
from RF Electronics
|
| The HDRF-2460 from RF Electronics is an RF Shield Box that operates from 20 MHz to 6 GHz and is designed for WLAN and wireless device testing. It has a rugged construction and thick RF absorbing foam that deadens standing waves and reflections. The shield box provides isolation of more than 90 dB and is equipped with shielded power filters for powering devices in the box while still blocking all wireless signals. |
| |
Download Datasheet
Product Details | |
|
|
|
| Precision Waveguide AWGN Noise Sources from 18 to 110 GHz | |
Noise Source
from Noisecom
|
| The NC5000A Series from Noisecom are AWGN Noise Sources for frequency ranges from 18 to 110 GHz. They feature outstanding stability, fast switching speeds, and have a ripple-free response over standard waveguide bands. These noise sources support calibration in 1 GHz steps, have a noise output rise/fall time of less than 1 µs and a noise output variation (with temperature) of better than 0.01 dB/°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| 18 GHz Multi-Probe Antenna System for CTIA Certifiable Measurement Facilities | |
Antenna Measurement System
from Microwave Vision Group
|
| The SG 64 from Microwave Vision Group is a Multi-Probe Antenna Measurement System with a frequency range from 70 MHz to 18 GHz. It supports near-field/spherical and far-field measurements, has a dynamic range of 70 dB, and a measurement time of less than 3 minutes for 11 frequencies. This system can measure a variety of parameters including sidelobe levels, front-to-back ratio and 1D/2D/3D radiation patterns in any polarization (linear or circular), antenna efficiency, and more. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Integrated Wi-Fi Front-End Modules for Automotive Applications | |
Front End Module
from Qualcomm
|
| The QXM19xx from Qualcomm are Wi-Fi Front End Modules that are designed for automotive applications. They operate in the 2.4 GHz (2400 – 2483 MHz) and 5/6 GHz (5150 – 7115 GHz) bands and consist of small-size RFFEs with integrated active and passive components. These FEMs support Wi-Fi 6, Wi-Fi 6E, and Wi-Fi 7 standards with advanced Wi-Fi 7 features like 320 MHz channel support, multi-link operation (MLO), 4K QAM, etc. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 6 dB Fixed Attenuator from DC to 110 GHz | |
Fixed Attenuator
from HYPERLABS
|
| The HL9429 from Hyperlabs is a Fixed Attenuator that operates from DC to 110 GHz. It provides an attenuation of 6 dB with an accuracy of ±1 dB. This ultra-broadband attenuator can handle a maximum input power of 24 dBm, has an amplitude match of ±0.5 dB, and a phase match of 5°. It is available in a module that measures 1.141 x 0.377 x 0.377 inches with 1.0 mm female/male connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Low-Profile, High-Flexibility Cable Assemblies from DC to 50 GHz | |
RF Cable Assembly
from ANOISON Electronics LLC
|
| The mBend Series from Anoison are RF Cable Assemblies that operate from DC to 50 GHz. They are designed for low-profile coaxial connections in systems where RF module interconnections have limited space and demand bending the cables immediately after the connectors. These cable assemblies have a minimum bend radius of 0.20 inches (static) and 0.40 inches (repeated) with an amplitude stability of ±0.1 dB and phase stability (vs. flexure) of ±5°. |
| |
Download Datasheet
Product Details | |
|
|
|
| 32.768 kHz Miniature TCXOs | |
TCXO
from Abracon LLC
|
| The ATXK-H Series from Abracon are 32.768 kHz Miniature Temperature Controlled Crystal Oscillators (TCXOs). They produce a CMOS output waveform with a frequency stability of ±8.0 ppm. These TCXOs require a DC supply of 3.3, 2.5 or 1.8 V and consume 1.0 µA of current. They have a start-up time of less than 0.5 seconds and a rise/fall time of better than 40 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Channel, 12-bit Oscilloscopes with Bandwidth from 20 to 65 GHz | |
Oscilloscope
from Teledyne LeCroy
|
| The WaveMaster 8000HD from Teledyne LeCroy are Oscilloscopes with bandwidths from 20 to 65 GHz. These 4-channel oscilloscopes have a 12-bit resolution with a maximum sample rate of 320 GS/s. They are designed to support the entire development cycle – from first-silicon characterization, and link validation over channels, to debugging – across the entire protocol stack to enable faster time-to-market. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
