| New RF and Microwave Products this Week . |
|
|
| Right-Angle Waveguide-to-Coaxial Adapters from 1 to 110 GHz | |
Waveguide to Coax Adapter
from Scientific Microwave Corporation
|
| The SMC 137 Series from Scientific Microwave Corporation are Right-angle Waveguide-to-Coaxial Adapters from 1 to 110 GHz. They are available with 1 mm / 1.85 mm / 2.4 mm / K-type / SMA & N-type female coaxial interface on one end with various waveguide interface options. These adapters support full band operation, have deep matching levels and a high-power handling capability. |
| |
Download Datasheet
Product Details | |
|
|
|
| USB Controlled Digital Attenuator from 200 to 8000 MHz | |
RF Variable Attenuator
from Vaunix
|
| The LDA-908V from Vaunix is a Solid-State Digital Attenuator that operates from 200 to 8000 MHz. It has an attenuation range of 90 dB (in 0.1 dB steps) with an attenuation accuracy of ±1 dB and has a switching speed of 15 µs. This attenuator can handle an input level of 23 dBm and has an insertion loss of less than 11 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Fully-Integrated Dual-Channel Radio System from 4400 to 4940 MHz | |
Data Link
from Triad RF Systems
|
| The THPR1021 from Triad RF Systems is a 2-channel High-Power Radio that operates from 4400 to 4940 MHz. This radio integrates the necessary RF amplification, control circuitry, and interfaces to achieve higher RF output power, greater throughput, and longer link distances compared to standalone radios. It combines Silvus Streamcaster SC4210P-467-O OEM radio at its core with Triad’s high-power RF subsystems in a low SWaP package. |
| |
Download Datasheet
Product Details | |
|
|
|
| 30 W, Class-A Solid-State Power Amplifier from 1 to 6 GHz | |
RF Amplifier
from AR RF/Microwave Instrumentation
|
| The 30S1G6C from AR RF/Microwave Instrumentation is a Solid-State Power Amplifier (SSPA) that operates from 1 to 6 GHz. It delivers a CW output power of more than 30 W with a small signal gain from 46 to 50 dB. This Class-A SSPA provides protection from input overdrive beyond 0 dBm as well as protection from various failure conditions including over-temperature and power supply faults. |
| |
Download Datasheet
Product Details | |
|
|
|
| 100 W Class A/AB Solid-State Power Amplifier from 6 to 12 GHz | |
RF Amplifier
from Exodus Advanced Communications
|
| The AMP2053B-1 from Exodus Advanced Communication is a Solid-State Power Amplifier that operates from 6 to 12 GHz. It delivers a CW/Pulsed output power of 100 W with a power gain of more than 50 dB. This class A/AB linear amplifier provides high efficiency with excellent reliability and ruggedness. It has a 2-tone intermodulation (IMD) of -30 dBc, spurious emissions of -60 dBc, and harmonics of less than -20 dBc. |
| |
Download Datasheet
Product Details | |
|
|
|
| Flexible Microwave Cable Assembly from DC to 26.5 GHz | |
RF Cable Assembly
from HUBER+SUHNER
|
| The SUCOFLEX 526E from HUBER+SUHNER is a Flexible Microwave Cable Assembly that operates from DC to 26.5 GHz. It is available with N-type, 3.5 mm, or SMA connectors and is designed to provide an ideal solution for precise measurements in critical laboratory conditions. This 50-ohm cable assembly delivers high phase and amplitude stability with flexure and movement and has a unique design that ensures zero spring back and facilitates efficient handling during measurement. |
| |
Download Datasheet
Product Details | |
|
|
| Featured Interview | | Interview with Walter Magiera from Filtronic | | everything RF recently interviewed Walter Magiera who is the Chief Commercial Officer at Filtronic. Walter has been the head of Filtronic’s commercial function for four years. His primary responsibility is to lead the growth of the organization and to develop effective go-to-market sales, channel development, and marketing strategies. With over 20 years of experience as an executive, he has successfully led sales and marketing functions for various global players within the wireless industry. Click here to read more | | | |
|
|
| 4-Channel Programmable Attenuator Assembly from 200 to 6000 MHz | |
RF Variable Attenuator
