| Featured Products this Week . |
|
|
| 30 W Solid-State Power Amplifier from 18 to 40 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2145B-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 18 to 40 GHz. It delivers a CW/pulsed output power of 30 W with a power gain of more than 44 dB and a gain adjustment range of 20 dB. This amplifier has a Class A/AB linear design with a 2-tone intermodulation (IMD) of -30 dBc, harmonics of less than -20 dBc, and spurious emission of better than -60 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| SMT Mini Ultra-Wideband Transformers from 1 MHz to 8.5 GHz | |
Balun
from Coilcraft
|
| The UWB Series from Coilcraft are Mini Transformers that operate from 1 MHz to 8.5 GHz. They can handle up to 250 mW of RF input power and have a 250 mA current rating. They are available in impedance ratios of 1:1, 1:2, and 1:4. These AEC-Q200 qualified mini transformers have an insertion loss of less than 1.5 dB and a maximum DCR of 71 mOhm. |
| |
Download Datasheet
Product Details | |
|
|
|
| Successive Detection Log Video Amplifier from 2 to 18 GHz | |
DLVA
from Quantic PMI (Planar Monolithics)
|
| The SDLVA-6G18G-CD-2-OPT218 from Planar Monolithics Industries is a Successive Detection Log Video Amplifier (SDLVA) that operates from 2 to 18 GHz. It has a log range from -70 to 5 dBm, a log slope of 25 mV/dB, and Tangential Signal Sensitivity (TSS) of -70 dB. This video amplifier has a pulse range from 30 ns to CW, a rise time of 6 ns, and a recovery time of 60 ns. |
| |
Download Datasheet
Product Details | |
|
|
|
| Tx/Rx Module with Integrated SPDT Switch and LNA from 1 to 6 GHz | |
Front End Module
from MACOM
|
| The MAMF-011164 from MACOM is an Integrated Switch and Low-Noise Amplifier Front End Module that operates from 1 to 6 GHz. It consists of an antenna switch and a dual-stage low-noise amplifier. In Tx mode, this module has an insertion loss of 0.3 dB and a P1dB of 40 dBm. In Rx mode, it provides a gain of 35 dB and has a noise figure of less than 1.3 dB. It has been developed for use in 5G massive MIMO, small cell BTS, and TDD-based communications systems. |
| |
Download Datasheet
Product Details | |
|
|
|
| 1 W Power Amplifier from 3550 to 4200 MHz for 5G Applications | |
RF Amplifier
from Skyworks Solutions
|
| The SKY66523-11 from Skyworks is a High-Efficiency Power Amplifier that operates from 3550 to 4200 MHz. It delivers an output power of 30 dBm (1 W) with a gain of 33 dB. The amplifier has integrated active biasing circuitry to compensate PA performance over temperature, voltage, and process variations. It is available in a 16-pin package that measures 5 x 5 mm and is ideal for use in 5G NR enterprise small cells, driver amplifiers for micro/macro base stations, and 5G massive MIMO drivers. |
| |
Download Datasheet
Product Details | |
|
|
|
| SPST Tuning Control Switch from 100 to 3000 MHz | |
RF Switch
from pSemi, A Murata Company
|
| The PE613010 from pSemi is an SPST Tuning Control Switch that operates from 100 to 3000 MHz. The switch can handle an input power of up to 38 dBm and has an insertion loss of less than 0.95 dB. It has a switching time of 7 µs and provides up to 11 dB of isolation. It is based on pSemi’s UltraCMOS technology with an open reflective architecture and can be used for a wide variety of tuning circuit topologies with an emphasis on impedance matching and aperture tuning applications. |
| |
Download Datasheet
Product Details | |
|
|
| Sponsored by SV Microwave | | |
|
|
| Bluetooth 5.2 Wireless Module for Industrial/Medical Applications | |
RF Module
from Murata
|
| The Type 2EG from Murata is a Bluetooth 5.2 Wireless Module for connected IoT edge devices in industrial and medical applications. It is based on Onsemi’s RSL15 SoC and has a built-in ARM Cortex M33 core with 80 kB RAM (including 64 kB user RAM) and 512 kB Flash. This module has an integrated IoT cybersecurity platform and supports Bluetooth’s higher throughput, increased broadcast capacity, improved channel co-existence algorithm (SCA), and long range and proximity features. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4/5/6 GHz Wi-Fi 6E and Bluetooth 5.3 Modules for Automotive Applications | |
