| Featured Products this Week . |
|
|
|
|
|
|
|
| Spectrum Analyzer from 1 Hz to 4.4 GHz for Lab Use | |
RF Spectrum Analyzer
from Signal Hound
|
| The USB-SA44B from Signal Hound is a Software Defined Radio (SDR) optimized RF Spectrum Analyzer that operates up to 4.4 GHz. It has a wide dynamic range from -151 to 10 dBm with a resolution bandwidth from 0.1 Hz to 250 kHz and 5 MHz. It is a compact, easy to use spectrum analyzer for use in the lab, by ham radio enthusiasts, and electronics hobbyists. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB-Powered, Lightweight Vector Signal Generator from 75 MHz to 6 GHz | |
Signal Generator
from Aaronia AG
|
| The V6-VSG240X from Aaronia is a Real-Time Vector Signal Generator that operates from 75 MHz to 6 GHz. It has a real-time bandwidth of 240 MHz and supports all standard signal types (CW, sweep, chirp, pulse, etc.). This signal generator is available with a number of additional software extensions that allow signal sweeping in between 75 MHz to 6 GHz in less than 5 ms or complex IQ vector signal modulation with up to 4096QAM. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2-Port Vector Network Analyzer from 100 kHz to 18 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The S5180B from Copper Mountain Technologies is a 2-Port Vector Network Analyzer that operates from 100 kHz to 18 GHz. It has a built-in pulse modulator, synchronizer, and a set of logical generators supporting various pulse generation options and corresponding measurement modes. Pulses can be generated Synchronously or Asynchronously with respect to VNA measurement timing. |
| |
Download Datasheet
Product Details | |
|
|
|
| 250 W Multi-Purpose Solid-State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 250S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a saturated output power of more than 250 W with small-signal gain of 61 dB. The amplifier has a Class A design, making it suitable for EMC test applications where continued operation into high VSWR loads including open and short circuits is required. |
| |
Download Datasheet
Product Details | |
|
|
|
| 800 W Class A/AB Solid State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2030-800-LC from Exodus Advanced Communications is a Solid-State Power Amplifier that operates from 1 to 6 GHz. It delivers a CW/Pulsed saturated output power of more than 800 W with a power gain of over 59 dB and a gain adjustment range of over 20 dB. This amplifier has a class A/AB linear design with spurious emissions of better than -60 dBc and harmonics of -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
| FREE eBook - Download Now! | | |
|
|
|
|
|
|
|
|
|
|
|
|
| Multi-Constellation GNSS Module with Jamming Rejection | |
GNSS Module
from Telit Communications
|
| The SE868K5-I from Telit is a Multi-Constellation, Multi-Frequency GNSS Module. It has 75 physical acquisition and tracking channels and supports A-GNSS with Ephemeris file injection as well as onboard Ephemeris prediction (A-GPS). This module has EGNOS, WAAS, GAGAN, and MSAS capabilities embedded with correction of positional error correction for augmented accuracy and integrity. |
| |
Download Datasheet
Product Details | |
|
|
|
| 2.4 GHz WLAN Front-End Module for Mobile Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY85347-11 from Skyworks Solutions is a 2.4 GHz WLAN Front-End Module. It consists of a 2.4 GHz fully matched power amplifier (PA), positive slope power detector, low-noise amplifier (LNA) with integrated bypass mode, and single-pole double-throw (SPDT) switch. This module also includes a transmitter power detector with 26 dB of dynamic range and a digital enable control for transmitter power ramp ON/OFF control. |
| |
Download Datasheet
Product Details | |
|
|
|
| Inverted Flexible PIFA Antennas from 2400 to 2480 MHz | |
Antenna
from Laird Connectivity
|
| The i-FlexPIFA Series from Laird Connectivity are Inverted Flexible PIFA Antennas that operate from 2400 to 2480 MHz. These linearly polarized antennas provide a peak gain of +3.1 dBi and have a VSWR of less than 2.5:1. They have a strong adhesive that holds to the surface during humidity exposure and hot/cold cycles. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2 W Space-Qualified Isolator from 7 to 10.5 GHz | |
RF & Microwave Isolator
from Smiths Interconnect
|
| The I70105/A from Smiths Interconnect is a Space-Qualified Isolator that operates from 7 to 10.5 GHz. It can handle a forward/reverse CW input power of 2 W, provides more than 21 dB of isolation, and has an insertion loss of less than 0.35 dB. The isolator is designed to be used for space-based frequency converters and receivers. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Ethernet-Controlled 60 dB Programmable Attenuators from 6.5 to 500 GHz | |