from JFW Industries
|
| The 50BA-011-95 from JFW Industries is a Programmable Attenuator Assembly that operates from 200 to 6000 MHz. It has four individually controlled solid-state programmable attenuators with attenuation range from 0 to 95 dB in 1 dB steps (attenuation accuracy of ± 1.25 dB). The attenuators can handle an RF input power of up to +33 dBm, have an insertion loss of less than 8.8 dB and a VSWR of 2:1. |
| |
Download Datasheet
Product Details | |
|
|
|
| Solid-State Programmable Attenuator from 0.1 to 18 GHz | |
RF Variable Attenuator
from Weinschel by Spectrum Control
|
| The 4209-18-63 from Weinschel by Spectrum Control is a Programmable Attenuator that operates from 0.1 to 18 GHz. It provides an attenuation of up to 63 dB with step size of 0.5 dB and a switching speed of 40 ns. This solid-state attenuator can handle an input power of up to 28 dBm and has an insertion loss of less than 5.2 dB. |
| |
Download Datasheet
Product Details | |
|
|
|
| Voltage Variable Attenuator from DC to 12 GHz | |
RF Variable Attenuator
from MACOM
|
| The MAAV-011017 from MACOM is a Voltage Variable Attenuator that operates from DC to 12 GHz. It has an attenuation range of 32 dB, can handle an input power of up to 32 dBm (~1.5 W), and has an insertion loss of less than 3.8 dB. It requires a DC supply from 3.15 to 5.25 V and consumes less than 1.7 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| Multi-band Front-End Module for 4G/LTE and 5G NR Applications | |
Front End Module
from Skyworks Solutions
|
| The SKY58109-51 from Skyworks is a Front-End Module for multi-band 4G/LTE and 5G NR applications. It consists of power amplifier (PA) blocks, low-noise amplifier (LNA) blocks, integrated bi-direction RF coupler with cascade support, and duplexers for LTE Bands 1, 3, 40, 32, 25, 66, 30, 7, 41, 34, 39. |
| |
Download Datasheet
Product Details | |
|
|
|
| 10 MHz, Low-Profile CMOS OCXO for Timing Synchronization Applications | |
OCXO
from Dynamic Engineers
|
| The OCXO3627CO-10MHz-A-V from Dynamic Engineers is a Low-Profile Oven-Controlled Crystal Oscillator (OCXO) that operates at 10 MHz. This OCXO provides a CMOS output with a frequency stability (vs. temperature) of ±10 ppb and has an SSB phase noise of -140 dBc/Hz (at 100 Hz offset). It is designed for applications where both exceptional frequency stability and timing are required. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
|
|
| 0.5 W Chip Attenuators from DC to 20 GHz | |
Fixed Attenuator
from Smiths Interconnect
|
| The AT9XXF Series from Smiths Interconnect are Chip Attenuators that operate from DC to 20 GHz. They are available in attenuation values from 0 to 6 (in 1 dB increments) and 10 dB with an attenuation accuracy of ±0.75 dB. These attenuators can handle a CW input power of up to 0.5 W, a peak power of 5 W, and have a temperature coefficient of attenuation of ±200 ppm/°C. |
| |
Download Datasheet
Product Details | |
|
|
|
| Low-Profile Ceramic Core Chip Inductors from 1 to 56 nH | |
RF Inductor
from Coilcraft
|
| The 0603CT Series from Coilcraft are Low-Profile Ceramic Core Chip Inductors available in inductance values from 1.0 to 56 nH. They have a Q-factor of up to 95, a self-resonant frequency (SRF) of 16.0 GHz, and a DC resistance of less than 0.700 ohms. These inductors are available in surface-mount packages that measure 1.63 x 0.84 x 0.61 mm with Tin over Ni over Ag-Pt-glass frit termination. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged Low Noise Amplifier from 1 to 18 GHz | |
RF Amplifier
from AmpliTech
|
| The APTMP4-01001800-1520-D4 from AmpliTech is a Low Noise Amplifier that operates from 1 to 18 GHz. It provides more than 35 dB of gain with a noise figure of less than 1.5 dB and a P1dB of 20 dBm. The LNA is fabricated using state-of-the-art PHEMT technology and is MIL-883 and MIL-45208 certified. It has internal DC regulators which allow DC supply from 11 to 24 V and consumes less than 350 mA of current. |
| |
Download Datasheet
Product Details | |
|
|
|
| Detector Log Video Amplifier from 8 to 10 GHz | |
DLVA
from Quantic PMI (Planar Monolithics)
|