RF Module
from u-blox AG
|
| The JODY-W4 Series from u-blox are Wi-Fi 6E and Bluetooth 5.3 Modules that operate in the 2.4, 5, and 6 GHz bands. They deliver a data rate of up to 1.2 Gbps (Wi-Fi 6E) and support 2x2 MU-MIMO with 20/40/80 MHz Wi-Fi channels. These modules support dual-mode Bluetooth classic and Bluetooth Low Energy 5.3 with Bluetooth LE Audio and also support Bluetooth LE Angle-of-Arrival and Angle-of-Departure for direction-finding applications. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W, 2-Way Wilkinson Power Divider from 8 to 50 GHz | |
Power Divider
from Knowles
|
| The PDW09692 from Knowles is a 2-Way Wilkinson Power Divider that operates from 8 to 50 GHz. It can handle an input power of up to 10 W (as a divider) and 5 W (as a combiner). This divider provides an isolation of 20 dB and has an insertion loss of less than 2.5 dB. It utilizes DLI’s low-loss temperature stable materials to offer small size and minimal performance variation over temperature. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 W, 2-Way Power Divider from 10 to 65 GHz | |
Power Divider
from XMA Corporation
|
| The OS6790-6065-02 from XMA Corporation is a 2-Way Power Divider that operates from 10 to 65 GHz. It can handle an input power of 10 W, provides an isolation of more than 15 dB, and has an insertion loss of less than 4.5 dB. This 50-ohm power divider has an amplitude balance of ±1.5 dB and a phase balance of ±15°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Quad-Directional Coupler from 4 to 18 GHz | |
Directional Coupler
from Werbel Microwave
|
| The C-9001-8.5 from Werbel Microwave is a Quad-Directional Coupler that operates from 4 to 18 GHz. This unique multi-output coupler eliminates the need for an additional power divider when multiplexing. This 8.5 dB coupler provides a directivity of 10 dB and has a mainline loss of 5.2 dB. It has four separate output bands and offers the ability to filter different bands (4 – 8 GHz, 7 – 12 GHz, 11 – 15 GHz, and 14 – 18 GHz) without the need of a power splitter, which reduces the path insertion loss. |
| |
Download Datasheet
Product Details | |
|
|
|
| Wideband Telemetry Record and Playback System | |
RF Spectrum Recording and Playback System
from Wideband Systems, Inc
|
| The DRS8500X from Wideband Systems is a Digital Recording System (DRS) for Telemetry Applications. It provides exceptional bandwidth and scalability while maintaining strict compliance with the IRIG-106 Chapter 10 standard. The recorder supports IRIG-A, IRIG-B, & IRIG-G, external 1PPS & 10 MHz references, and optional NASA 36 timing interfaces. |
| |
Download Datasheet
Product Details | |
|
|
|
| HF Software-Defined Communication System for Airborne Applications | |
Software Defined Radio
from Collins Aerospace
|
| The HF-9500 from Collins Aerospace is a HF Communication System that is suitable for airborne applications. It features digital signal processing technology that delivers high-quality, reliable performance for military fixed-wing airborne applications. This system delivers an output power of 400 W and is designed to use a common suite of hardware and software components that meet Open Systems Architecture (OSA) and HF modernization requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
| Vertical Launch PCB Connectors from DC to 110 GHz | |
RF Connector
from Withwave
|
| The Vertical Launch Connectors from Withwave operate from DC to 110 GHz. These 50-ohm connectors are available in SMA, 2.92 mm, 2.4 mm, 1.85 mm, and 1.0 mm options. They provide excellent electrical and vertical transition performance over the entire operating frequency range. The connectors can be easily installed on the designed PCB substrate without the need for soldering, which greatly saves the installation time. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 kW Rugged Waveguide Circulator from 2.7 to 2.9 GHz | |