Waveguide Attenuator
from Flann Microwave
|
| The 625-03 Series from Flann Microwave are Ethernet-Controlled Precision Programmable Attenuators that operate from 6.5 to 500 GHz. They can handle an input power of up to 6 W, provide an attenuation range from 0 to 60 dB and have an insertion loss of less than 5 dB. These attenuators utilize the proven rotary vane principle and Flann’s industry-standard experience to offer a very high performance. |
| |
Download Datasheet
Product Details | |
|
|
|
| 150 W Conduction/Convection-Cooled RF Terminations from DC to 2.5 GHz | |
Termination
from Weinschel by Spectrum Control
|
| The 1439 Series from Weinschel by Spectrum Control are Conduction/Convection-Cooled RF Terminations that operate from DC to 2.5 GHz. They can handle an average input power of 150 W, a peak input power of up to 10 kW (5 µs pulse width, 0.75% duty cycle), and have a VSWR of 1.2:1. These terminations can be mounted either in a horizontal or vertical position. |
| |
Download Datasheet
Product Details | |
|
|
|
| 90 Degree Hybrid Coupler from 10 to 40 GHz | |
90 Degree Hybrid Coupler
from KRYTAR
|
| The 3100400 from Krytar is a 90 Degree Hybrid Coupler that operates from 10 to 40 GHz. It has a coupling factor of 3 dB, an insertion loss of less than 2 dB and provides isolation of more than 12 dB. The unit has an amplitude imbalance of ±0.7 dB, a phase imbalance of ±10 degrees, and is used in circuits requiring a balanced division of power into two transmission lines with a 90-degree phase separation. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1.5 Gbps 4x4 MIMO Point-to-Point/Point-to-Multipoint Radio from 5.15 to 5.85 GHz | |
Microwave Backhaul Radio Links
from Proxim
|
| The Stratum X5 from Proxim is a Point-to-Point/Point-to-Multipoint (PtP/PtMP) Radio that operates from 5.15 to 5.85 GHz. It supports channel sizes of 20 MHz, 40 MHz, and 80 MHz (80 +80 MHz, and 160 MHz via future upgrades), 2x2, and 4x4 MIMO and delivers a data rate of more than 1.5 Gbps. This radio utilizes a BPSK/1024-QAM and OFDM modulation scheme with maximum throughput and uses antenna diversity to improve radio stability in harsh environments. |
| |
Download Datasheet
Product Details | |
|
|
|
| 8 GHz SP4T Switch for Massive MIMO 4G/5G Base Stations | |
RF Switch
from pSemi, A Murata Company
|
| The PE42446 from pSemi is an SP4T Switch that operates from 10 MHz to 8 GHz. It provides more than 60 dB of isolation to prevent interference and maintain signal integrity and has a switching time of 250 ns. This switch integrates seamlessly into 4G and 5G base stations and massive MIMO architecture and provides digital pre-distortion (DPD) feedback loops and transmitter monitoring signal paths. |
| |
Download Datasheet
Product Details | |
|
|
|
| Resilient 32x32 Distributive Switch Matrices from 850 to 2150 MHz | |
Switch Matrix
from ETL Systems
|
| The NGM-101-XXXX Series from ETL Systems are Switch Matrices that operate from 850 to 2150 MHz. They have a distributive, non-blocking design and are available with up to 32 inputs and 32 outputs and any input can be connected to any output. These matrices have a switching time of less than 50 ms (from receipt of a command to implementation of path change) and provide isolation of up to 75 dB between any two ports. |
| |
Download Datasheet
Product Details | |
|
|
|
| Robust Long Range Wireless Data Link from 70 MHz to 6 GHz | |
Data Link
from Simpulse
|
| The SL200 from Simpulse is a Mobile Data Link Modem for bi-directional wireless data and video transmission in challenging environments. It provides a robust and secure link with a bitrate from 10 kbits/sec to 5 Mbits/sec for long range Line-of-Sight (LOS) and Non-LOS applications. The SL200 has a transmission range of up to 80 km (HD video) or 130 km (low-resolution video) in LOS and reduced RF power conditions (0.5W). |
| |
Download Datasheet
Product Details | |
|
|
|
| 4-Port Omnidirectional Cellular + Wi-Fi Antenna from 617 to 7125 MHz | |
Antenna
from Huber+Suhner
|
| The SENCITY 1399.17.0312 from HUBER+SUHNER is a 4-Port Cellular + Wi-Fi Antenna that operates from 617 to 7125 MHz. It supports 2x2 cellular MIMO for 3G/4G/5G and 2x2 Wi-Fi MIMO in all Wi-Fi 6E bands. This vertically polarized antenna includes 2 radiators each for cellular bands and Wi-Fi/WiMAX bands. It has an omnidirectional radiation pattern, provides a gain of up to 6 dB, and has a VSWR of less than 2:1. |
| |
Download Datasheet
Product Details | |
|