| The DLVA-8G10G-75-50-SFF from Quantic PMI (Planar Monolithics) is a Detector Log Video Amplifier (DLVA) that operates from 8 to 10 GHz. It has a dynamic range from -75 to 0 dBm and a tangential signal sensitivity (TSS) of -78 dBm. This DLVA has a log linearity of ±1.8 dB and a log slope of 50 mV/dB. It has a rise time of 30 ns, a fall time of 150 ns, and a recovery time of 500 ns (for 10 µs pulse width). |
| |
Download Datasheet
Product Details | |
|
|
|
| 12-Port Vector Network Analyzer from 300 kHz to 9 GHz | |
Vector Network Analyzer
from Copper Mountain Technologies
|
| The SN5090-12 from Copper Mountain Technologies is a 12-Port Vector Network Analyzer that operates from 300 kHz to 9 GHz. This VNA is an organic extension of the Compact VNA solutions offered by CMT. It enables the full complexity of VNA measurements, a streamlined calibration process, and reduced test times. |
| |
Download Datasheet
Product Details | |
|
|
|
| Ku-Band Integrated Microwave Assembly for UAS, SATCOM, and EW Applications | |
Integrated Microwave Assembly
from MtronPTI
|
| This Ku-Band Integrated Microwave Assembly (IMA) from MtronPTI has been designed for UAS, SATCOM and electronic warfare (EW) applications. It has Ku-band diplexer filters that are interconnected with two waveguide RF switches, a coupler and a low pass filter for harmonic suppression. The RF cables are fed from the diplexers to a separate RF module consisting of an RF board with low-noise amplifiers and an RF switch that switches the received signal between the two paths. |
| |
Download Datasheet
Product Details | |
|
|
|
| Dual-Thread, 96-Channel Encrypted Airborne GPS Receiver | |
GNSS Module
from BAE Systems
|
| The Airborne SAASM Receiver (ASR) 3.7-DS from BAE Systems is an Airborne GPS Receiver for L1 and L2 bands. It has 96 channels (48 hardware channels per thread) and hosts individual civil and military receivers on a single ASR form factor board. This receiver has a Wide Area Augmentation System (WAAS) capability for extremely accurate positioning. |
| |
Download Datasheet
Product Details | |
|
|
|
| Open Boundary Quad-Ridged Horn from 0.7 to 10 GHz | |
Horn Antenna
from ETS-Lindgren
|
| The 3164-08 from ETS Lindgren is an Open Boundary Quad-Ridged Horn Antenna that operates from 700 MHz to 10 GHz. This linear or circular polarized (with hybrid option) horn provides cross-polarization isolation of more than 20 dB. It has an open boundary design similar to two double-ridged waveguide antennas placed orthogonally to each other. |
| |
Download Datasheet
Product Details | |
|
|
|
| Cryogenic Circulator from 4 to 8 GHz | |
RF & Microwave Circulator
from DiTom Microwave
|
| The D3C4080Y from DiTom Microwave is a Cryogenic Circulator that operates from 4 to 8 GHz. It can handle an average forward input power of up to 20 W and a peak forward power of 30 W. This single junction circulator provides more than 16 dB of isolation and has an insertion loss of less than 0.4 dB. It is available in a module that measures 1.0 x 1.0 x 0.5 inches with SMA (male/female) connectors. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
|
| 4-Way Power Divider from 0.5 to 6 GHz | |
Power Divider
from Werbel Microwave
|
| The D-4066 from Werbel Microwave is a 4-Way Power Divider that operates from 0.5 to 6 GHz. It can handle a CW input power of up to 30 W, provides more than 25 dB of isolation, and has an insertion loss of less than 1.4 dB. This power divider has an amplitude balance of ±0.7 dB and a phase unbalance of ±10°. |
| |
Download Datasheet
Product Details | |
|
|
|
| Rugged, 100-Channel VHF Tactical Manpack Radio from 30 to 88 MHz | |
Software Defined Radio
from Datron
|
| The PRC2150 from Datron is a VHF Tactical Manpack Radio that operates from 30 to 88 MHz. It supports 100 programmable memory channels with channel spacing of 12.5 or 25 kHz. This radio has GPS capability embedded in the transceiver for accurate position and time-of-day capability. It provides an excellent dynamic range that allows co-located units to transmit and receive simultaneously on the same vehicle without diminished performance. |
| |
Download Datasheet
Product Details | |
|
|
|
|
|
|