Waveguide Circulator
from Mega Industries
|
| The SC3-543 from Microwave Techniques is an S-Band Circulator that operates from 2700 to 2900 MHz. It can handle an average input power of up to 2.4 kW and a peak input power of 24 kW. This circulator is optimized to minimize the insertion loss and maximize isolation at the frequency, bandwidth, and power level of interest. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Basic Spectrum Analyzer from 9 kHz to 4 GHz for Essential RF Applications | |
RF Spectrum Analyzer
from Keysight Technologies
|
| The N9321C from Keysight is a Basic Spectrum Analyzer (BSA) that operates from 9 kHz to 4 GHz. It has an analysis bandwidth of up to 1 MHz, a phase noise of -90 dBc/Hz (@10 kHz offset), and a DANL of -152 dBm (@1 GHz). This BSA is built to address essential applications and offers proven test efficiency, best-in-class usability, and flexibility to adapt to new requirements. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| RFCMOS Automotive Radar SoC from 76 to 81 GHz | |
Automotive Radar Chipset
from NXP Semiconductors
|
| The SAF85xx from NXP Semiconductors is an Automotive Radar SoC that operates from 76 to 81 GHz. It has been optimized for fast chirp modulation used in automotive FMCW radar applications. This fully integrated RFCMOS chip integrates a radar transceiver with a radar microprocessor unit (MPU) based on Arm® Cortex® - A53, Arm Cortex - M7 cores, and SRAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| 5 W, WPC Qi 1.2.4 Monolithic Wireless Power Transmitter | |
Wireless Charging Transmitter
from STMicroelectronics
|
| The STWBC86 from STMicroelectronics is a Monolithic Wireless Power Transmitter that is compatible with the WPC Qi 1.2.4 specification. It delivers an output power of 5 W and supports robust ASK & FSK communication. This wireless power transmitter has a 32-bit, 64 MHz ARM Cortex micro-controller, 8 KB SRAM, 10-bit A/D converter, and on-chip current sense. |
| |
Download Datasheet
Product Details | |
|
|
|
| mmWave RF Module from 57 to 71 GHz for Long-Range Applications | |
Beamforming IC
from Peraso Technologies, Inc
|
| The PRM2142X from Peraso is a mmWave RF Module that operates from 57 to 71 GHz. It has a 32-element vertically polarized antenna array and utilizes the Peraso X720 802.11ad phased array chipset which includes a baseband processor and a high-power mmWave beamforming transceiver RFIC. The module uses Peraso’s Directional Beam Scan and Connect (DBSC) technologies for establishing long-range Fixed Wireless links and the Peraso STA Focus for long-range Fixed Wireless Access point-to-multipoint systems. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Medium Power Amplifier from 2 to 20 GHz | |
RF Amplifier
from Narda-MITEQ
|
| The MPAS-10-02002000-70-30P from Narda-Miteq is a Medium Power Amplifier that operates from 2 to 20 GHz. It provides more than 13 dB of gain with a noise figure of less than 7 dB and has an output P1dB of 31 dBm. This amplifier offers unconditional stability and has RF ports matched to 50 Ohms. It requires a DC supply of 16 V, consumes less than 800 mA of current, and has an internal DC voltage regulation. |
| |
Download Datasheet
Product Details | |
|
|
|
| Weatherproof Compact Block Up-Converter from 7.9 to 8.4 GHz | |
Block Up Converter
from Mission Microwave
|
| The Cube-X-40 from Mission Microwave is a Block Upconverter (BUC) that converts input frequencies from 950 – 1450 MHz to output frequencies from 7.9 – 8.4 GHz. It delivers an output power of up to 40 W (46 dBm) with a gain of more than 55 dB and has a phase noise of -103 dBc/Hz (@1 MHz offset). This BUC has an inbuilt variable attenuator with an attenuation range of 31 dB and can be adjusted in steps of 0.25 dB. |
| |
Download Datasheet
Product Details | |
|
